Author Topic: 18 $ paint job (Read 29960 times)

78whiteorbs · « **Reply #50 on:** December 29, 2011, 06:58:29 PM »

At 66 they know me by name

Very helpful people.

here is a picture the proprietary spray can design .

I have shot over enamel Primer/self etching primer and it worked like a charm. On there website it states that it bonds very well with enamel/lacquer . One thing to note though is the weakest link in the chain will be the enamel .Think of it like laying hardwood oak flooring over bamboo. If at all possible I try to use existing paint as a base to shoot over. This gives a more durable end result .

Wow! No kidding? Well, that is quite something then. In that case I can't think of a reason on the face of this earth that if anyone was going to do a rattle-can job on their bike that they'd use anything else.

totally agree!

@ stinkfinger - It's this easy = find a car you like the paint color of , a modern car works best. Call the business that suits you that is set up to charge the spraymax paint system cans( I like the website I have posted feel free to shop anywhere you like though )do yourself a favor and call them . If it's busy then call back . I have never had a problem getting through , usually order around 3pm . They even have requested photos for there new website from me and are very help and friendly . Ask a bunch of stupid questions and they are very patient to explain in a friendly way(be polite and friendly as well .People often complain of not getting helpful friendly service but waltz in a place or phone a business up with no manners or common decency whatsoever).
Its pretyt straight forward and easy-least that was my experience

best wishes in your painting endeavors-

stinkfinger · « **Reply #51 on:** December 29, 2011, 11:19:17 PM »

Thanx, I'll give em a call.

Tony

chase2034 · « **Reply #52 on:** January 05, 2012, 03:11:16 PM »

just talked to gary from R & E Automotive Paint and Supply. very nice guy. spent 20 minutes talking to me. i already placed an order for the spray max apoxy primer, urethane primer and adhesion promoter for my side covers. came out to about 67 bucks. lastly i just have to decide what color i am going to go with which will cost about 23 bucks. i recommend this guy, hes super helpful.

http://www.repaintsupply.com/contact_us.cfm

Vreihenmotor6 · « **Reply #53 on:** January 05, 2012, 07:07:47 PM »

I had a similar experience with him today as well, I got some primer, a can of rallye gelb VW paint, and some satin black for trim parts

can't wait to get it

78whiteorbs · « **Reply #54 on:** January 06, 2012, 06:33:04 AM »

Good to hear such positive reports from different sources. It's always good to have more than one in my book.

Vreihenmotor6 · « **Reply #55 on:** January 12, 2012, 05:14:57 PM »

I've got a 76 750F that I'm going to repaint with spraymaxx, does anyone know what to do about the belt line trim on the seat? the factory finish looks like its a piece of tape applied

has anyone painted this?

78whiteorbs · « **Reply #56 on:** January 12, 2012, 07:53:29 PM »

^Post a photo of what you are describing-

Got an RD350 bike I am restoring and paint came today -

...Portuguese Orange! Direct PPG match for a Boeing 747 jet when they photo indexed it of an original tank at a local paint shop here in town.
The kind folks at 66autocolor included this spraymax trigger sprayer attachment free- I like free!
I have used some very crappy versions of these just as a test to see how bad they suck/dont suck with enamel cans back in the day and I can say this one is built very well. It has the Spraymax name on the handle . Past experiences have lead to nasty drips from paint mist building at the top of the rig but this one looks very well engineered . Might give it a a go . Here are some pix-

here is the last one I shot (also a 75 Portuguese RD350- the original is on the right for reference. I did the vinyl as well.

Vreihenmotor6 · « **Reply #57 on:** January 12, 2012, 07:58:28 PM »

Quote from: 78whiteorbs on January 12, 2012, 07:53:29 PM

^Post a photo of what you are describing-

not my bike, nor my picture, but see that line under the seat, its an alloy trim peice that has a pin strip of the bike color on it

I also meant to buy that spray handle, let me know how it works

78whiteorbs · « **Reply #58 on:** January 12, 2012, 08:01:52 PM »

that's just pin stripping - can be had from a bazillion online stores or visit your local sign shop and prolly get enough of what you need free!

Vreihenmotor6 · « **Reply #59 on:** January 12, 2012, 08:03:52 PM »

Quote from: 78whiteorbs on January 12, 2012, 08:01:52 PM

that's just pin stripping - can be had from a bazillion online stores or visit your local sign shop and prolly get enough of what you need free!

you think I can get a good color match?

I'm just afraid as I will only have a short period of time in which to use the spraymax and I'll be bummed if I have to order a new can to spray just that

78whiteorbs · « **Reply #60 on:** January 12, 2012, 08:06:42 PM »

not sure if I am following you here- Paint the entire pan- then apply pin stripping as desired- If you like later you can always clear over but many many automobile manufacturers of even high end vehicles do not even clear over vinyl graphics.

