Author Topic: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod  (Read 34359 times)

0 Members and 1 Guest are viewing this topic.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #200 on: April 05, 2017, 09:32:15 AM »
Do you have any plans to have the stator rewound? I assume you have all new electrical parts coming in and just haven't gotten to that part of the build yet. I also do not know what sort of power it out put you want. Just kind of curious with your alternator/stator plans as you put this all back together.


Sent from my iPhone using Tapatalk

Ruckus2115,

Why would he need to consider having the stator rewound?  This is a part that VERY RARELY has issues.  Charging is anemic on CBSOHC4s compared to modern bikes, but the stator is NOT a common source of failure.  The usual culprit of a defective charging system is a short in the 40-year-old wiring. 

Here. Eric has no plans to run EFI or taxing electronic accessories that I am aware of, so the stock charging system should suffice.  IF he wanted to augment the charging system, he could go with an Anders-build 32 AMP upgrade, but that is overkill for his needs.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Ruckus2115

  • Full Member
  • *
  • Posts: 10
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #201 on: April 05, 2017, 11:27:26 AM »
I was really just curious if he had any plans for that area of the rebuild. Wasn't suggesting that he needs to. And from my research I have gathered that yes these are pretty bullet proof stators. Was really just wondering what else he planned to do with the rebuild. Wasn't a loaded question or anything. Genuine curiosity that's it.


Sent from my iPhone using Tapatalk

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #202 on: April 05, 2017, 11:43:27 AM »
Thanks for the info on the stator...So Far I have already picked up the wiring for an entirely new harness... i have an M-unit v.2 as the brain, new Ricks Reg/rec, Dyna Coils, dyna ignition, All New Moto-gadget 3 button momentary switches, New H4 headlight, LED tail light , and 4 spankin new Moto-gadget pin turn signals,  Also, My buddy Don helped me out by selling me a KOSO speedo/tach combo that i have mounted up to the front end in my garage at the moment...

I had Devin (at Cognito) drill and tap a couple bolt holes into the lower side of the top triple so I could mount a few different types of gauges.....

I may have bitten off more than I can chew with this as I've never wired a bike but I will take my time and have help from the pro's when needed.....I also picked up a full motogadget wiring kit to go along with it.

I've never put this much into a bike before ($ or time) so it is definitely initimidating but i know in the end it's going to be the EXACT BIKE That i wanted...... Always appreciate info/advice and a lot of the guys here have been awesome...

Don has been amazing, Cal helped me out with some wiring diagrams for literally the exact wiring job i'm doing....
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #203 on: April 05, 2017, 12:12:19 PM »
I was really just curious if he had any plans for that area of the rebuild. Wasn't suggesting that he needs to. And from my research I have gathered that yes these are pretty bullet proof stators. Was really just wondering what else he planned to do with the rebuild. Wasn't a loaded question or anything. Genuine curiosity that's it.


Sent from my iPhone using Tapatalk

Ruckus,

Hey. I wasn't trying to bite your head off or anything.  I had a charging issue on my first 750 and (and a proclaimed 750 guru) had me change the stator.  A few bucks later (on ebay) and lots of time lost, I still had the problem with a newer stator.  It turned out to be a short in the harness.  From years of other similar stories, it is almost always the wiring.  I've never heard of the stator crapping out, other than with severe crash/rash going through the side cover and into the stator.

The long and short of it is to check the charging system and make sure it is functioning within spec.  With a from scratch wiring harness, reproduction, or the old one, if there's a charging issue, FIRST check the wiring connections before re-wiring or replacing a stator.  Or, if you are going to convert to EFI, you will definitely need a charging system upgrade.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,905
  • Saver of unloved motorcycles.
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #204 on: April 08, 2017, 11:35:27 PM »
 I finally rode the K2 I bought with the K1 Wiseco? big bore engine, this thing is a beast. W0W!. I'd love to slap on a ported head and cam. 
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #205 on: April 13, 2017, 12:31:28 AM »
Hey Don R, That's awesome to hear!! I've only ever rode a stock 18K mile 78 cb750 and even that thing boogies pretty well!! so I am very excited to ride a real fresh hopped up version with the ported 836... this thing is going to scream and hopefully be pretty reliable.
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #206 on: April 13, 2017, 08:31:57 AM »
My K8 with a Wiseco 836, ported head and cam was no joke. 
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,567
  • Bike almost back to the 70's 2015
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #207 on: April 13, 2017, 09:58:17 AM »
Hey Don R, That's awesome to hear!! I've only ever rode a stock 18K mile 78 cb750 and even that thing boogies pretty well!! so I am very excited to ride a real fresh hopped up version with the ported 836... this thing is going to scream and hopefully be pretty reliable.
A CB750 like your project is a good and reliable touring machine!  Strong power that handles 2 persons with luggage bags and more really well. My bike had no problems twisting the throttle at around 150kmh to pass cars on Autobahn as well as highways in Italy, France and Spain. Cruise most of the day in 150-180kmh, sometimes even more.

