« previous next »
Pages: [1]   Go Down

Author Topic: need orings for intake boots  (Read 349 times)

0 Members and 1 Guest are viewing this topic.

Offline mrenfro

  • Full Member
  • *
  • Posts: 33
need orings for intake boots
« on: February 23, 2022, 07:59:05 PM »
hello alll,

ordered some 27 X 2.4 mm o-rings for the intake boots for my cb350f and they are too small.  When looking at various parts houses, however, they show 27 X 2.4 mm o-rings.

Anybody else gone through this and know the proper size?

thanks
Logged

Offline Nurse Julie

  • Hot Shot
  • ***
  • Posts: 366
Re: need orings for intake boots
« Reply #1 on: February 24, 2022, 10:25:59 AM »
Do you mean manifold O rings? If so they are 27 mm ID x 2.4 cross.
« Last Edit: February 24, 2022, 10:30:42 AM by Nurse Julie »
Logged
Trust me I'm a Nurse, I promise it won't hurt....much

Offline david 750f

  • Expert
  • ****
  • Posts: 827
  • 1976 CB750F
Re: need orings for intake boots
« Reply #2 on: February 24, 2022, 12:43:18 PM »
Are you measuring the inside or outside diameter? Measurement should be taken of the inside diameter. ;)
Logged
1976 CB 750F

Offline mrenfro

  • Full Member
  • *
  • Posts: 33
Re: need orings for intake boots
« Reply #3 on: February 24, 2022, 05:54:39 PM »
ok thanks
Logged
Pages: [1]   Go Up
« previous next »