« previous next »
Pages: [1]   Go Down

Author Topic: Searching for after market Oil Filler Cap  (Read 2354 times)

0 Members and 1 Guest are viewing this topic.

Offline ziltoid

  • Full Member
  • *
  • Posts: 9
Searching for after market Oil Filler Cap
« on: April 03, 2014, 01:09:50 AM »
Hi!

I've been searching for a nice after market oil filler cap for a few hours with no luck so I was hoping someone in here might know of a few makers of bits and bobs.

I've rebuilt the bike so that my oil tank is visible. The white plastic cap isnt really doing it for me aesthaticaly.
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 16,513
  • Bike almost back to the 70's 2015
Re: Searching for after market Oil Filler Cap
« Reply #1 on: April 03, 2014, 02:38:46 AM »
Which bike, model and year will help to find out which part.
You can find the part number at www.cmsnl.com
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline vames

  • Expert
  • ****
  • Posts: 806
Re: Searching for after market Oil Filler Cap
« Reply #2 on: April 03, 2014, 08:45:06 AM »
Logged

Offline Bootlegger56

  • Butch
  • Hot Shot
  • ***
  • Posts: 401
  • Nuthin' taps ya out quicker than cole corn likker!
Re: Searching for after market Oil Filler Cap
« Reply #3 on: April 03, 2014, 08:26:55 PM »
Logged
Ya can travel near or ya can travel far; but no matter where ya go thar ya are!

750 K5
550 K1

Offline ziltoid

  • Full Member
  • *
  • Posts: 9
Re: Searching for after market Oil Filler Cap
« Reply #4 on: April 03, 2014, 10:39:57 PM »
Quote from: PeWe on April 03, 2014, 02:38:46 AM
Which bike, model and year will help to find out which part.
You can find the part number at www.cmsnl.com

Oh, sorry!

Its a CB750K7.

OEM-number 55105-392-000
Logged

Offline ncstatecamp

  • Expert
  • ****
  • Posts: 799
Re: Searching for after market Oil Filler Cap
« Reply #5 on: April 04, 2014, 12:09:35 AM »
check it, go to o'reillys they have this pretty slick one that says oil, chrome. got one of mine. looks pretty good, friction fit. that or i can sell you and extra one I got
Logged

Offline ziltoid

  • Full Member
  • *
  • Posts: 9
Re: Searching for after market Oil Filler Cap
« Reply #6 on: April 04, 2014, 12:31:19 AM »
Quote from: ncstatecamp on April 04, 2014, 12:09:35 AM
check it, go to o'reillys they have this pretty slick one that says oil, chrome. got one of mine. looks pretty good, friction fit. that or i can sell you and extra one I got

DOnt think I can find the right O'reillys... Im from Sweden, so Im not that familiar with sites and chains from the States... If you mean oreillyauto I cannot find any dipstick there....
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 16,513
  • Bike almost back to the 70's 2015
Re: Searching for after market Oil Filler Cap
« Reply #7 on: April 04, 2014, 02:51:47 AM »
order from EU will be cheaper than USA when you have to pay vat + fee.
David Silver has.
https://www.davidsilverspares.co.uk/parts/by-part-number/hpart_55105392000/
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline ziltoid

  • Full Member
  • *
  • Posts: 9
Re: Searching for after market Oil Filler Cap
« Reply #8 on: April 04, 2014, 05:53:44 AM »
Quote from: PeWe on April 04, 2014, 02:51:47 AM
order from EU will be cheaper than USA when you have to pay vat + fee.
David Silver has.
https://www.davidsilverspares.co.uk/parts/by-part-number/hpart_55105392000/

Thanks for the tip, but ive seen that one and its a boring plastic thingy.

I want a machined nice looking solid metal thing. Just for show =)
Logged

Offline Airborne 82nd

  • Expert
  • ****
  • Posts: 828
Re: Searching for after market Oil Filler Cap
« Reply #9 on: April 04, 2014, 06:48:35 AM »
mine is chrome metal I think it is stock but not sure 750K 1978.
Logged

Offline ncstatecamp

  • Expert
  • ****
  • Posts: 799
Re: Searching for after market Oil Filler Cap
« Reply #10 on: April 04, 2014, 01:44:45 PM »
http://www.oreillyauto.com/site/c/detail/MRG0/9815/N0551.oap?ck=Search_N0551_-1_-1&pt=N0551&ppt=C0088

http://www.amazon.com/Mr-Gasket-9815-Filler-Plug/dp/B000BWE4O0

its a mr. gasket 9815

it is a push in style, no dipstick though. fits very snug. I ended up making a dipstick out of a piece of zip tie with some duct tape on it. works fine.
Logged
Pages: [1]   Go Up
« previous next »