Author Topic: vintage hand tools (Read 43625 times)

dave500 · « **Reply #75 on:** July 12, 2013, 02:43:52 PM »

heres that toyota spanner,id like a set of these.

RAFster122s · « **Reply #76 on:** July 12, 2013, 04:17:45 PM »

ToyTuff would probably like a set of Toyota wrenches as well...

dave500 · « **Reply #77 on:** July 13, 2013, 03:01:58 AM »

i found that years ago,maybe part of say a crown tool kit?if you got crowns in the states?

RAFster122s · « **Reply #78 on:** July 13, 2013, 03:30:11 AM »

Yes, I believe we had the Crown model. That was a 70s or 80s model...

Terry in Australia · « **Reply #79 on:** July 13, 2013, 03:44:47 AM »

I've got a Datsun electric shaver that came with my uncle's old Datsun 2600. I think the Datsun 2600 was a competitor for the Toyota Crown, it was pretty fancy, it had a cigarette lighter and radio controls in the back of the console.

My cuz took it to the wreckers after my uncle died, it was pretty rusty, but the engine (which I think was the same as the 260Z) still ran great. Cheers, Terry.

dave500 · « **Reply #80 on:** July 13, 2013, 03:57:56 AM »

a datsun shaver?thats got hairs on it!

Terry in Australia · « **Reply #81 on:** July 14, 2013, 03:13:34 AM »

Quote from: dave500 on July 13, 2013, 03:57:56 AM

a datsun shaver?thats got hairs on it!

Well, it's got hairs in it Dave, I had to try it out.............

dave500 · « **Reply #82 on:** July 22, 2013, 12:53:28 AM »

i keep finding stuff,i found my very own old whitworth king dick spanner today.

72 yellow · « **Reply #83 on:** July 26, 2013, 05:33:47 PM »

My dad's Diamond Calk Horseshoe Company 10" cresent wrench. He purchased it in the the 1930's.

dave500 · « **Reply #84 on:** July 26, 2013, 08:18:54 PM »

good one yellow,youll keep that forever,if that tool could talk?we call those"shifters"here in australia,as you can shift its jaw,i sold that king dick spanner on our equivalent of craigs list for 5 bucks!ha,the guy lives two streets away!ide never use it,i have enough stuff anyway,having worked in the garbage transport industry for 11 years now ive gathered a lot of stuff,,not like those tv shows about hoarders though!ive cleaned up and flipped a lot of stuff ive found over the years,pays for a few beers.

goofy3392 · « **Reply #85 on:** July 27, 2013, 02:08:36 PM »

I was at my parents house today and went in the shed and went through my grandpa's tools we inherited. Nothing too old but thought I would share.

First is a battery terminal clamp puller #21. Brand is Bluebird. Did a google and I read they were bought out in the 1950's by Snap-on.

Then there was a 15/16 Barcalo Buffalo wrench and I don't know how old it is.

Sent from my ADR6410LVW using Tapatalk 2

754 · « **Reply #86 on:** July 27, 2013, 04:29:55 PM »

We should play tooltag..you take a CURRENT pic of an uncommon tool, to match the one shown...then you getto post the next tool.. That someone has to find and post a pic of..
Sound good?

FrankenFrankenstuff · « **Reply #87 on:** July 27, 2013, 05:26:23 PM »

Game on.

bill440cars · « **Reply #88 on:** July 27, 2013, 10:28:45 PM »

This is a really cool thread and as soon as I can get the time to, after we get moved
In at my Dad's home, I'll try to post up some pictures od tools my Dad and I have.
I have a few Whitworth wrenches, a crankshaft truing stand (Indian motorcycl)
Several others and no telling What my Dad has.

754 · « **Reply #89 on:** July 27, 2013, 11:03:40 PM »

I have the Diamond Calk, and that battery puller.. It also pulls Sportster tappet blocks. From ironhead cases.

dave500 · « **Reply #90 on:** July 28, 2013, 01:55:14 AM »

yeah i dig old obsolete forgotten tools.

Terry in Australia · « **Reply #91 on:** July 28, 2013, 04:44:59 AM »

Quote from: dave500 on July 28, 2013, 01:55:14 AM

yeah i dig old obsolete forgotten tools.

You'd love Frank then Dave...........

dave500 · « **Reply #92 on:** July 28, 2013, 04:50:09 AM »

manners terry,,manners!

Retro Rocket · « **Reply #93 on:** July 28, 2013, 03:53:18 PM »

Quote from: Terry in Australia on July 28, 2013, 04:44:59 AM

Quote from: dave500 on July 28, 2013, 01:55:14 AM
yeah i dig old obsolete forgotten tools.

You'd love Frank then Dave...........

Spitting coffee everywhere....

CBGhia · « **Reply #94 on:** July 28, 2013, 04:40:27 PM »

Quote from: goofy3392 on July 27, 2013, 02:08:36 PM

I was at my parents house today and went in the shed and went through my grandpa's tools we inherited. Nothing too old but thought I would share.

Then there was a 15/16 Barcalo Buffalo wrench and I don't know how old it is.

I was digging through some today and found a wrench with the same brand. Picture is blurry, but it says Barcalo Buffalo.

I found a really cool set of Open end/box end wrenches, but the 2 smaller ones seem to be made of an inferior metal.

Here is another group of wrenches. The top 7 are from a company called Williams and they are the "Superwrench", but obviously from different years.
Below that is a little Hazet, a serpentine Billings and a big old Bonney.

I still have a box of misc wrenches that I haven't messed with. There may be some cool ones in there.

754 · « **Reply #95 on:** July 28, 2013, 05:51:55 PM »

I,m gonna rip open my chest.......

Retro Rocket · « **Reply #96 on:** July 28, 2013, 07:05:03 PM »

Quote from: 754 on July 28, 2013, 05:51:55 PM

I,m gonna rip open my chest.......

Thats a little extreme....

goofy3392 · « **Reply #97 on:** July 28, 2013, 07:07:21 PM »

Quote from: CBGhia on July 28, 2013, 04:40:27 PM

Quote from: goofy3392 on July 27, 2013, 02:08:36 PM
I was at my parents house today and went in the shed and went through my grandpa's tools we inherited. Nothing too old but thought I would share.

Then there was a 15/16 Barcalo Buffalo wrench and I don't know how old it is.

I found a really cool set of Open end/box end wrenches, but the 2 smaller ones seem to be made of an inferior metal.

Is the biggest wrench 3/4 open end and 7/8 box end? I don't think I've seen combination wrenches with a box end like that before..but I'm pretty young and don't know much about vintage tools.
Sent from my ADR6410LVW using Tapatalk 2

CBGhia · « **Reply #98 on:** July 28, 2013, 07:22:52 PM »

Quote from: goofy3392 on July 28, 2013, 07:07:21 PM

Is the biggest wrench 3/4 open end and 7/8 box end? I don't think I've seen combination wrenches with a box end like that before..but I'm pretty young and don't know much about vintage tools.
Sent from my ADR6410LVW using Tapatalk 2

the biggest one is 7/8. There are a lot of wrenches that are strange to me in this box. I need to get on the garage journal and learn.

754 · « **Reply #99 on:** July 28, 2013, 09:39:57 PM »

Dayum,I was going to take a foto of the Diamond Calk, the battery puller, the King Dick, the Williams Superrrwrench, and them funny combinations, all in a group shot..but I forgot..

Even had it written on my BackHandPilot....

News:

Author Topic: vintage hand tools (Read 43625 times)