Author Topic: "INSPIRATION GALLERY " (Read 2259804 times)

Flying J · « **Reply #7025 on:** May 15, 2011, 11:34:53 PM »

754 you dont know about the RCB 1000!!!?
The engine of the Honda RCB1000 as it was known was based on the CB750 four, but with numerous modifications. A bore and stroke of 68 x 64.8 mm gave a total capacity of 941.3 cc (initially a capacity of 915 cc was mentioned). Compression ratio was 11 : 1, claimed power output 115 bhp at 9,500 rpm, although at least one bike was measured at 118 bhp with a torque of 10.2 kg.m at 8,500 rpm.

Its common knowledge.....

ok, just kidding, i did some google searching.
http://vf750fd.com/Joep_Kortekaas/honda_endurance_history.html

Look whos running comstars...

Well at least 1

Ecosse · « **Reply #7026 on:** May 16, 2011, 12:38:18 AM »

thanks ff for that info. i'd seen those bikes before but didn't know what the hell i was looking at.

i'm used to it.

and... comstars got some race cred!

edit: excellent link too!

Ecosse · « **Reply #7027 on:** May 16, 2011, 12:49:16 AM »

ok, not an exotic race bike. but i like it.

there's something to be said for a solid and subtle daily rider. kinda how i wanna do mine.

B.O.X.N.I.F.E. · « **Reply #7028 on:** May 16, 2011, 01:28:51 AM »

The geared primary is also pretty neato

JustinLonghorn · « **Reply #7029 on:** May 16, 2011, 05:16:30 AM »

This bike inspires me, but only because I just built it, ha!

Now to start on my 400F.

754 · « **Reply #7030 on:** May 16, 2011, 08:05:06 AM »

FFJ, the blue bike has a different topend than the bronze RCB, lowerend looks ?.. looks like outboard support on the countershaft.
I think that bike is running a comstar centre and spokes mated to a Wider rim with a center flange like a comstar.. look at the rim edge its not as square looking as the too skinny Comstars...

Flying J · « **Reply #7031 on:** May 16, 2011, 11:06:32 AM »

Yeah the bronze one is different. Its a later bike they built. I didnt read all the details on it.

ev0lve · « **Reply #7032 on:** May 16, 2011, 01:28:26 PM »

Nice work

Tintop · « **Reply #7033 on:** May 16, 2011, 02:29:33 PM »

Quote from: 754 on May 16, 2011, 08:05:06 AM

FFJ, the blue bike has a different topend than the bronze RCB, lowerend looks ?.. looks like outboard support on the countershaft.
I think that bike is running a comstar centre and spokes mated to a Wider rim with a center flange like a comstar.. look at the rim edge its not as square looking as the too skinny Comstars...

Honda ran Comstars on the Bol D'or bikes. They had magnesium hubs and wider rims. There was an original set on eBay for 3K.

Free Booter · « **Reply #7034 on:** May 16, 2011, 07:46:38 PM »

I'm sure everyone's seen 'em, but for those who aren't familiar....mmm....the 80's...
http://www.youtube.com/watch?v=iO9YVYg4FyU&feature=player_embedded#at=194

ev0lve · « **Reply #7035 on:** May 17, 2011, 07:44:09 AM »

Quote from: Free Booter on May 16, 2011, 07:46:38 PM

I'm sure everyone's seen 'em, but for those who aren't familiar....mmm....the 80's...
http://www.youtube.com/watch?v=iO9YVYg4FyU&feature=player_embedded#at=194

You should have labeled that NSFW - being classic bike porn and all

motocyconomad · « **Reply #7036 on:** May 17, 2011, 10:52:30 AM »

ya I agree and the other Honda one is nice too
I am totally very upset by how that Black Falcon Vincent is so..................aaaarrrrggg awesome
I wanna see it get dirty like the kneeslider guy said

Ecosse · « **Reply #7037 on:** May 19, 2011, 12:06:17 AM »

Ecosse · « **Reply #7038 on:** May 19, 2011, 12:08:10 AM »

MoMo · « **Reply #7039 on:** May 19, 2011, 05:43:31 AM »

Quote from: Ecosse on May 19, 2011, 12:06:17 AM

.

That is one scary looking bike to ride, reminds me of the huge motors that used to be crammed into little Willys for drag racing...Larry

754 · « **Reply #7040 on:** May 19, 2011, 08:06:46 AM »

That is one bike in dire need of a custom frame..!1

Q re Comstars?
Did the bolDOr Honda use the regular Comstars, or the other type with 3 double spokes with holes drilled/punched in them?

weekend_junkie · « **Reply #7041 on:** May 19, 2011, 01:23:30 PM »

Quote from: 754 on May 19, 2011, 08:06:46 AM

That is one bike in dire need of a custom frame..!1

Q re Comstars?
Did the bolDOr Honda use the regular Comstars, or the other type with 3 double spokes with holes drilled/punched in them?

The Bol D'or used the 3 piece "boomerang" comstar with the holes that you referred to.

Tintop · « **Reply #7042 on:** May 19, 2011, 02:54:31 PM »

The rims I was referring to were from an RCB RS1000. From the old link which seems to work. Alloy rims, magnesium hubs.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&_trksid=p4340.l2557&rt=nc&nma=true&item=350452512190&si=q1K7%252FMef9GbhZAGPimupp08CI20%253D&viewitem=&sspagename=STRK%3AMEWAX%3AIT

motocyconomad · « **Reply #7043 on:** May 20, 2011, 11:47:33 AM »

Ecosse · « **Reply #7044 on:** May 20, 2011, 08:49:35 PM »

http://www.bikeexif.com/honda-xl600

nice. not quite a street tracker but i'll take it.

Ecosse · « **Reply #7045 on:** May 20, 2011, 09:07:58 PM »

Ecosse · « **Reply #7046 on:** May 20, 2011, 09:13:42 PM »

wannabridin · « **Reply #7047 on:** May 22, 2011, 10:15:01 AM »

Quote from: Ecosse on May 20, 2011, 08:49:35 PM

http://www.bikeexif.com/honda-xl600

nice. not quite a street tracker but i'll take it.

VERY cool!! it's like a street tracker motard? a street motard? either way, very cool!

B.O.X.N.I.F.E. · « **Reply #7048 on:** May 22, 2011, 11:26:24 PM »

strynboen · « **Reply #7049 on:** May 22, 2011, 11:53:34 PM »

why are he smiling..just done that badddd thing

News:

Author Topic: "INSPIRATION GALLERY " (Read 2259804 times)