Topic: Need CB350f Needle Jet Emulsion Tube

[alocker]

Anyone know where to get one. I thought for sure Sudco would have them but I cannot find them.  Please help, #1 carb did not have one

[faux fiddy]

There are a couple carb bodies in the parts for sale section. Asking $10 a piece. You could make sure they have the emulsion tube before buying.

http://forums.sohc4.net/index.php?topic=82308.0

Prolly your best chance of finding one anywhere aside buying a whole rack on e-bay.

[Ernest T]

David silver has them for $30 a set.

DAVID SILVER

[alocker]

Thanks tree, I missed it.  The search engine is picky.

Ernest, he has them for the 400f, not 350f, its a different part number, I assume its slightly bigger or different profile than the 350.  Thanks though.

[faux fiddy]

Thanks tree, I missed it.  The search engine is picky.

Ernest, he has them for the 400f, not 350f, its a different part number, I assume its slightly bigger or different profile than the 350.  Thanks though.

I had heard that the only difference in the 350/400 carbs was a slightly larger idle jet.

You could probably do alright with the 400f emulsion tube , especially if you got a whole set.  I don't think there is a difference, and if there was it would be about 10%.

There is a thread about people modifying emulsion tubes with doubling up the  holes ,BTW, and it gets them a bit better gas mileage. Might be on a different website.

[Ernest T]

Thanks tree, I missed it.  The search engine is picky.

Ernest, he has them for the 400f, not 350f, its a different part number, I assume its slightly bigger or different profile than the 350.  Thanks though.

I thought they were the same because the clymer book has the carbs labeled 350/400. 

[alocker]

They might be the same, but the PN is different.  The 400f is appears to still be available through dealers.  Problem is I don't really want to buy a whole set.  I will make a few phone calls tomorrow to see what my options are. 

[-CB-Jamie-]

Have you tried steve on 400fourbits, hes really good to deal with, he has a few sets of 400f carbs he split but I don't know if he still has emulsin tubes.

http://www.400fourbits.co.uk/#misc

[alocker]

I have confirmed the 400f jet set will not work unless I swap all of them.  I made a bunch of calls and got nowhere.  Contacted everyone in the classifieds too, got nothing.  Any other suggestions would be great. 

[faux fiddy]

This seller seems to be maximizing profit, but if you contact him he might part with one if he has it.  Other than that there is a full rack for $75.

http://cgi.ebay.com/ebaymotors/72-cb350f-cb350-four-right-inner-carb-carburetor-honda-/220709463988?pt=Motorcycles_Parts_Accessories&hash=item33634f27b4

[fmctm1sw]

In my experience working with 350F/400F carb racks I have seen differing emulsion tubes.  Whether or not they would function any differently though, I don't know.  I had pictures somewhere of those different tubes...

*edit* yeah, here:  http://forums.sohc4.net/index.php?topic=55777.0