Vreihenmotor6 · « **Reply #61 on:** January 12, 2012, 08:16:03 PM »

I'm probably not describing this right, but on the 750F, there is a peice of alloy trim that snaps onto the side of the seat, and the rear cowl, its about 1/2" high, and the center 1/4" is colored to match the bike

I've found this: http://www.customvinylgraphics.com/images/1-4Solid.pdf

in which lemon yellow looks close, but I'm not 100% sure it will match the vw rallye gelb paint that I bought as a match for the factory Sulfur yellow that I'm trying to emulate

sorry, I'm not trying to hijack the thread, I'm just new at this particular part of restorations

78whiteorbs · « **Reply #62 on:** January 12, 2012, 08:34:18 PM »

hmmm, can you not just unsnap it then ,mask and paint? Really I think I'd have to see a photo.

MoMo · « **Reply #63 on:** January 13, 2012, 03:48:44 AM »

Good job on the RD

I always liked that line of Yamahas-from the 125 on up to the 400, nothing like the smell of 2stroke in the morning...Larry

Duanob · « **Reply #64 on:** January 13, 2012, 09:30:31 AM »

Funny but I've never seen a Boeing 747 in orange. Considering they are made just down the street from me and I see many of them on a daily basis for the past 40 years.

stinkfinger · « **Reply #65 on:** January 13, 2012, 04:36:42 PM »

Just did the spraymax y2k on this dirtbike frame.
"Harley Impact Blue"

Tony

Syscrush · « **Reply #66 on:** January 13, 2012, 05:06:27 PM »

I love that this forum has a thread for rattle can paintjobs.

78whiteorbs · « **Reply #67 on:** January 13, 2012, 06:25:42 PM »

Quote from: Duanob on January 13, 2012, 09:30:31 AM

Funny but I've never seen a Boeing 747 in orange. Considering they are made just down the street from me and I see many of them on a daily basis for the past 40 years.

google Boeing Orange my friend-

and thanks Larry I love to smoke/stink it up,it's great! When I do a few laps around the block I can drive back through the smoke I just left behind

though I love my Honda's dont get me wrong, this bike would figuratively and literally "smoke " a CB750 any day of the week,it's scary fast and sounds like a maniac with a chainsaw! No where near a civil as a Honda CB ...

78whiteorbs · « **Reply #68 on:** January 13, 2012, 06:56:20 PM »

also, that frame looks Great Tony!

hondamatteo · « **Reply #69 on:** January 15, 2012, 05:57:48 PM »

Do you think 1 can would be sufficient enough to paint a tank and 2 side covers from a grey primer to a charcoal grey? Using the paint code from a porsche. Metallic Titan Grey

78whiteorbs · « **Reply #70 on:** January 15, 2012, 10:01:20 PM »

stinkfinger · « **Reply #71 on:** January 18, 2012, 02:46:20 AM »

Quote from: hondamatteo on January 15, 2012, 05:57:48 PM

Do you think 1 can would be sufficient enough to paint a tank and 2 side covers from a grey primer to a charcoal grey? Using the paint code from a porsche. Metallic Titan Grey

It took 2 cans for my frame but, the cans have a pretty wide spray
pattern and i ended up wasting a lot of paint trying to get around
everything. I think 1 can will do your job but as the shipping is 50%
as much as the paint, I'd spend the extra $22 for an extra(just in case) can.
Just my .02

Tony

bert96 · « **Reply #72 on:** January 18, 2012, 11:42:01 AM »

Quote from: flybox1 on December 29, 2011, 11:15:05 AM

$17.40 a can

http://www.repaintsupply.com/pd_2_part_2k_aerosol.cfm

....and naturally they don't ship to Canada

Bert

hondamatteo · « **Reply #73 on:** January 18, 2012, 01:24:11 PM »

Quote from: stinkfinger on January 18, 2012, 02:46:20 AM

Quote from: hondamatteo on January 15, 2012, 05:57:48 PM
Do you think 1 can would be sufficient enough to paint a tank and 2 side covers from a grey primer to a charcoal grey? Using the paint code from a porsche. Metallic Titan Grey

It took 2 cans for my frame but, the cans have a pretty wide spray
pattern and i ended up wasting a lot of paint trying to get around
everything. I think 1 can will do your job but as the shipping is 50%
as much as the paint, I'd spend the extra $22 for an extra(just in case) can.
Just my .02

Tony

Ya I think I will get 2 cans just in case. As for shipping to Canada bert96 I will have mine shipped to a place at the boarder and then just go pick it up from there. Will cost me an extra 5 bucks but should be worth it. Im only a 30min drive from the boarder. I have used spraymaxx clear before but never with colour in it, what should prep look like? I will have to sand down to bare metal is some spots to get rid of some surface rust and then have 1 or 2 small dents I will have to fill. How smooth should the primer coat be before applying the colour/clear. Maybe 1000 grit? I was thinking to leave a little bit of texture for the colour coat to grip too.

78whiteorbs · « **Reply #74 on:** January 18, 2012, 02:31:09 PM »

400-600 tops you needs something for the paint to bond.

News:

Author Topic: 18 $ paint job (Read 29960 times)