« previous next »
Pages: 1 2 3 [4] 5   Go Down

Author Topic: First build: CB750 K3 cafe  (Read 19463 times)

0 Members and 3 Guests are viewing this topic.

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,070
  • I refuse...
Re: First build: CB750 K3 cafe
« Reply #75 on: January 23, 2017, 09:32:59 AM »
Softer for slower speeds, stiffer for higher speeds is their design.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #76 on: January 23, 2017, 09:40:57 AM »
I meant that when it's mounted should it be wobbling when you move it by hand. I think modern sportbikes dampers move a little when in place. So they are not stationary or stiff. There is a little play. Maybe I just remember wrong...
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: First build: CB750 K3 cafe
« Reply #77 on: January 23, 2017, 11:10:01 AM »
For normal street riding, it should not be so tight that it limits range of movement.  However, it should not be flopping about.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,399
  • Central Texas
Re: First build: CB750 K3 cafe
« Reply #78 on: February 12, 2017, 02:27:33 PM »
Quote from: -JP- on January 23, 2017, 09:40:57 AM
I meant that when it's mounted should it be wobbling when you move it by hand.


No.  Mine doesnt....
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #79 on: February 19, 2017, 09:12:57 AM »
I've been looking for a seat for a while. I tried to find good reviews on some but there was not mutch to be found. Of course I could make my own seat, but I don't have the skills or equipment to do so. So the only option for me was to buy one. If only I could find a good one.

Tuffside was a brand that came up and there were some good feedback and the seats looked 10/10. So I contacted them and made an order. There was some special wishes like the passenger strap and they all were included. Chris replied all my messages fast and all in all the customer service couldn't be better.

The seat itself is a quality product. Flawless. Handmade. It is a universal seat so I have to modify the frame to make it fit. That work is still in progress, but I got to fit the seat on it's place and I'm pleased. Wasn't cheap, but worth it. Happy with the color too. I was between dark brown and black.








-JP-
Logged

Offline JoeCooley

  • Long time lurker, but now I'm a
  • Hot Shot
  • ***
  • Posts: 298
Re: First build: CB750 K3 cafe
« Reply #80 on: February 19, 2017, 09:51:26 AM »
Nice project. Tuff side seats are the tits!  8)

I picked up a Taiwanese ebay seat from a local guy. It's for a future projects. The quality isn't bad. I think they go for $50 on ebay.
« Last Edit: April 17, 2018, 02:56:19 PM by Glenn Stauffer »
Logged
Joe in San Diego - Quick Cyles
78 CB750K 836cc Highway Racer - http://forums.sohc4.net/index.php/topic,162264.0.html

Rickman CR750 Restoration (SOLD)

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #81 on: February 21, 2017, 12:04:14 PM »
Today was a welding day. We welded the rear hoop on and some mounting points for the seat. Also a mounting point for the steering damper. I still have to smooth those welds and make holes for the seat mounts. Hope the tire won't hit the frame or the seat when there is load on the bike. Some people have had problems with the clearance.

We also have to think should there be a rear fender or not. How to mount the brake light and maybe relocate the license plate down on the side. So some things still needs to be taken care of but there was good progress today.




-JP-
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: First build: CB750 K3 cafe
« Reply #82 on: February 21, 2017, 12:41:41 PM »
You shouldn't have clearance issues with the hoop, as it is at an upward angle, but you'll want to keep clearance in mind for your taillight/fender.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,070
  • I refuse...
Re: First build: CB750 K3 cafe
« Reply #83 on: February 21, 2017, 12:47:08 PM »
A 17" rear wheel helps too...  ;)
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: First build: CB750 K3 cafe
« Reply #84 on: February 21, 2017, 01:44:34 PM »
Have you chosen to go with a 17" rear?
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #85 on: February 21, 2017, 08:40:58 PM »
I would rather not go with the 17" wheel. Just laced an 18" rim that I found from ebay. I also have brand new k112 on it so I really hope there is enough clearance.
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: First build: CB750 K3 cafe
« Reply #86 on: February 21, 2017, 09:49:33 PM »
Quote from: -JP- on February 21, 2017, 08:40:58 PM
I would rather not go with the 17" wheel. Just laced an 18" rim that I found from ebay. I also have brand new k112 on it so I really hope there is enough clearance.

