Topic: engine bore cost

[thelowmax]

Where can I get my in engine bored in or near Boston? Some things I just can't do myself just yet. How about what an average engine bore should cost?

[kos]

Most shops charge 40 per hole for going 1 or two sizes larger. When going to 836 on a 750 prices goes to 50 per hole. And that would included boring, precision honing to desired wall  finish and proper piston/cylinder bore clearance.

That's what I charge here at M3 Racing

KOS

[thelowmax]

That's very helpful. I'm doing my first complete top to bottom overhaul and have always wanted to upgrade. I'll be back with many, many questions. Thanks.

[MRieck]

That's very helpful. I'm doing my first complete top to bottom overhaul and have always wanted to upgrade. I'll be back with many, many questions. Thanks.

Harry's Machined Parts in Northborough MA 508 366 1455 or I can take them there for you a get a little discount. I live in Ashland which is closer to Boston.
 Mike

[Bill/BentON Racing]

Go see Mike Rieck,you be glad you did! Ask him about porting your head(where the real power is)!Good Luck,Bill

[Big Jay]

http://www.aperaceparts.com/machining.html

[MRieck]

http://www.aperaceparts.com/machining.html

Jay knows Rick.

[Jerry Rxman Griffin aka MuthaF'er]

Brown's Machine Shop  - UPS does mine (they take my stuff to big Jay at APE  or to Mike Rieck)

[Old Scrambler]

All good sources and participants on this page.........compared to Millenium Technologies (.com) in Plymouth, WI at $50 per hole but not honed.

[thelowmax]

Thanks for the info. I just bought yet another engine that I'm stripping down and depending on it's condition inside, i may or may not bore it out.

For some reason, I get more pleasure out of taking them apart than I do putting them back together.