Hey everyone, I just aquired a 77 cb750 SS from a buddy that had torn it apart and had planned on rebuilding it but didn't have the time. When I got it, the engine was already taken apart so all I had to do was replace worn parts and put it all back together.
When I was looking at it I noticed that a couple of the studs were rusted and looking in bad shape. After reading the advice here, I decided to remove the old ones and order some HD's. Well, most of them came out with a little coaxing except 2. I have been putting penetrating oil on it for the past couple of days and using heat to try to get it out. I used 2 wrenches on them to get them "popped" out and turned them the rest of the way out. These 2 just would not come out, so today I was doing the same as the others, when the stud sheared off at the base. Now there is not enough to grab on to and I do not know how to get it out.
Any help would be GREATLY appreciated.
Thanks!