You should be ok with a 18" wheel as to the hoop.  You may need to watch anything you mount below it.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #87 on: February 24, 2017, 09:52:51 AM »
I put the rear wheel back on just to see how it clears. I think it will be ok. Fenderless. Not sure what is the case if I put a fender on. Looking good with the seat.





-JP-
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: First build: CB750 K3 cafe
« Reply #88 on: February 24, 2017, 10:18:15 AM »
Are you going to keep an inner fender, so water and road grime doesn't get all over your electronics?
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #89 on: February 24, 2017, 10:21:36 AM »
Yes, I'm keeping the plastic one. Just have to chop it to size.
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: First build: CB750 K3 cafe
« Reply #90 on: February 24, 2017, 10:30:29 AM »
Quote from: -JP- on February 24, 2017, 10:21:36 AM
Yes, I'm keeping the plastic one. Just have to chop it to size.

I figured as much.  I've seen bikes that don't run any rear fenders and (even in California) the electronics look dirty and haggard.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #91 on: March 02, 2017, 11:34:50 PM »
Steering damper mounted and just trying to fit the rear light on. Looks really nice. That's the cleanest version I could come up with. Hopefully the wheel won't hit it.





-JP-
Logged

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: First build: CB750 K3 cafe
« Reply #92 on: March 03, 2017, 01:00:51 AM »
Personally, I'd install a Tarozzi fork brace before a stabilizer.


Sent from my iPhone using Tapatalk
Logged

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #93 on: March 03, 2017, 01:56:36 AM »
Front fender is off waiting to be cutted smaller. So it will not be ridden without it.
Logged

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #94 on: March 24, 2017, 04:35:36 AM »
Waiting some parts to arrive so it was time to make brackets for the rear turn signals. I also painted that emblem on the left cover.

I have to replace the front brake hydraulic pressure switch. It somehow stopped working during winter. License plate light has to be sorted out. I've seen some people riding already here in Finland. Still too cold for me. Maybe a month and it will be a season start.




-JP-
Logged

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #95 on: April 06, 2017, 07:01:22 AM »
I got everything back together. Side mounted the license plate and did wiring for the plate light. Looks good now. I also tried to start it, but it didn't idle well. It was firing all cylinders but something is not right. It ran with choke ok, but after I closed it the bike shut down. There was this sticky stuff coming out of the carb bowls. Drained it and opened it. Clean and the gas was clean too. Also the fuel filter was clean. Maybe the stuff is gasket sealant. Maybe. That won't explain why there is that same stuff on the air screw. Overall happy how the tail section looks now when all is done. Just have to figure out this running problem.

I tried also another mirror on as you can see from the pictures. I think I stick with the bar end ones...

-JP-
« Last Edit: November 27, 2018, 11:09:08 AM by -JP- »
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,070
  • I refuse...
Re: First build: CB750 K3 cafe
« Reply #96 on: April 06, 2017, 08:26:11 AM »
It looks like varnished fuel that was driven into the bowls. Perhaps from a petcock or orifice within the carbs? If it's oozing out of the seam, that would lead me to believe the fuel level is high enough to force the fluid up and out at that level. Might want to do a Clear Tube fuel level check.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline -JP-

  • Full Member
  • *
  • Posts: 83
Re: First build: CB750 K3 cafe
« Reply #97 on: April 06, 2017, 08:59:54 AM »
Ok. Thanks. Will do.


« Last Edit: November 27, 2018, 11:10:14 AM by -JP- »
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: First build: CB750 K3 cafe
« Reply #98 on: April 06, 2017, 09:54:01 AM »
That goo looks like varnished gas.  You might want to re-clean (ultrasound) your carbs again, too.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,070
  • I refuse...
Re: First build: CB750 K3 cafe
« Reply #99 on: April 06, 2017, 09:55:52 AM »
The other thing I meant to mention, if the air screws are seeping that goop, they are likely clogged up too and will negatively effect your carb tuning. It would not surprise me the bike is running rough with that seepage.  :(
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis
Pages: 1 2 3 [4] 5   Go Up
« previous next »