Cam I used back in the touring days, meas when I timed it:  IN 257* 22/55, EX 260* 56/24 @0.04"lift   Lift@0 lash: 0.361"/0.361" (9.18mm)
Timing differed a  degree or 2 when I timed it several times. I looked for equal LC. Duration could be 2-3 * less too when tighten 0 lash better or use of tighter cam holders with rocker shafts.
You guys living in USA have a huge area to go by bike!
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,563
  • Big ideas....
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #208 on: April 13, 2017, 04:07:31 PM »
Hey Don R, That's awesome to hear!! I've only ever rode a stock 18K mile 78 cb750 and even that thing boogies pretty well!! so I am very excited to ride a real fresh hopped up version with the ported 836... this thing is going to scream and hopefully be pretty reliable.
You ride up here Eric and I'll take 1000cc CB out. You can try it too. ;)
Owner of the "Million Dollar CB"

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #209 on: April 13, 2017, 04:10:15 PM »
Hey Don R, That's awesome to hear!! I've only ever rode a stock 18K mile 78 cb750 and even that thing boogies pretty well!! so I am very excited to ride a real fresh hopped up version with the ported 836... this thing is going to scream and hopefully be pretty reliable.
You ride up here Eric and I'll take 1000cc CB out. You can try it too. ;)

Ride up there, Eric!   ;D
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline Ruckus2115

  • Full Member
  • *
  • Posts: 10
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #210 on: May 12, 2017, 05:49:28 AM »
How's the build going? I am doing a similar 836 kit and was wondering if you have installed the Super Rods? What's your opinion on those?

I'm trying to see if I should spring for new rods or get my stock rods polished and balanced..


Sent from my iPhone using Tapatalk

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #211 on: July 19, 2017, 11:18:22 AM »
Hey Fellas, hope everyone is doing well. I have been slacking real bad on the build...been trying to get in as much riding as possible.

Ruckus2115, The Super Rods are EXTREMELY well made pieces...I was looking at having the stock rods shot peened/polished but the small ends had a little bit of galling on them so i ended up saying "F" it and doing the Super Rods, they're absolutely beautiful, have nice heavy duty bolts and nuts and brass bushings in the small end. I ended up getting brand new bearing shells for the rods and the crank so this motor is litreally going to be a brand new Monster version of what honda produced back in 78.

I'll get back on the band wagon with updates and the build , now that all my cases and everything were vapor blasted by Nils (THE MAN by the way) , i'm ready to rock and roll.

I'll get crankin and post up my progress, first is to get that stubborn kick start back in and new bearings on the mainshaft and countershaft..... Thanks for all the support
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #212 on: October 30, 2017, 08:32:52 AM »
Can't believe how the time has flown...This build is getting done this winter. I'll post up the step by step, gotta dig into a huge box full of Freshly vapor blasted parts from Nils and start building!!! I know it's been a while, will get this thread going again.
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,567
  • Bike almost back to the 70's 2015
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #213 on: October 30, 2017, 10:14:02 AM »
Repairing, modifying a CB750 is a never ending story :-) You might change your mind about the build and change some with help of all other builds going on here!!
I have a K6 that need some repairs (leaking fork due to scratched tube).
I started a K2 build since I had a K2 case I could fill with leftover parts from my K6 and knew a K2 frame with registration i could buy. This will be a close stock with no engine mods.

What to do with my 836 cylinder, 900cc cylinder + old ported head with std valves + some cams + K6 transmission, clutch,  VM29 carbs I have? + 2 extra tank sets.
I need to find 2 cheap engines I can use...... This is a very addictive hobby thanks to this forum and all helpful resources with many years of experiences.
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #214 on: October 30, 2017, 10:17:43 AM »
I hear that , I have gathered a lot of CB parts over the past couple years. I do however also have a 100% bone stock 1978 CB750F Super Sport that I'm doing with my dad, and that is staying 100% Bone stock...I Even was lucky enough to track down an OEM Muffler (Black tip) that is in amazing shape... I'm so excited for that one too to have a completely original one.
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,567
  • Bike almost back to the 70's 2015
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #215 on: October 30, 2017, 10:25:59 AM »
That F bike can be worth some in the future when a lot of F bikes have been chopped to bobbers and what they are called in a way not possible to go back.
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,912
  • Bought her new 4/75
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #216 on: October 30, 2017, 11:10:34 AM »
FYI JamesW (??) has, what he says, is a rechromed 77/78 F exhaust he wants to sell. Texted me but I delete all texting after done with. For me THIS is a preferred way to communicate within SOHC4. Except for doing pictures which are MUCH easier for me to text.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #217 on: October 30, 2017, 11:16:27 AM »
yeah I'm so excited as I've gathered almost everything I need for it. all HONDA OEM stuff, The biggest hurdle I'm having is figuring out what to do with the pistons/rings. the motor has super low mileage and is not frozen but I would like to at least re-hone the cylinders while I'm in there....Haven't been able to find OEM rings for the 410 pistons and don't know if I can re-use the originals.....

took me 1.5 years to find that muffler.... they are not easy to come by.
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208

Offline NobleHops

  • Don ya be callin' me no
  • Expert
  • ****
  • Posts: 1,345
  • Misfit - Tucson, Arizona
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #218 on: November 14, 2017, 08:23:09 PM »
Holy smokes, I disappear for 3 months and you guys run amok. :-)

I am so overdue to post an update, things have been hopping and I have tons to fill you in on as usual.

Eric, thank you for the good words, and you too Don and Cal and Bryan the others, it's an honor to work with you guys.

N.
Nils Menten * Tucson, Arizona, USA

I have a motorcycle problem.

My build thread: NobleHops makes a 400F pretty for his wife: http://forums.sohc4.net/index.php?topic=131210.0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1978 CB750 - Re-born a 836cc Wiseco JMR Ported Hot Rod
« Reply #219 on: November 14, 2017, 08:35:51 PM »
Holy smokes, I disappear for 3 months and you guys run amok. :-)

I am so overdue to post an update, things have been hopping and I have tons to fill you in on as usual.

Eric, thank you for the good words, and you too Don and Cal and Bryan the others, it's an honor to work with you guys.

N.

Nils,

Are. you going to IMS Long Beach this weekend?
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold