Author Topic: 79' KZ750 .... "Gutter Brat" (Read 105341 times)

Zaipai · « **Reply #50 on:** June 06, 2010, 10:32:40 AM »

Sorry spikey, I did read that quote, I should know not to post with such little sleep..

Nice.. Please post a vid (I am sure you will anyway) when you get it running, would love to hear what that Twin sounds like..

.: Scott :.

Spikeybike · « **Reply #51 on:** June 06, 2010, 11:49:10 AM »

Quote from: Zaipai on June 06, 2010, 10:32:40 AM

I should know not to post with such little sleep..

i'm pretty guilty of that as well

....pretty often actually

sleep is overrated

Spikeybike · « **Reply #52 on:** June 08, 2010, 12:36:25 PM »

Zaipai · « **Reply #53 on:** June 08, 2010, 06:48:55 PM »

Nice work on the passenger pegs!!! Did you do the rider pegs as well?

.: Scott :.

Spikeybike · « **Reply #54 on:** June 08, 2010, 08:04:55 PM »

yup , sure did ... in 2007

(1st post)

Spikeybike · « **Reply #55 on:** June 08, 2010, 08:23:43 PM »

uploading a vid .... waiting waiting ....waiting

come back in about 40min and it'll be up .. (sttupid fancy high def camera)

i'm way too buzzed to just sit here on the PC,...i always drink too fast when i do that... starring at the key board is kinda givin me the spins ..... why am i still typing then your wondering ... easy answer...cuz i'm freakin drunk

Spikeybike · « **Reply #56 on:** June 08, 2010, 09:11:01 PM »

four_shot · « **Reply #57 on:** June 08, 2010, 09:23:59 PM »

Get some sleep you lush.

Spikeybike · « **Reply #58 on:** June 09, 2010, 11:18:45 AM »

four-shot!!! i was starting to think you were done with this forum

i'm gonna have to get over to your place and see your wifes KZ .. maybe get/give some ideas

Spikeybike · « **Reply #59 on:** June 09, 2010, 03:10:19 PM »

starting to be unsure about the exhaust .. thinking i might get some slip-ons, or maybe scrap it and get a 2into1 kit

i'm either gonna swirl the chain guard or paint it, i can't decide witch would look better

i think the drag bars turned down is a much better look, and feels about the same

that just makes me laugh... i love it

Zaipai · « **Reply #60 on:** June 09, 2010, 05:27:55 PM »

Very cool. Yes replace that exhaust or mod it but it has to be changed..

.: Scott :.

Retro Rocket · « **Reply #61 on:** June 09, 2010, 06:08:53 PM »

Hi Spikey,how about a CL-350 style exhaust but 1 pipe on either side instead of both on the one side?

Mick

Skonnie Boy · « **Reply #62 on:** June 10, 2010, 08:48:04 PM »

You gonna have this up and running for Mods v Rockers?

Spikeybike · « **Reply #63 on:** June 11, 2010, 07:55:33 AM »

Quote from: Skonnie Boy on June 10, 2010, 08:48:04 PM

You gonna have this up and running for Mods v Rockers?

na i wish ... i'll be on my other bike for MVR .. should make me easier to find too ... cuz it's lookin like i'll be going by myself

sangyo soichiro · « **Reply #64 on:** June 11, 2010, 02:49:14 PM »

I too dig the fork leg fix.

Questions:
That tank looks really cool, but I was wondering about putting the clear coat on. How does that work painting a tank without primer? Is there a special paint you're using, or just clear coat it and hope for the best?

The JB-Weld in the head... that's the second time I've seen someone do that. I've never played with JB-Weld... is it that good?! Seems like the head'll get pretty hot...

I like the chain guard! Actually got me thinking about doing something similar to mine. I might make a shorty guard out of aluminum or something....

Spikeybike · « **Reply #65 on:** June 11, 2010, 06:35:11 PM »

i was gonna just get some engine enamel clear and make really thin coats , wet sanding between them , i've done it before

i made a coffee table for someone ,with the top of the table being all swirled , and the clearcoat held for about 2 or 3 years ...but that was a table that got used ..... i won't see anyone puttin a drink on my tank

i have jb welded engine blocks before , i'm not worried about the heat , i'm worried about the tensile strength (the pipe pulling it's self off the head)

i was just gonna skip the chain guard, but where the passenger pegs are , i was thinkin the chain might pull in a pant leg or two ....and since one of those pant legs might be my boys.... chainguard

sangyo soichiro · « **Reply #66 on:** June 11, 2010, 06:43:21 PM »

Quote from: Spikeybike on June 11, 2010, 06:35:11 PM

....and since one of those pant legs might be my boys.... chainguard

Good idea.

Zaipai · « **Reply #67 on:** June 11, 2010, 07:05:03 PM »

Why "engine enamel clear" ? Does it hold up better?

The autoshop up town has a shock (truck I believe) JB Welded to a stand with a handle on the top, you can push or pull with as much weight as you want.. Been that way for 2 years and its still JB'd to the stand..

.: Scott :.

Spikeybike · « **Reply #68 on:** June 11, 2010, 07:10:30 PM »

it's more resistant to chemicals and has a higher temp rating ... i use it on everything ,, frame, sheet metal, fiberglass stuff ... just kind of a "stick with what works" type thing

Zaipai · « **Reply #69 on:** June 11, 2010, 07:22:33 PM »

Good to know, I will use that next time.. Is there a brand name you prefer?

.: Scott :.

Spikeybike · « **Reply #70 on:** June 11, 2010, 07:32:54 PM »

not really ... whatever is at autozone ... i just stay away from the off brands and cheap stuff

Skonnie Boy · « **Reply #71 on:** June 11, 2010, 09:47:43 PM »

Quote from: Spikeybike on June 11, 2010, 07:55:33 AM

Quote from: Skonnie Boy on June 10, 2010, 08:48:04 PM
You gonna have this up and running for Mods v Rockers?

na i wish ... i'll be on my other bike for MVR .. should make me easier to find too ... cuz it's lookin like i'll be going by myself

Oh, Spikeybike, you'll never walk alone.

Wait. That should read, "drink and talk #$%* about bikes".

Spikeybike · « **Reply #72 on:** June 11, 2010, 10:24:50 PM »

Zaipai · « **Reply #73 on:** June 12, 2010, 06:45:03 AM »

Quote from: Spikeybike on June 11, 2010, 07:55:33 AM

Quote from: Skonnie Boy on June 10, 2010, 08:48:04 PM
You gonna have this up and running for Mods v Rockers?

na i wish ... i'll be on my other bike for MVR .. should make me easier to find too ... cuz it's lookin like i'll be going by myself

Where/When is MVR?

.: Scott :.

MJL · « **Reply #74 on:** June 12, 2010, 07:30:18 AM »

Quote from: Zaipai on June 04, 2010, 05:21:03 PM

Like the tank Spikey.. That green one is pretty slick MJL..

Are you doing up one like the green one?

.: Scott :.

It's a possibility, I love the way it looks, and I just happened to have a cb100 gas tank fall into my lap the other day, that tank is an XR200 tank.

News:

Author Topic: 79' KZ750 .... "Gutter Brat" (Read 105341 times)