Author Topic: "INSPIRATION GALLERY " (Read 2252560 times)

547 · « **Reply #1000 on:** March 03, 2009, 05:28:54 PM »

Quote from: Alan F. on March 03, 2009, 04:52:33 PM

I've been tinkering in the back of my mind for a long time on a full size, small bore cafe bike.... anyone have any more that fit this category? Bobbers too please.

what size and model is this

Alan F. · « **Reply #1001 on:** March 03, 2009, 05:39:18 PM »

I dunno about the frame, could be custom. The engine looks quite a bit like the old honda ohv engines.

like this: http://cgi.ebay.com/ebaymotors/Parts-Accessories_Motorcycle-Parts-Accessories__1985-HONDA-Z50-Z50R-Z-50-RUNNING-MOTOR-ENGINE_W0QQitemZ360134544594QQddnZPartsQ20Q26Q20AccessoriesQQadiZ2863QQddiZ2811QQadnZMotorcycleQ20PartsQ20Q26Q20AccessoriesQQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item360134544594&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318

Ecosse · « **Reply #1002 on:** March 03, 2009, 05:44:01 PM »

OK, a clear Italian theme; I'm not sure if I'm treading into moped territory but they're cool I think.

Ecosse · « **Reply #1003 on:** March 03, 2009, 05:50:12 PM »

Ecosse · « **Reply #1004 on:** March 03, 2009, 05:51:19 PM »

Mama mia! Last one.

Alan F. · « **Reply #1005 on:** March 03, 2009, 05:57:33 PM »

this 140cc motor puts out a whopping 11hp at 9500rpm

http://cgi.ebay.com/ebaymotors/Parts-Accessories_Motorcycle-Parts-Accessories__LIFAN-140CC-OIL-COOLED-ENGINE-MOTOR-XR-CRF-50-125-138CC_W0QQitemZ360106916347QQddnZPartsQ20Q26Q20AccessoriesQQadiZ2863QQddiZ2811QQadnZMotorcycleQ20PartsQ20Q26Q20AccessoriesQQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item360106916347&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318

VonYinzer · « **Reply #1006 on:** March 03, 2009, 05:58:11 PM »

VonYinzer · « **Reply #1007 on:** March 03, 2009, 05:58:55 PM »

Ecosse · « **Reply #1008 on:** March 03, 2009, 06:06:17 PM »

Always liked these two.

547 · « **Reply #1009 on:** March 03, 2009, 06:34:13 PM »

billybobobrain · « **Reply #1010 on:** March 03, 2009, 06:43:42 PM »

Quote from: Alan F. on March 03, 2009, 05:57:33 PM

this 140cc motor puts out a whopping 11hp at 9500rpm

http://cgi.ebay.com/ebaymotors/Parts-Accessories_Motorcycle-Parts-Accessories__LIFAN-140CC-OIL-COOLED-ENGINE-MOTOR-XR-CRF-50-125-138CC_W0QQitemZ360106916347QQddnZPartsQ20Q26Q20AccessoriesQQadiZ2863QQddiZ2811QQadnZMotorcycleQ20PartsQ20Q26Q20AccessoriesQQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item360106916347&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318

Wow I think I will run home and ask mom if I can have one right now!!!

I think is is for a pocket bike and I know that you can get at least 20hp out of some of the nicer motors.

Alan F. · « **Reply #1011 on:** March 03, 2009, 08:14:23 PM »

Quote

I think is is for a pocket bike

This Motor should fit the following models:
Note: This is not a guarantee, if you are unsure, please check with your local dealer.
HONDA CRF50 / CRF70 / XR50 / XR70 / Z50 / Z50R / CT70 Mini Trail / Z50 / Minitrail Monkey / XL70 ST70 / QA50 / QR50 / CL70 / SL70 / 70 Passport / ST 90K2 / ST 90K1 / CS 90 / SL 90 / ZB 50 /

As if any local dealer in the USA will have anything else to say except that the federal government doesn't let them sell those bikes anymore...but they've got a warehouse full of them.

Aren't most pocket bikes 2 stroke? this is a four stroke, four speed.

Ecosse · « **Reply #1012 on:** March 03, 2009, 09:18:46 PM »

Like that green and white Jawa!

Can anyone ID the engine on this cool home build?

Alan F. · « **Reply #1013 on:** March 03, 2009, 09:30:37 PM »

is it an 83 vt500?

http://cgi.ebay.com/ebaymotors/Honda-VT500-Shadow-500-83-Engine-Motor-076574_W0QQitemZ290280188587QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item290280188587&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318

billybobobrain · « **Reply #1014 on:** March 03, 2009, 09:43:52 PM »

Quote from: Alan F. on March 03, 2009, 08:14:23 PM

Quote
I think is is for a pocket bike

This Motor should fit the following models:
Note: This is not a guarantee, if you are unsure, please check with your local dealer.
HONDA CRF50 / CRF70 / XR50 / XR70 / Z50 / Z50R / CT70 Mini Trail / Z50 / Minitrail Monkey / XL70 ST70 / QA50 / QR50 / CL70 / SL70 / 70 Passport / ST 90K2 / ST 90K1 / CS 90 / SL 90 / ZB 50 /

As if any local dealer in the USA will have anything else to say except that the federal government doesn't let them sell those bikes anymore...but they've got a warehouse full of them.

