Author Topic: Paint Job Progress  (Read 5536 times)

0 Members and 2 Guests are viewing this topic.

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Paint Job Progress
« on: December 03, 2010, 07:00:30 PM »
So I thought I would post some pics of my progress on my 1976 CB550K. I've been apinting the tank and sidecovers and so far it's starting to look pretty good if I say so myself. I'm hoping to have this bike looking good for spring.
First it was stripping the tank. The black area didn't want to come off with stripper but lot's of sanding did the trick. Next the bondo to fill a dent and a few dings. Etching primer, then filler primer sanded smooth. Spray adhesion for the plastic covers as primer. Next for color I went to NAPA and found premixed ready to paint laquer from Duplicolor and a Preval. I have to say next time I think I would just use spray can for the same results but cheaper. 3 preval units and a quart of paint cost $40 rattle can would cost $25. Live and learn. I bought a 750 striping kit from a member I had to trim it a bit but it turned out looking like original decals. And that's where I am at this point. Next up will be Spraymax2000 clearcoat. Here are some pics.
« Last Edit: December 09, 2010, 03:18:48 PM by Duanob »
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,259
  • Central Texas
Re: Paint Job Progress
« Reply #1 on: December 03, 2010, 07:03:51 PM »
nice, don't see white that often.

I need to start on my tank...
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #2 on: December 03, 2010, 07:06:21 PM »
Yeah I like white. I wasn't sure if I should paint the black insert but I left it white for now.
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline HalfFastMoto

  • Full Member
  • *
  • Posts: 68
Re: Paint Job Progress
« Reply #3 on: December 03, 2010, 07:10:38 PM »
Nice color choices - turned out nice!
-brad

Better HalfFast than HalfA$$ed
The appropriate number of bikes is "1" more!

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,259
  • Central Texas
Re: Paint Job Progress
« Reply #4 on: December 03, 2010, 07:21:14 PM »
Yeah I like white. I wasn't sure if I should paint the black insert but I left it white for now.


black insert?
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Greggo

  • Somebody's
  • Old Timer
  • ******
  • Posts: 4,164
  • Helmets Save Lives. Period.
Re: Paint Job Progress
« Reply #5 on: December 03, 2010, 07:33:24 PM »
Yeah I like white. I wasn't sure if I should paint the black insert but I left it white for now.


black insert?

I think he means the section surrounding the emblem.  It's left white in the later pictures, whereas it was black originally there.

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #6 on: December 03, 2010, 07:46:17 PM »
Yeah I like white. I wasn't sure if I should paint the black insert but I left it white for now.


black insert?
Inside the decal is black for the OEM paint scheme.
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #7 on: December 05, 2010, 01:36:56 PM »
ARRGGHHH!!! FRUSTRATION!!!

Friggin dust! I can't get rid of it. I'm working in a small 5' x 8' visqueen room, I've taken precaution to keep it clean. I'm using lint free rags but everytime I tack wash it with alcohol or acetone dust always finds it's way to my paint job. This morning I was ready to clearcoat and after fighting dust I looked the tank over good and no dust. I spray a coat of clear on and it looks like I rolled the tank on a dusty carpet. I couldn't believe it. I don't even know where this dust is coming from. This is the biggest reason I will take the tank out to have painted professionally. I've been fighting dust at every step of the paint process. I'm pulling my hair out at this point. I guess I'll be sanding it agian once this coat dries.

Just venting.  :P
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline Goofaroo

  • general nuisance
  • Hot Shot
  • ***
  • Posts: 460
Re: Paint Job Progress
« Reply #8 on: December 05, 2010, 01:44:09 PM »
I'm no painter but a friend of mine is and he builds the visqueen room and then right before he sprays the paint he takes a hose in there with a nozzle on it and mists the walls and the floor with water. With the surrounding area damp he can paint without stirring up dust. Just a thought. The real painters may have a better idea.

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #9 on: December 05, 2010, 02:52:39 PM »
Thanks I wished I would've done that.
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline joeyputt

  • Hot Shot
  • ***
  • Posts: 266
  • The green flag sets me free
    • www.dwmsracing.com
Re: Paint Job Progress
« Reply #10 on: December 05, 2010, 04:09:34 PM »
Your parts look great! If you get a little dust in it you can 1500 sand the clear and buff it with 3M and it will look like glass! You may already know this but I just thought I would offer in case you did not. Seriously though I love the white! Keep up the good work!
Joe - Owner/Operator of DWMS Racing World Class Engine & Motorcycle Building www.dwmsracing.com

Facebook https://www.facebook.com/joe.dwmsracing

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #11 on: December 06, 2010, 05:22:15 PM »
Thanks for the words of encouragement and the comliments joey. I did a little spot sanding and respraying clear coat. I think I got it. Next up will be the fine sanding and polishing. What 3m product do you use? I've heard the anti-swirling polishing compound works good.
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline joeyputt

