Author Topic: brandEn's K4 (Read 179734 times)

zoom74cb · « **Reply #150 on:** March 06, 2013, 11:26:54 AM »

My tank happens to be the same color and has the dent on the otherside..but worse. Mine to is like new inside. I am getting help with mine in the form of a stud gun so we can pull the dents out..Really getting the body line back is the hardest part. The tank IS WORTH FIXING. Harbor freight has stud guns for $100 or less if you are a DIY....or find somebody with one. Finding a very good take will cost you...and you dont really know what you are getting sometimes

Blitzburgh207 · « **Reply #151 on:** March 07, 2013, 11:35:21 AM »

been lurking for a while but I don't want to miss anything - subscribed!

brandEn · « **Reply #152 on:** March 07, 2013, 05:27:35 PM »

Top Tree spacer linky for me

THANK YOU MCRider!

MCRider · « **Reply #153 on:** March 07, 2013, 06:06:33 PM »

Quote from: brandEn on March 07, 2013, 05:27:35 PM

Top Tree spacer linky for me
http://forums.sohc4.net/index.php?topic=72765.0

You're welcome.

brandEn · « **Reply #154 on:** March 07, 2013, 06:15:15 PM »

Hey man thanks!
Found that through a forum search. Its a good thing I have Hondamans book or I might have broken my tree. Your link is handy. Good Post.

brandEn · « **Reply #155 on:** March 07, 2013, 06:56:47 PM »

Oil Line Crush Washers

12mm
94109-12000

14mm
94109-14000

brandEn · « **Reply #156 on:** March 07, 2013, 07:11:40 PM »

So I called Race Tech to get a quote on parts for forks.

Forks springs $124.99 (.85 spring rate)
Emulators $169.99
Adapter for emulators $19.99

$314.97

I am thinking about splurging for this setup. I was just going to get progressive springs and some preload adjusters because I have been happy with them on TOA. This gives me something else to tinker with and adjust...

I received my front rim from FFJ and ordered some spokes from Buchanan's . I will wait to order the rear rim and spokes. $278 just for the rim.

brandEn · « **Reply #157 on:** March 09, 2013, 05:49:00 PM »

Got some OEM parts today. Honda switch kit, a new swingarm collar, side cover/oil tank rubber, foot pegs, and top tree nut/washer.

My new seat from Ricky Racer @ Classic Cycle City arrived today. Seat quality and customer service is as good as it gets.

Got my dummy panel jewel's back on

Love that switch kit, it even came with a new lock for the tree

Love this seat!

Stainless hinges made just for these seats

I find it so strange that the pegs are completely offset. Apparently its so the right peg will clear the kicker. The OCD in me wants to cut, grind, and weld to get things symmetrical... alas it will stay like that. No rearsets on this build.

Look at those pegs!

Retro Rocket · « **Reply #158 on:** March 09, 2013, 05:56:59 PM »

I completely understand your OCD mate...

I am trying to work out how to make rear sets using the stock pegs, i think they would look cool....

Looking good, love the seat, might have to get one of those as well...

MCRider · « **Reply #159 on:** March 09, 2013, 06:00:33 PM »

Love those parts! I've got the SS hinges on my Corbin.

There was a thread about the offset pegs, some time ago. Surprising how many people never realized they were offset until it was pointed out to them. Then they didn't like it at all, like you.

Other bikes were that way too, esp BMW, as the cyls were offset.

Try to forget about it.

brandEn · « **Reply #160 on:** March 09, 2013, 06:06:44 PM »

Yea, I will try. I knew they were offset but man it really shows with no engine installed.

Kickstart · « **Reply #161 on:** March 09, 2013, 06:42:22 PM »

Again, very nice!

Where did you get the swing-arm? I assume it's lighter and stronger than stock?

Flying J · « **Reply #162 on:** March 09, 2013, 09:21:01 PM »

Ill tag along.

brandEn · « **Reply #163 on:** March 09, 2013, 09:39:52 PM »

Quote from: Kickstart on March 09, 2013, 06:42:22 PM

Again, very nice!

Where did you get the swing-arm? I assume it's lighter and stronger than stock?

That is a Carpy swing arm I picked up from another member here on the forum. Not sure about the weight difference but some will argue that the performance of one of these swingers is not any better than the stock one. I really can't comment either way. I just like the looks, bronze bushings, and the fact I can install swingarm spools on them.

brandEn · « **Reply #164 on:** March 09, 2013, 09:40:39 PM »

Quote from: ffJMoore on March 09, 2013, 09:21:01 PM

Ill tag along.

glad to have ya ffJ

brandEn · « **Reply #165 on:** March 10, 2013, 03:37:41 AM »

Does anyone have a picture of item #6 they can share? I think it may have gotten misplaced and I'm not really sure what it looks like.

Flying J · « **Reply #166 on:** March 10, 2013, 08:04:45 AM »

I'm not at home so I can't take a picture but if I remember correctly it's ~~not~~ more of a cap then a washer.

Edit: sorry i sent that from my phone. yes its a cap.

MCRider · « **Reply #167 on:** March 10, 2013, 08:11:53 AM »

Quote from: ffJMoore on March 10, 2013, 08:04:45 AM

I'm not at home so I can't take a picture but if I remember correctly it's not of a cap then a washer.

No its a cap, in that the edges are folded down. It enshrouds the felt washer #4 protecting it from the elements. IIRC it was added later, earlier models don't have it, and it can be done without. Though its best to have. You could assemble everything and add it later when you find one.

I'll snap a pic of mine at shop time this afternoon.

Dream750 · « **Reply #168 on:** March 10, 2013, 08:54:49 AM »

Yes, it’s a thin stamped metal cap design with inner “teeth” that engage the splines of the actuating cam to set initial alignment using the red arrow mark.

tweakin · « **Reply #169 on:** March 10, 2013, 09:32:47 AM »

Looking real good B.

Roach Carver · « **Reply #170 on:** March 10, 2013, 09:42:14 AM »

looking great

Ricky_Racer · « **Reply #171 on:** March 10, 2013, 11:22:07 AM »

Your work is outstanding; the bike is coming along exceptionally well, BandEn.

Great looking photos of the seat; we're building a few more with the special pricing for board members. Thanks for your support. I'm really glad you're pleased with our work. Ride well! RR

brandEn · « **Reply #172 on:** March 10, 2013, 05:44:50 PM »

Thanks for the info everyone. So I am 100% sure my bike didn't have one. I would have kept track of something like that and definitely would remember seeing it. Hondaman doesn't even mention it in his book. I have a new felt washer so maybe I will be able to find a cap. Once again the forum comes through!

brandEn · « **Reply #173 on:** March 10, 2013, 05:45:47 PM »

Quote from: Ricky_Racer on March 10, 2013, 11:22:07 AM

Your work is outstanding; the bike is coming along exceptionally well, BandEn.

Great looking photos of the seat; we're building a few more with the special pricing for board members. Thanks for your support. I'm really glad you're pleased with our work. Ride well! RR

Great price on the seat. Especially for what you get. Top notch work. Thanks!

UncleD · « **Reply #174 on:** March 10, 2013, 06:07:16 PM »

Quote from: brandEn on March 10, 2013, 03:37:41 AM

Does anyone have a picture of item #6 they can share? I think it may have gotten misplaced and I'm not really sure what it looks like.

Here it is with #5 beside for size comparison.

News:

Author Topic: brandEn's K4 (Read 179734 times)