Author Topic: Big Thank You to JMR Porting (Read 5558 times)

cb550fcafe · « **on:** September 27, 2018, 04:54:10 AM »

Huge thanks to Mike Rieck at JMR Porting! My Light Weight Super Vintage CB350 twin won 7/9 races this year and the USCRA Championship. Made great power, would hold 12,500 rpm all day and ran every lap. Off to Barber and the big show next week. Thanks Mike! (I know it isn't a SOHC4 but its still fast)

gschuld · « **Reply #1 on:** September 27, 2018, 05:59:17 AM »

Mike’s legend continues...👍

George

bwaller · « **Reply #2 on:** September 27, 2018, 06:17:03 AM »

I believe you were at Mosport too? Mike and I discussed your good work.

It's SOHC and a race bike. Fits nearly perfectly for me!

MRieck · « **Reply #3 on:** September 27, 2018, 06:32:08 AM »

Kevin and Brent.....you guys make my work look good. Will be looking for more power from that 350 over the winter.

dragracer · « **Reply #4 on:** September 27, 2018, 06:41:39 AM »

Congratulations on that accomplishment.

RAFster122s · « **Reply #5 on:** September 27, 2018, 05:27:42 PM »

Very Cool! Congrats to the guy behind the bars (MC bars...

) and to the artist behind the air tool and flow bench!
David

754 · « **Reply #6 on:** September 27, 2018, 07:12:13 PM »

Sounds great, what do you all have done to the 350 2win ?
How much hp ?

Medyo Bastos · « **Reply #7 on:** September 28, 2018, 04:17:50 AM »

congrats, and surely earned results!

cb550fcafe · « **Reply #8 on:** September 28, 2018, 11:24:50 AM »

Quote from: bwaller on September 27, 2018, 06:17:03 AM

I believe you were at Mosport too? Mike and I discussed your good work.

It's SOHC and a race bike. Fits nearly perfectly for me!

Yes, I was there. Had to leave before main event on Sunday but I picked up my new CMR Seeley Cb350 frame. I ran it last weekend. Gonna be great. I love Mosport. I may do more with VRRA in 2019.

cb550fcafe · « **Reply #9 on:** September 28, 2018, 11:29:36 AM »

Quote from: 754 on September 27, 2018, 07:12:13 PM

Sounds great, what do you all have done to the 350 2win ?
How much hp ?

Don't really want to share all of what we did but suffice to say everything has been massaged. I do have a Cappellini oil system with gear pump, cooler and external lubricated cam bearings, PVL ignition, Mikuni carbs, Mega cycle cam, overbore, crank work, JMR Magic head, Swarbick pipes, ARP head studs. Haven't had on dyno but will be this coming Thursday at Barber. Hoping for close to 40. Racing against 48. For comparison my stock CB350 makes 24.

bike mods, Yamaha FZR600 front forks, Water Buffalo front brake massaged by MM at Vintage Brake (pitcure has disc brake, also MM Vintage Brake XS650 with Brembo caliper, AHRMA disc ok), Works performance Shocks, welded up frame seams, Excel wheels by Buchanan, Continental Classic race tires, Airtech body work.

bwaller · « **Reply #10 on:** September 28, 2018, 05:32:34 PM »

I'm glad you secured a frame from Denis. He's made improvements through the years so hopefully it helps do what you're looking for.

Yeah I love Mosport.

RAFster122s · « **Reply #11 on:** September 28, 2018, 06:04:41 PM »

I always enjoyed watching racing on TV at Mosport, Mid-Ohio, and Laguna Seca!
Cannot imagine what racing or riding or a track school there might be like.
I have enjoyed a lap, faster than parade ( we were only supposed to go up to 55 mph but several of us broke the rules to 90-100 down the back straightaway) at Indy many years ago at a car club meet. No slap on the wrist at that time...but that was in '95.

simon#42 · « **Reply #12 on:** September 29, 2018, 02:16:48 AM »

i was at a classic meeting some years ago with colin seeley , there were ten or twelve seeley framed bikes there and he reckoned he hadnt made any of them!

bwaller · « **Reply #13 on:** September 29, 2018, 03:25:34 AM »

I suppose in a way that's a show of utmost respect Simon!

RAFster122s · « **Reply #14 on:** September 29, 2018, 04:05:55 AM »

Quote from: bwaller on September 29, 2018, 03:25:34 AM

I suppose in a way that's a show of utmost respect Simon!

Flattery I think instead of respect, the saying I recall is "Imitation is the sincerest [form] of flattery." - Charles Caleb Colton
Imitation without change is merely piracy in my mind; when referring to an object, not a behavior.

Either way, customer framed bikes that work well are cool, despite or independent of whom made them or designed them...and yes you would have to respect and admire someone's work to replicate a copy of it...building a frame is not child's play, it is a lot of hours of fabrication.

