Author Topic: Portland Oregon SOHC owners (Read 71375 times)

the.barrage.pdx · « **Reply #300 on:** November 02, 2010, 02:11:20 PM »

I'd be up for making it out to one for sure Paul. Missed the last one as I was out at the coast. Would love to connect with others in PDX.

NickC · « **Reply #301 on:** November 02, 2010, 05:35:50 PM »

As long as I'm not underway I'm in. Bike is running pretty good (at the moment). I shouldn't have issues like I did last time.

NickC · « **Reply #302 on:** November 11, 2010, 08:49:33 PM »

So paul, any outlook on a shindig?

paulages · « **Reply #303 on:** November 11, 2010, 09:31:28 PM »

Quote from: Nick@lockitup on November 11, 2010, 08:49:33 PM

So paul, any outlook on a shindig?

i'm still playing catch-up... i haven't talked to anyone about it yet. i'll definitely keep you guys informed if its gonna happen.

Grnrngr · « **Reply #304 on:** December 14, 2010, 10:16:33 PM »

Until something better comes along....

http://portland.craigslist.org/clk/mcy/2113588610.html

NickC · « **Reply #305 on:** December 16, 2010, 12:18:07 PM »

Quote from: grnrngr on December 14, 2010, 10:16:33 PM

Until something better comes along....

http://portland.craigslist.org/clk/mcy/2113588610.html

Man, I'll be in California that week. $:-\$

On a different note, can anyone recommend a powder coating establishment in the Portland area?

paulages · « **Reply #306 on:** December 16, 2010, 12:23:17 PM »

Quote from: Nick@lockitup on December 16, 2010, 12:18:07 PM

Quote from: grnrngr on December 14, 2010, 10:16:33 PM
Until something better comes along....

http://portland.craigslist.org/clk/mcy/2113588610.html

Man, I'll be in California that week. $:-\$

On a different note, can anyone recommend a powder coating establishment in the Portland area?

I use ColorFX on NE 33rd, but you have to be very clear about what gets blocked or masked off or they'll get bearing surfaces and bolt holes. Not all, but I've had to clean up a few more than once.

NickC · « **Reply #307 on:** December 16, 2010, 12:50:54 PM »

Quote from: paulages on December 16, 2010, 12:23:17 PM

Quote from: Nick@lockitup on December 16, 2010, 12:18:07 PM
Quote from: grnrngr on December 14, 2010, 10:16:33 PM
Until something better comes along....

http://portland.craigslist.org/clk/mcy/2113588610.html

Man, I'll be in California that week. $:-\$

On a different note, can anyone recommend a powder coating establishment in the Portland area?

I use ColorFX on NE 33rd, but you have to be very clear about what gets blocked or masked off or they'll get bearing surfaces and bolt holes. Not all, but I've had to clean up a few more than once.

Awesome. I'm going to have most of the stuff blocked off whenever i bring it. I think one of the only things I'll have to make sure they mask are my spoke holes in hub and rim

Grnrngr · « **Reply #308 on:** December 16, 2010, 06:46:31 PM »

Used to work for TufCoat in Tigard...don't think I know anybody there anymore tho...what do you want to have done? Some friends just opened a machine shop in Oregon City and are talking about setting up something small...

NickC · « **Reply #309 on:** December 16, 2010, 08:10:30 PM »

I've got a frame ready to be coated
2 rims and hubs that need to be sandblasted/Powdercoated

Little_Horse · « **Reply #310 on:** December 16, 2010, 08:36:12 PM »

grnrngr thats funny you used to work at Tufcoat. That is were I take all my stuff. They have always done really good work for me. How long ago was it that you were there? I have been dealing with them for the last 5-6 yrs.