  • Hot Shot
  • ***
  • Posts: 266
  • The green flag sets me free
    • www.dwmsracing.com
Re: Paint Job Progress
« Reply #12 on: December 06, 2010, 06:00:06 PM »
Yes the swirl polish works well, do you have an automotive paint supply or body shop supply close to you? They normally stock various 3m compounds and could probably tell you better than I could the best one to use with your brand of clear, I have used the general compound and the swirl they definately both worked great! My brother is actually a better automotive painter than I am (I do more of the engine paint) let me ask him what he recommends.
« Last Edit: December 06, 2010, 06:06:45 PM by joeyputt »
Joe - Owner/Operator of DWMS Racing World Class Engine & Motorcycle Building www.dwmsracing.com

Facebook https://www.facebook.com/joe.dwmsracing

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #13 on: December 07, 2010, 03:31:48 PM »
Cool. My clearcoat is Spraymax 2000 2 part. It is surprisingly easy to work with inspite of the freakin dust. I'll have some more pics up soon with the tank and covers on the bike.
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Paint Job Progress
« Reply #14 on: December 07, 2010, 05:44:00 PM »
looks real good, I am digging the white.  The spraymax2000 is great clear, I use it on all my garage paint jobs.  Maybe someday I will see this one in person?

Offline tango911

  • Expert
  • ****
  • Posts: 1,012
Re: Paint Job Progress
« Reply #15 on: December 07, 2010, 06:17:13 PM »
is the spraymax good for protection from gas?

CURRENT STABLE:
1969 Honda Dream 305 (black)
1974 Mach III kawi 500 smoker
K2 (project)
K2 Original fixer up
K0 original fixer up
2006 CRF250R

Offline Alan F.

  • We remember the Night Rider, and we know who you are.
  • Really Old Timer ...
  • *******
  • Posts: 7,343
Re: Paint Job Progress
« Reply #16 on: December 08, 2010, 10:22:49 AM »
is the spraymax good for protection from gas?



Yes it is.

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #17 on: December 08, 2010, 12:44:10 PM »
looks real good, I am digging the white.  The spraymax2000 is great clear, I use it on all my garage paint jobs.  Maybe someday I will see this one in person?

I will be trying to make Vashon Isle Ride next summer and hopefully meet a bunch of PNWSOHC4ers.
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Paint Job Progress
« Reply #18 on: December 08, 2010, 05:56:18 PM »
Count on it!

looks real good, I am digging the white.  The spraymax2000 is great clear, I use it on all my garage paint jobs.  Maybe someday I will see this one in person?

I will be trying to make Vashon Isle Ride next summer and hopefully meet a bunch of PNWSOHC4ers.

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Paint Job Progress
« Reply #19 on: December 10, 2010, 11:06:41 AM »
hey tweakin you ever do the backfire Moto night in Seattle?

http://backfiremoto.com/
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline thehammer

  • Enthusiast
  • **
  • Posts: 109
Re: Paint Job Progress
« Reply #20 on: December 10, 2010, 12:56:35 PM »
a window fan with a filter helps cut down on the dust. Dirt nibs are to be expected when painting in yer garage though. if you or someone you know has a high speed buffer you can still make it look like glass as long as you put on enough clear. runs can be carefully shaved down with a single edge razorblade ( tape the corners ) , then wetsanded a little bit with 1500 grit (use a block on runs and other large imperfections). dirt nibs will sand out with 2000 grit. orange peel should be blocked down with 2000 grit. finish everything with 3000 grit and you'll barely have to buff it to a beautiful shine. remember to keep your paper very clean as well as the paint surface, continuously spraying both with water. Dry the paint surface often to make sure you are sanding out the larger grit scratched rather than gouging debris into the fresh paint, making it look worse. white looks good buffed out with just rubbing compound, black takes 3 consistencies of compound to look good in the sun with no streaks.

In body shops, with high dollar downdraft paint booths, they still get dirt nibs in the paint.

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: Paint Job Progress
« Reply #21 on: December 10, 2010, 05:51:07 PM »
I planned on each time it came around but never made it this past year due to my work schedule.  Next year for sure.

hey tweakin you ever do the backfire Moto night in Seattle?

http://backfiremoto.com/

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Paint Job Progress
« Reply #22 on: December 10, 2010, 06:11:01 PM »
is the spraymax good for protection from gas?



Most 2 pac products are fine with fuel. We use a lot of 2 pac products at work and they are pretty tough. You can also get some really good industrial clears that have strong UV resisters in them, most are marine grade and very tough....

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Raef

  • Expert
  • ****
  • Posts: 1,317
Re: Paint Job Progress
« Reply #23 on: December 10, 2010, 06:28:48 PM »
We use rubber seal clears, primer/sealers and mostly R&M color they are a polyester based urethane, have a good UV rating, rubber seal is made in Dayton Ohio

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Paint Job Progress
« Reply #24 on: December 10, 2010, 06:39:33 PM »
We use rubber seal clears, primer/sealers and mostly R&M color they are a polyester based urethane, have a good UV rating, rubber seal is made in Dayton Ohio

Yep, we use Poly U's as well, was using it yesterday and this morning.....Good stuff..

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.