Aren't most pocket bikes 2 stroke? this is a four stroke, four speed.

All the ones I had were, but they have evolved into a 4 stroke thumper type 125cc POS. at least in the main streem. I think you can still get a single speed ducati type italian job that will do 90 those are still 2 stroke.

Ecosse · « **Reply #1015 on:** March 03, 2009, 09:47:40 PM »

Oh, oh... look what I found!

http://www.aermacchi-racing.com/

Ecosse · « **Reply #1016 on:** March 03, 2009, 09:51:38 PM »

Quote from: Alan F. on March 03, 2009, 09:30:37 PM

is it an 83 vt500?

I zoomed my image and the engines look pretty close. Maybe a later version?

benly- ben · « **Reply #1017 on:** March 04, 2009, 02:06:42 AM »

Quote from: Alan F. on March 03, 2009, 05:57:33 PM

this 140cc motor puts out a whopping 11hp at 9500rpm

http://cgi.ebay.com/ebaymotors/Parts-Accessories_Motorcycle-Parts-Accessories__LIFAN-140CC-OIL-COOLED-ENGINE-MOTOR-XR-CRF-50-125-138CC_W0QQitemZ360106916347QQddnZPartsQ20Q26Q20AccessoriesQQadiZ2863QQddiZ2811QQadnZMotorcycleQ20PartsQ20Q26Q20AccessoriesQQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item360106916347&_trksid=p4506.c0.m245&_trkparms=72%3A1171%7C65%3A12%7C39%3A1%7C240%3A1318

my benly puts out 15hp at 10000rpm

Alan F. · « **Reply #1018 on:** March 04, 2009, 06:05:42 AM »

That's pretty good Ben, is that stock? I wonder what it'll make when you're done tuning and modding? Honda has the CBR125 (not in the US yet...if ever) it's a water cooled, catalysed exhaust, fuel injected single, with a six speed that makes....as I've read.....22hp. not too shabby for a 125 with plenty of aftermarket support.
We just don't see or hear about most of the really good bikes here in the US, so you're one up on many of us already.

Industrial Rat400f Killer · « **Reply #1019 on:** March 04, 2009, 08:26:12 AM »

Quote from: Ecosse on March 03, 2009, 09:47:40 PM

Oh, oh... look what I found!

http://www.aermacchi-racing.com/

I sent those guys and email and this is part of what I got.

"All kitis are still available , only for the Drixton we make a new design at the moment
It will be ready in 07-08 this year"

I'm very tempted to ask how much they are. They don't come with a title though so some create paper work would be in order to ride them on the street.

HavocTurbo · « **Reply #1020 on:** March 04, 2009, 08:28:55 AM »

Quote from: Rat400F on March 04, 2009, 08:26:12 AM

Quote from: Ecosse on March 03, 2009, 09:47:40 PM
Oh, oh... look what I found!

http://www.aermacchi-racing.com/

I sent those guys and email and this is part of what I got.

"All kitis are still available , only for the Drixton we make a new design at the moment
It will be ready in 07-08 this year"

I'm very tempted to ask how much they are. They don't come with a title though so some create paper work would be in order to ride them on the street.

Maybe you could request that they use a neck that you provide?? We used to do that.

Industrial Rat400f Killer · « **Reply #1021 on:** March 04, 2009, 08:30:36 AM »

Quote from: HavocTurbo on March 04, 2009, 08:28:55 AM

Quote from: Rat400F on March 04, 2009, 08:26:12 AM
Quote from: Ecosse on March 03, 2009, 09:47:40 PM
Oh, oh... look what I found!

http://www.aermacchi-racing.com/

I sent those guys and email and this is part of what I got.

"All kitis are still available , only for the Drixton we make a new design at the moment
It will be ready in 07-08 this year"

I'm very tempted to ask how much they are. They don't come with a title though so some create paper work would be in order to ride them on the street.

Maybe you could request that they use a neck that you provide?? We used to do that.

You mean a neck that has a titled VIN # ?

HavocTurbo · « **Reply #1022 on:** March 04, 2009, 08:32:23 AM »

Yea, just cut it off a donor frame and ship it to them.

Maybe clean it up first on a lathe. We used to do that all the time.

Industrial Rat400f Killer · « **Reply #1023 on:** March 04, 2009, 08:32:55 AM »

Excellent idea

Alan F. · « **Reply #1024 on:** March 04, 2009, 05:56:34 PM »

It's still being done around here...

News:

Author Topic: "INSPIRATION GALLERY " (Read 2252560 times)

billybobobrain

billybobobrain