Author Topic: a few things you need to remove from your bike  (Read 13544 times)

0 Members and 2 Guests are viewing this topic.

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: a few things you need to remove from your bike
« Reply #75 on: December 09, 2013, 07:17:37 PM »
Dont forget to remove the fork springs, they are a bit heavy. If the whole Mag Lev thing is too difficult, you can always go for the proven 1 spoke solution. I.e. Remove 39 spokes from each wheel.
This, plus replace heavy hub with a teflon-tape spindle.

Offline WhyNot2

  • I'm finally an
  • Master
  • *****
  • Posts: 1,845
Re: a few things you need to remove from your bike
« Reply #76 on: December 10, 2013, 06:02:44 AM »
 :)  ;)  :D  ;D  :o  8)  ???  ::)  :P  :-[  :-X  :-\  :'(

Juice guys is just tooooooooo funny............................................with all the suggestions.

Good question from the op.............................................................wonder if it got answered correctly enough.
If it ain't raining, I'm riding.....~~{iii}?~~prost

If it sounds like I know what I'm talking about, it's because I cut and pasted from someone else.

DH

  • Guest
Re: a few things you need to remove from your bike
« Reply #77 on: December 10, 2013, 10:59:12 AM »
I am following all of these steps but am not sure how my bike is going to function. Just tried the no handlebar thing and it is pretty tough just holding onto the triple top. So I removed it. Now I am just holding onto the forks (like a hetero man)....and it wobbles before I hit the "ton". My bike is super light, and super fast....everyone wants to be like me, all women orgasm when I look into their eyes. My bike is so light lite fast superfast that I accidentally flew. Like off the ground. The clouds taste funny. On my last ride I bumped into Soichiro. He gave me a high five and told me my bike looked super fast and that I should remove all of the spokes and use a hub less magnet levitation system. So now that's how I'm rolling. Of course I drilled holes in the magnets to keep them light. Working on an electromagnetic system now. Pics soon. Thanks for all the help guys.



Hey Frankie, next time you run into Soichiro, mention this thread and ask why HE didn't think of all this cool stuff during R&D.....SLACKER!!!! ;D

Offline LesterPiglet

  • Old Timer
  • ******
  • Posts: 4,046
  • 1977 CB550F2
Re: a few things you need to remove from your bike
« Reply #78 on: December 10, 2013, 04:49:15 PM »
Umm, excuse me. Is this the five minute argument or the full half hour?
'Then' and 'than' are completely different words and have completely different meanings. Same with 'of' and 'have'. Set and sit. There, their and they're. Draw and drawer. Could care less/couldn't care less. Bought/brought FFS.


Les Ross.            Certified by a Professional

Offline brooze72

  • Talk to my friends here at SOHC4 if you need an
  • Expert
  • ****
  • Posts: 1,308
Re: a few things you need to remove from your bike
« Reply #79 on: December 10, 2013, 04:58:31 PM »
 ;D ;D ;D ;D
2011, 2012 & 2013 Godzilla Relay Rally Rider
"Hold on loosely...don't let go
 If you cling too tightly...you're gonna lose control"
1972 CB500K1 - restored rider
1981 CB650C - new project

Offline DustyRags

  • I'm not skilled, I'm just a
  • Hot Shot
  • ***
  • Posts: 720
  • Just try it and see what happens
Re: a few things you need to remove from your bike
« Reply #80 on: December 11, 2013, 10:00:02 AM »
Umm, excuse me. Is this the five minute argument or the full half hour?

At this point, I suspect it's the value pack.  ;D
1976 CB550K- sold
2005 Kawasaki Vulcan 500- sold
2000 CB750 Nighthawk - sold
1975 XL350 - crashed
2004 Suzuki Vstrom 650 - sold

Offline fdbrat

  • Hot Shot
  • ***
  • Posts: 275
Re: a few things you need to remove from your bike
« Reply #81 on: December 11, 2013, 10:22:26 AM »
Dont forget to remove the fork springs, they are a bit heavy. If the whole Mag Lev thing is too difficult, you can always go for the proven 1 spoke solution. I.e. Remove 39 spokes from each wheel.

Here it is... The one spoke mag. And it's for a Fixie... So you know it's fast.

Come on guys... where are all the pix for these mods?
1975 CB750F
4-4, Dyna S and box
5 ohm coils / 5k ohm caps
In- .05 / Ex- .08

San Luis Obispo

Offline DustyRags

  • I'm not skilled, I'm just a
  • Hot Shot
  • ***
  • Posts: 720
  • Just try it and see what happens
Re: a few things you need to remove from your bike
« Reply #82 on: December 11, 2013, 10:50:45 AM »
HERE!



 ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
1976 CB550K- sold
2005 Kawasaki Vulcan 500- sold
2000 CB750 Nighthawk - sold
1975 XL350 - crashed
2004 Suzuki Vstrom 650 - sold

Offline fdbrat

  • Hot Shot
  • ***
  • Posts: 275
Re: a few things you need to remove from your bike
« Reply #83 on: December 11, 2013, 11:08:45 AM »
Now cut off two spokes from each rim. Go!
1975 CB750F
4-4, Dyna S and box
5 ohm coils / 5k ohm caps
In- .05 / Ex- .08

San Luis Obispo

Offline 74750k4

  • Hot Shot
  • ***
  • Posts: 459
Re: a few things you need to remove from your bike
« Reply #84 on: December 11, 2013, 12:28:08 PM »
Ok. OK!!!  I promise I'll only ADD stuff!  Never take it off!