« previous next »
Pages: [1]   Go Down

Author Topic: '71 Honda CB500F cylinder compression loss  (Read 1759 times)

0 Members and 1 Guest are viewing this topic.

Offline Rain

  • Full Member
  • *
  • Posts: 1
'71 Honda CB500F cylinder compression loss
« on: March 22, 2015, 03:28:14 PM »
Greetings more-knowledgable-than-I motorcycle owners,

I have been having a significant issue with my 71 Honda CB500 since summer that I have somewhat diagnosed and now am seeking some help delving into it.

During the summer the bike suddenly started to seemingly have its power get cut while riding it. It wouldn't put out like it was getting fuel cut off but all power would just suddenly leave the bike. After taking it to the mechanic, the ignition switch got replaced and an issue with compression in the cylinders was diagnosed. There is a 15% loss in cylinder one and a 55% loss in cylinder four while the rest are fine. It currently wont start and I'm seeking some guidance as to a starting point on the work. My current guess is to check out gaskets and piston rings but that's as far as I've gotten conceptually.

My apologies if I missed a similar thread. If you know of any info already on the topic please send me a reference.
Thanks for any help!
Logged

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,271
  • Ride like you're invisible
Re: '71 Honda CB500F cylinder compression loss
« Reply #1 on: March 22, 2015, 04:17:35 PM »
Buy yourself a compression tester and verify that what you were told is accurate.  Simple to do but if you need help there will be plenty of guidance here.   Welcome to the forum, shop manual should be downloadable from this site...Larry
Logged

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,189
  • ... but some animals are more equal than others.
Re: '71 Honda CB500F cylinder compression loss
« Reply #2 on: March 23, 2015, 09:04:18 AM »
I always found it difficult to do a compression test on a CB500. The Honda dealer did it for me in a jiffy. No need to buy stuff and then ask yourself if you did it right or not.
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Offline Bodi

  • Really Old Timer ...
  • *******
  • Posts: 5,703
Re: '71 Honda CB500F cylinder compression loss
« Reply #3 on: March 23, 2015, 12:37:04 PM »
difficult?
1- remove plugs
2- screw adapter into a plug hole
3- connect gauge, crank engine, record "dry" reading
4- remove gauge, squirt oil into adapter, repeat #3 for "wet" reading
5- repeat #2-#4 for the other 3 cylinders

My experience with shop mechanics is ... poor at best. If I do it myself at least I know what went wrong. I've had shops cross-thread sparkplugs, strip cover screw threads, crack tail light lenses, and even light a fire under a car hood and melting a bunch of wires... all without telling me - just to let me find them the next time I looked so it couldn't be definitely blamed on them.
Logged
Pages: [1]   Go Up
« previous next »