Author Topic: Clutch hub rubbers - need a set?  (Read 5002 times)

0 Members and 1 Guest are viewing this topic.

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Clutch hub rubbers - need a set?
« Reply #25 on: February 12, 2017, 04:09:10 PM »
We're you able to Paypal the funds overseas?

Patrick didn't leave me his PayPal name.  Can't send if I don't know where...

George
« Last Edit: February 12, 2017, 04:15:44 PM by gschuld »

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Clutch hub rubbers - need a set?
« Reply #26 on: February 12, 2017, 04:14:56 PM »
Mike, thanks,  now about that so called ball game last Sunday......lol. Yes PeWe,  it's a JMR Billet Big Block, Nikasil, and JE 72mm 12.5 to 1 big bore kit, going on new Carrillo's and Cycle X crank as long as runout ok. Should be fine. Cam probably a billet Megacycle 125/75 and a Stage IV Mike Rieck cylinder head with beehive springs and 34mm intakes, small stems etc. RS34's Thanks again Mike! Let's go racing,K, Bill

So in short, a mere "budget motor"   ;D

George
George you know you can place a number of more descriptive words in front of the word budget. ;D I always say a budget is a good start!
Keeping to the thread.....sent my money to Patrick today...get on board ladies.

Mike,

I've been trying to reduce my swearing, and I couldn't think of any other descriptive words to put in front of the word budget that didn't break my new effort ;D.

Quality is NEVER cheap.  And you my friend are the embodiment of quality.   ;)

It is what it is...you're gold in my book.

George
« Last Edit: February 12, 2017, 04:16:40 PM by gschuld »

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Clutch hub rubbers - need a set?
« Reply #27 on: February 12, 2017, 04:25:57 PM »
We're you able to Paypal the funds overseas?

Patrick didn't leave me his PayPal name.  Can't send if I don't know where...

George

PayPal was fine. Even the friends and family option worked. I would send him another note to move things along.
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Clutch hub rubbers - need a set?
« Reply #28 on: February 12, 2017, 05:19:38 PM »
Good deal, will do.  He mentioned some people having trouble using PayPal overseas.

Slikwilli, can you PM me Patrick's PayPal name so I can proceed?

Did you guys receive an email with a PayPal bill from Patrick or just send money his way.  I haven't received the PayPal bill he mentioned yet.

George
« Last Edit: February 12, 2017, 05:44:55 PM by gschuld »

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Clutch hub rubbers - need a set?
« Reply #29 on: February 12, 2017, 08:36:51 PM »
Well, PayPal send for 3 kits.

George

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,535
  • Bike almost back to the 70's 2015
Re: Clutch hub rubbers - need a set?
« Reply #30 on: February 13, 2017, 01:17:33 AM »
Mike, thanks,  now about that so called ball game last Sunday......lol. Yes PeWe,  it's a JMR Billet Big Block, Nikasil, and JE 72mm 12.5 to 1 big bore kit, going on new Carrillo's and Cycle X crank as long as runout ok. Should be fine. Cam probably a billet Megacycle 125/75 and a Stage IV Mike Rieck cylinder head with beehive springs and 34mm intakes, small stems etc. RS34's Thanks again Mike! Let's go racing,K, Bill

Bill, you plan a new thread for that build? With video of the start so we all can hear the magic!!
//Per
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Aurelia B20

  • Full Member
  • *
  • Posts: 38
    • Honda workshop in Lyon (France)
Re: Clutch hub rubbers - need a set?
« Reply #31 on: February 13, 2017, 09:37:50 AM »
Now I understand why we sold 9 kits to USA in one week !  8)

Thanks to all, especially Matt, George and Alan for the orders, and Mike Rieck for the kind words about our kit's quality.

I have to tell you the story of these kits : I am a fan of the 60's and 70's Honda bikes and like to restore them to the highest original standards. I met another crazy guy, like me, on a French Honda forum, and we tried to find a solution about the CB750 and Goldwing primary damper rubbers that are not available from Honda.

This another crazy guy, Jean, worked all his life for Renault, one of the greatest car's manufacturers in France. Now retired, like me, he knew very well all the subcontractors of Renault as he was Quality Manager. He contacted a specialist in France, established technical specifications and quality controls. Then we had to pay the mould, very expensive, and launched a first batch of 20 kits. Tests made on our CB750 were excellent and we sold the other kits to forum friends.

Today we have sold more than 100 kits and made last year some improvement, especially concerning rubber's diameter : + 0.15 mm in the aim to reduce the operating clearance.

About shipping cost : each kit weighs 0.110 kg, shipping from France to USA by Colissimo (French Post service) with tracking and insurance is as follows :
- under 0.5 kg : €23.70  -  OK for 1 to 3 kits + packaging
- under 1 kg : €26.30  -  OK for 4 to 7 kits + packaging
- under 2 kg : €36.10  -  OK for 8 to 17 kits + packaging

About paypal : it seems that paying from US to France by "friends and family" system is free of charge if you have cash on your account. If you pay by CC, there is near 4% fee for us.

Please ask before paying as Jean in Paris and me in Lyon had our own stock, so you have to pay Jean or me, not the same acccount  8)

A last word : as we are retired and not professional sellers, we have no margin on these kits when we sell them at 87€, that's the reason why we ask 4% more for paypal fee  :'(

You can contact me at honda60.70s*gmail.com, it's easier for me as I receive the mails directly on my mobile phone, I prefer emails than MP on the forum  :)

Cheers
« Last Edit: February 13, 2017, 09:39:38 AM by Aurelia B20 »
Patrick
________________________________________________________________________________________
CB 750 K1 - CB 500 K1 - CB 450 K2 - CB 350 K2 - SL125 K1 - Dax ST70 - C50M 1975 - CF50 1967 - CZ100 1965

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Clutch hub rubbers - need a set?
« Reply #32 on: February 13, 2017, 10:01:40 AM »
This is a great service Patrick, good for you both.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,560
  • Big ideas....
Re: Clutch hub rubbers - need a set?
« Reply #33 on: February 13, 2017, 01:07:22 PM »
 That's a good story Patrick. Nice to know the expertise behind the product. ;)
Owner of the "Million Dollar CB"

Offline Haybus

  • Enthusiast
  • **
  • Posts: 177
Re: Clutch hub rubbers - need a set?
« Reply #34 on: February 13, 2017, 09:55:12 PM »
I agree, that's a great story and I really appreciate you providing this service for us.

Alan
75 CB750
76 KZ900