David

TimV840 · « **Reply #15 on:** September 29, 2018, 06:15:54 AM »

I'd be surprised if you only see 40 Kevin. But we all know numbers on a dyno don't always tell the whole story.

Good luck at Barber. Should be a good battle judging by the grid sheet! I hope to be there next year on the same frame, as well as my 750 triple.

TimV

quote author=cb550fcafe link=topic=174353.msg2029006#msg2029006 date=1538159376]

Quote from: 754 on September 27, 2018, 07:12:13 PM

Sounds great, what do you all have done to the 350 2win ?
How much hp ?

Don't really want to share all of what we did but suffice to say everything has been massaged. I do have a Cappellini oil system with gear pump, cooler and external lubricated cam bearings, PVL ignition, Mikuni carbs, Mega cycle cam, overbore, crank work, JMR Magic head, Swarbick pipes, ARP head studs. Haven't had on dyno but will be this coming Thursday at Barber. Hoping for close to 40. Racing against 48. For comparison my stock CB350 makes 24.

bike mods, Yamaha FZR600 front forks, Water Buffalo front brake massaged by MM at Vintage Brake (pitcure has disc brake, also MM Vintage Brake XS650 with Brembo caliper, AHRMA disc ok), Works performance Shocks, welded up frame seams, Excel wheels by Buchanan, Continental Classic race tires, Airtech body work.
[/quote]

simon#42 · « **Reply #16 on:** September 29, 2018, 06:38:03 AM »

Quote from: RAF122S on September 29, 2018, 04:05:55 AM

Quote from: bwaller on September 29, 2018, 03:25:34 AM
I suppose in a way that's a show of utmost respect Simon!
Flattery I think instead of respect, the saying I recall is "Imitation is the sincerest [form] of flattery." - Charles Caleb Colton
Imitation without change is merely piracy in my mind; when referring to an object, not a behavior.

Either way, customer framed bikes that work well are cool, despite or independent of whom made them or designed them...and yes you would have to respect and admire someone's work to replicate a copy of it...building a frame is not child's play, it is a lot of hours of fabrication.

David

piracy was how he seemed to regard it , some of the supposed copies are rubbish which doesnt help .
have not seen dennis`s seeley copy but his version of a harris frame looked ok so it should be decent enough .

754 · « **Reply #17 on:** September 29, 2018, 09:32:20 AM »

I think bike had some pretty fancy bits some ofvthe Cappelini bits.
The owner said fork lowers are made in Hungary not the double pinch.. nice..

Sam Green Racing · « **Reply #18 on:** September 29, 2018, 10:21:31 AM »

Hey guys, Mike don't only do big sohc4s.
I remember when I was with him, a guy brought in a CB160 bored to 200cc.
He was fed up of finishing last and getting lapped and asked Mike could he port it and tune it.
To start with, I suggested he dropped it to 175 and fitted a Megacycle cam.
Mike worked his magic on it and it won first time out.

MRieck · « **Reply #19 on:** September 29, 2018, 04:18:14 PM »

Quote from: Sam Green Racing on September 29, 2018, 10:21:31 AM

Hey guys, Mike don't only do big sohc4s.
I remember when I was with him, a guy brought in a CB160 bored to 200cc.
He was fed up of finishing last and getting lapped and asked Mike could he port it and tune it.
To start with, I suggested he dropped it to 175 and fitted a Megacycle cam.
Mike worked his magic on it and it won first time out.

Sam....that was a fella named Gene Duffy. Super nice guy from New Hampshire. I think Gene's secret weapon was the fact he weighed about 120 pounds?

He would joke about buying doughnuts and passing them out to the competition.
Actually the bike made good power, worked very well and won a lot of races. He sold it to a guy in Florida I think and that person was winning races despite the head needed a good freshening.
I have had the opportunity and pleasure to work with some good builders/racers both in the USA and Europe. I consider myself very fortunate.

simon#42 · « **Reply #20 on:** September 30, 2018, 04:32:01 AM »

and you have worked with brent !

MRieck · « **Reply #21 on:** September 30, 2018, 05:45:12 AM »

Quote from: simon#42 on September 30, 2018, 04:32:01 AM

and you have worked with brent !

Right you are Simon!

Sam Green Racing · « **Reply #22 on:** September 30, 2018, 06:37:02 AM »

Mike, Gene is in Bluffton, South Carolina now but not heard from him in a while.

MRieck · « **Reply #23 on:** September 30, 2018, 05:02:44 PM »

Quote from: Sam Green Racing on September 30, 2018, 06:37:02 AM

Mike, Gene is in Bluffton, South Carolina now but not heard from him in a while.

There he is....all 120lbs of him. A great guy who I really enjoyed working with. Someday I'll write something in the open section about how motorcycles have changed my life and the lives of my family in the most positive ways I can ever imagine.

Sam Green Racing · « **Reply #24 on:** October 01, 2018, 03:14:15 AM »

Awesome Murphy. hahaha.

News:

Author Topic: Big Thank You to JMR Porting (Read 5558 times)