« previous next »
Pages: 1 [2]   Go Down

Author Topic: Rear disc convention cb750 k  (Read 14427 times)

0 Members and 2 Guests are viewing this topic.

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Rear disc convention cb750 k
« Reply #25 on: September 08, 2017, 10:49:12 AM »
My race bike has stock drum rear and they is way more leverage than needed. It's still very easy to lock up with a shorter rear set lever.
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Rear disc convention cb750 k
« Reply #26 on: September 08, 2017, 10:49:42 AM »
Quote from: RainCityRider on September 07, 2017, 06:00:29 PM
So I too am putting a rear disc on a cb750 K8 and need a little beta on mounting the master cylinder and reservoir as well as the brake linkage (how I actuate the master cylinder.
IMO, money better spend improving front suspension/braking capability.  The rear un-weights, and can loose traction quickly under hard breaking.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Rear disc convention cb750 k
« Reply #27 on: September 08, 2017, 10:49:48 AM »
Rookster -- nice rear brake rig and comments on leverage.  I've never had any fade issues with my rear, but it seems to be more prone to lock than a disc.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Rear disc convention cb750 k
« Reply #28 on: September 08, 2017, 11:17:00 AM »
Imo   not Worth going to rear disc  , unless  you are also getting much lower Weight .. or its free..
You can find many lightweight setups and wheels to adapt, that should help handling.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,009
  • I refuse...
Re: Rear disc convention cb750 k
« Reply #29 on: September 08, 2017, 12:02:37 PM »
If I'm not mistaken, the OP is getting a new Cognito conversion hub for his bike so there's little chance of persuading him to keep a drum brake. Best to focus on providing answers to his questions than dicker over the merits of his choices.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline RainCityRider

  • BRAAAP!
  • Enthusiast
  • **
  • Posts: 139
  • instagram @raincityrider76
Re: Rear disc convention cb750 k
« Reply #30 on: September 08, 2017, 12:11:08 PM »
Quote from: flybox1 on September 08, 2017, 10:49:42 AM
Quote from: RainCityRider on September 07, 2017, 06:00:29 PM
So I too am putting a rear disc on a cb750 K8 and need a little beta on mounting the master cylinder and reservoir as well as the brake linkage (how I actuate the master cylinder.
IMO, money better spend improving front suspension/braking capability.  The rear un-weights, and can loose traction quickly under hard breaking.
I have a cognito front end already. And I bought the rear wheel, caliper, and master cylinder.
I need help mounting and getting pedal to actuate the master cylinder.
I'm all in just need guidance & pictures of people who have done this.



Sent from my iPhone using Tapatalk
Logged
78 CB750K
78 CB750K
78 CB750K
99 ZRX 1100

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Rear disc convention cb750 k
« Reply #31 on: September 08, 2017, 12:38:38 PM »
By the looks of the bars and tires, it looks like your bike is going for the scrambler/street tracker genre.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline RainCityRider

  • BRAAAP!
  • Enthusiast
  • **
  • Posts: 139
  • instagram @raincityrider76
Re: Rear disc convention cb750 k
« Reply #32 on: September 08, 2017, 01:05:38 PM »
Quote from: SOHC4 Cafe Racer Fan on September 08, 2017, 12:38:38 PM
By the looks of the bars and tires, it looks like your bike is going for the scrambler/street tracker genre.
Sure is!
Logged
78 CB750K
78 CB750K
78 CB750K
99 ZRX 1100

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,800
Re: Rear disc convention cb750 k
« Reply #33 on: September 08, 2017, 11:19:21 PM »
sweet!...awesome breaking power and tires that are a compromise on both dirt and pavement.  Good planning.
Logged
If it works good, it looks good...

Offline CB_Jeff

  • Enthusiast
  • **
  • Posts: 187
Re: Rear disc convention cb750 k
« Reply #34 on: September 09, 2017, 04:23:06 AM »
That Cycle X rear disk conversion kit is slick... albeit a bit pricey.  I wasn't aware that they made that.  I am inclined to reach out to Ken at Cycle X to see if that caliper and bracket would work with a spoke CB750F rear wheel that I have.  I have gathered up the parts for a rear wheel disk conversion - my hang-up has always been how to make the rear master and brake pedal work w/o significant frame mods - switching over the rear wheel and swingarm is pretty straight fwd.
« Last Edit: September 09, 2017, 04:24:40 AM by CB_Jeff »
Logged

Offline RainCityRider

  • BRAAAP!
  • Enthusiast
  • **
  • Posts: 139
  • instagram @raincityrider76
Re: Rear disc convention cb750 k
« Reply #35 on: September 09, 2017, 02:45:59 PM »
Quote from: CB_Jeff on September 09, 2017, 04:23:06 AM
That Cycle X rear disk conversion kit is slick... albeit a bit pricey.  I wasn't aware that they made that.  I am inclined to reach out to Ken at Cycle X to see if that caliper and bracket would work with a spoke CB750F rear wheel that I have.  I have gathered up the parts for a rear wheel disk conversion - my hang-up has always been how to make the rear master and brake pedal work w/o significant frame mods - switching over the rear wheel and swingarm is pretty straight fwd.
Exactly what I'm working on.
Logged
78 CB750K
78 CB750K
78 CB750K
99 ZRX 1100

Offline RainCityRider

  • BRAAAP!
  • Enthusiast
  • **
  • Posts: 139
  • instagram @raincityrider76
Re: Rear disc convention cb750 k
« Reply #36 on: September 09, 2017, 02:47:32 PM »
Quote from: seanbarney41 on September 08, 2017, 11:19:21 PM
sweet!...awesome breaking power and tires that are a compromise on both dirt and pavement.  Good planning.
Thanks for your personal opinion......