Grnrngr · « **Reply #311 on:** December 17, 2010, 05:37:29 AM »

heh...'95-'96..it's been a while..it was pretty cool though, did a lot of quad frames, a couple motorcycles, more than a few stock cars and hot rods...and go-karts

NickC · « **Reply #312 on:** December 28, 2010, 03:53:58 PM »

If anyone needs a 240v air compressor, I have one for sale! No longer have 240 available in the house....

coldright · « **Reply #313 on:** December 30, 2010, 09:00:21 PM »

Hey Y'all. My friend Matt, who owns Relapse Records, your favorite metal source, is opening a pizza place in town called Sizzle Pie. Grand Opening is on New Year's Eve officially at midnight, but a little bird tells me they'll be open earlier in the evening. Loads of vegan, vegetarian, and meaty pies made with local organics whenever possible. Address is close in on East Burnside. Check it out! http://sizzlepie.com/

Grnrngr · « **Reply #314 on:** December 30, 2010, 10:51:05 PM »

Quote from: Cold Industrial Right on December 30, 2010, 09:00:21 PM

Hey Y'all. My friend Matt, who owns Relapse Records, your favorite metal source, is opening a pizza place in town called Sizzle Pie. Grand Opening is on New Year's Eve officially at midnight, but a little bird tells me they'll be open earlier in the evening. Loads of vegan, vegatarien, and meaty pies made with local organics whenever possible. Address is close in on East Burnside. Check it out! http://sizzlepie.com/

Sweet!! good to see the local economy gettin stimulated...

nokrome · « **Reply #315 on:** January 02, 2011, 04:46:20 PM »

check it out portland people !!
http://theonemotorcycleshow.com/index.html

nokrome · « **Reply #316 on:** January 02, 2011, 04:59:37 PM »

look at nick@lockitups post count

Grnrngr · « **Reply #317 on:** January 02, 2011, 06:48:17 PM »

Cool!! I was wondering if it was gonna happen again...heh...drinks are $1 or $4...

paulages · « **Reply #318 on:** January 02, 2011, 11:41:29 PM »

Quote from: nokrome on January 02, 2011, 04:59:37 PM

look at nick@lockitups post count

Hey Phil, is your bike gonna be in the show?

pdxPope · « **Reply #319 on:** January 03, 2011, 11:55:46 AM »

Quote

http://theonemotorcycleshow.com/index.html

SWEET!

Paul, are you going to bring that leaky-ass POS again?

-JP

nokrome · « **Reply #320 on:** January 03, 2011, 12:10:50 PM »

Quote from: paulages on January 02, 2011, 11:41:29 PM

Quote from: nokrome on January 02, 2011, 04:59:37 PM
look at nick@lockitups post count

Hey Phil, is your bike gonna be in the show?

yah, Thor emailed me about it last week, can't wait

paulages · « **Reply #321 on:** January 03, 2011, 12:33:23 PM »

Quote from: nokrome on January 03, 2011, 12:10:50 PM

Quote from: paulages on January 02, 2011, 11:41:29 PM
Quote from: nokrome on January 02, 2011, 04:59:37 PM
look at nick@lockitups post count

Hey Phil, is your bike gonna be in the show?

yah, Thor emailed me about it last week, can't wait

Awesome... that bike deserves a little attention.

paulages · « **Reply #322 on:** January 03, 2011, 12:34:32 PM »

Quote from: pdxPope on January 03, 2011, 11:55:46 AM

Quote
http://theonemotorcycleshow.com/index.html

SWEET!

Paul, are you going to bring that leaky-ass POS again?

-JP

He didn't ask me, and I don't know if I'd have the time to sort it out by then anyway.. if he does ask, I'll probably just put my leaky-ass Norton in it.

Grnrngr · « **Reply #323 on:** January 03, 2011, 01:12:05 PM »

Maybe you could give a beer coaster gasket cuttin demo....

pdxPope · « **Reply #324 on:** January 04, 2011, 11:49:39 AM »

Quote

He didn't ask me, and I don't know if I'd have the time to sort it out by then anyway.. if he does ask, I'll probably just put my leaky-ass Norton in it.

Bring Anna. I'll be wanting a beer or three!

-JP

News:

Author Topic: Portland Oregon SOHC owners (Read 71375 times)

the.barrage.pdx