So I had a couple hours of shop time yesterday, first up was to install the new swing arm bushings.
For those who have not done it, dont be intimidated, it is very basic.
It is really just knock the old ones out and pound the new in!
Here are my "special tools" of choice...
Mounted the polished caliper and the hard pipe. Need to order a SS brake line now than I can get an accurate measurement. Going to try Apex since Slingshot is out on break.
Mounted the new oil lines too...
I didnt mount the R rearset yet as I want to use new ss hardware [note nasty nut and bolt in last pic]
Made a long list and will be going to my local specialty hardware store in the next day or two.