Sent from my iPhone using Tapatalk
Logged
78 CB750K
78 CB750K
78 CB750K
99 ZRX 1100

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,781
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: Rear disc convention cb750 k
« Reply #37 on: September 10, 2017, 09:18:24 PM »
Quote from: SOHC4 Cafe Racer Fan on September 08, 2017, 10:49:48 AM
Rookster -- nice rear brake rig and comments on leverage.  I've never had any fade issues with my rear, but it seems to be more prone to lock than a disc.

This can be mitigated by changing the foot rod to a cable instead: the brake is already floating, so the cable preserves the brake pressure during suspension travel. We used to call this the "full floating backing plate" version, as is found on many dirt bikes. Not terribly simple to perform on the bike, but it really does work well. :)
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Rear disc convention cb750 k
« Reply #38 on: September 10, 2017, 09:55:33 PM »
RCR,

Can you post a photo of the opposite side of the rear hub (rotor side)?
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Mantree

  • Hot Shot
  • ***
  • Posts: 596
Re: Rear disc convention cb750 k
« Reply #39 on: August 01, 2021, 09:56:25 AM »
I know this is a old thread but I came across it tooking for ideas on my rear disc conversion. I have chosen to run a harley softail rear hub laced into a 16" rear using a panhead rear brake caliper that ties in where a drumbrake brake stay arm would. I am also running forward controlls so I built my master cylinder into that with a long braded line all the way back and a banjo bolt brake switch. I am waiting on the last of the rear end components fo come in from ebay but I am also pulling my engine to replace my transmition.
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,807
  • Saver of unloved motorcycles.
Re: Rear disc convention cb750 k
« Reply #40 on: August 01, 2021, 12:36:17 PM »
 Remember that a brake stay that is being pushed by the caliper needs to be very sturdy, not the flat steel used on a drum. That's why the disc brake stays are on the bottom so they are in tension not compression.
 The reason it came to mind is someone reported here that he did that and had a brake stay failure on the first hard stop.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Rear disc convention cb750 k
« Reply #41 on: August 01, 2021, 01:07:42 PM »
 Panheads never had a rear brake caliper.l it may have been on a pan.. but no disc brakes in those  days..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline 69cb750

  • Expert
  • ****
  • Posts: 1,217
Re: Rear disc convention cb750 k
« Reply #42 on: August 01, 2021, 01:57:30 PM »
Quote
Panheads never had a rear brake caliper.l it may have been on a pan.. but no disc brakes in those  days..
Panheads never had a front brake caliper either ...
Any caliper on a panhead came from some place else ...
Logged

Offline low-side

  • Enthusiast
  • **
  • Posts: 214
Re: Rear disc convention cb750 k
« Reply #43 on: August 01, 2021, 01:59:59 PM »
For anyone else looking at a disc conversion, I used 75 F swingarm, wheel, and master cylinder.  I used plate steel to mount the master cylinder with engine mount bolts and welded pieces to the back of my brake pedal to hold an adjustable pushrod.  It worked very well and I didn't have to alter the frame.
Logged

Offline Mantree

  • Hot Shot
  • ***
  • Posts: 596
Re: Rear disc convention cb750 k
« Reply #44 on: August 02, 2021, 05:28:06 AM »
Quote from: Don R on August 01, 2021, 12:36:17 PM
Remember that a brake stay that is being pushed by the caliper needs to be very sturdy, not the flat steel used on a drum. That's why the disc brake stays are on the bottom so they are in tension not compression.
 The reason it came to mind is someone reported here that he did that and had a brake stay failure on the first hard stop.
This one hangs extended down under the axle for the brake stay to attach to so that it puls on the stay instead of compressing it.
Logged

Offline Mantree

  • Hot Shot
  • ***
  • Posts: 596
Re: Rear disc convention cb750 k
« Reply #45 on: August 02, 2021, 05:36:37 AM »
Quote from: 69cb750 on August 01, 2021, 01:57:30 PM
Quote
Panheads never had a rear brake caliper.l it may have been on a pan.. but no disc brakes in those  days..
Panheads never had a front brake caliper either ...
Any caliper on a panhead came from some place else ...
You are very right it's from a shovelhead I am not good with harley engine lines because I have never been interested in owning one. The brake I picked is an after market replacment for the banana caliper that supposedly won't rattle so bad and out preform the banana caliper as well.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Rear disc convention cb750 k
« Reply #46 on: August 02, 2021, 01:11:34 PM »
 Lets see the brake Is it a PM or a Jaybrake ?
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Mantree

  • Hot Shot
  • ***
  • Posts: 596
Re: Rear disc convention cb750 k
« Reply #47 on: August 05, 2021, 08:15:14 PM »
It's a wilwood caliper. It arrived today but I am out of state so here is the ebay photo.
« Last Edit: August 05, 2021, 10:29:07 PM by Mantree »
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Rear disc convention cb750 k
« Reply #48 on: August 06, 2021, 12:07:51 AM »
Hmmmmm ...looks like a GMA  brake.. maybe Wilwood make them for GMA..ļ
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,807
  • Saver of unloved motorcycles.
Re: Rear disc convention cb750 k
« Reply #49 on: August 07, 2021, 08:48:54 AM »
Quote from: Mantree on August 02, 2021, 05:28:06 AM
Quote from: Don R on August 01, 2021, 12:36:17 PM
Remember that a brake stay that is being pushed by the caliper needs to be very sturdy, not the flat steel used on a drum. That's why the disc brake stays are on the bottom so they are in tension not compression.
 The reason it came to mind is someone reported here that he did that and had a brake stay failure on the first hard stop.
This one hangs extended down under the axle for the brake stay to attach to so that it pulls on the stay instead of compressing it.
Awesome, you are in fine shape then.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.
Pages: 1 [2]   Go Up
« previous next »