« previous next »
Pages: [1] 2   Go Down

Author Topic: Wiring  (Read 3814 times)

0 Members and 1 Guest are viewing this topic.

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Wiring
« on: October 10, 2017, 08:07:34 PM »
I really need help understanding a wiring a new headlight and a new koso speedo on my 76 cb550k


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #1 on: October 11, 2017, 04:39:59 AM »
The stock headlight uses a WHITE wire for LO, BLUE wire for HI and GREEN for GROUND.

The Koso has a tach signal wire (often yellow) that you will wrap around the a plug wire (6-8 wraps) to provide the input signal. Power for it comes through the stock BLACK wire in your harness.

Sorry if that’s not enough explanation but you provided nothing for background  ;)
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #2 on: October 11, 2017, 04:44:09 AM »
Sorry, i have an ebay aftermarket integrated turn signal headlight doesnt have the stock 3 prong connection. And iam lost on which wires are the power on my stock harness.


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #3 on: October 11, 2017, 04:48:41 AM »
Might be helpful if you provided a bit more information about your non-stock stuff. Like a wiring diagram from it? Is your bikes harness stock? Switch controls stock?
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #4 on: October 11, 2017, 04:49:43 AM »
Yes everything is stock besides this speedo and headlight.


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #5 on: October 11, 2017, 04:54:10 AM »
So provide th actual headlight brand and model and the same for the koso. Better yet, post the wiring diagrams from them.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #6 on: October 11, 2017, 04:55:16 AM »



Sent from my iPhone using Tapatalk
Logged

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #7 on: October 11, 2017, 04:56:52 AM »



Sent from my iPhone using Tapatalk
Logged

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #8 on: October 11, 2017, 04:57:05 AM »
I dont have wiring diagram for the speedo


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #9 on: October 11, 2017, 05:03:27 AM »
There’s a bit more instructions on the headlight, clipped in your picture. Can you capture those written instructions?

The only thing that I’m unsure about is the 3rd wire for the turns, “stop” wire in red. That may be used with other types of bikes but it is not used on an SOHC.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #10 on: October 11, 2017, 05:33:53 AM »
So should i buy a new headlight?


Sent from my iPhone using Tapatalk
Logged

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #11 on: October 11, 2017, 05:34:39 AM »



Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #12 on: October 11, 2017, 06:33:22 AM »
Not necessary to buy a new one, it’s just going to require splicing and connecting to make it work.

Do you have the tools and skills to do the job?
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #13 on: October 11, 2017, 06:59:22 AM »
I have the tools but dont know which wires go where


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #14 on: October 11, 2017, 07:04:21 AM »
Start here for understanding of your stock harness:


I'll try to type up a table for each (headlight and speedo) to match to the stock harness shortly.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #15 on: October 11, 2017, 07:06:55 AM »
Yes i have this pic but im just weak at wiring it to headlight and speedo smh


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #16 on: October 11, 2017, 07:08:07 AM »
And here's the wiring/install instructions for your speedo:
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #17 on: October 11, 2017, 07:10:21 AM »



Sent from my iPhone using Tapatalk
Logged

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #18 on: October 11, 2017, 07:10:38 AM »
This is the speedo wires


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #19 on: October 11, 2017, 07:11:57 AM »
Quote from: Cb55076 on October 11, 2017, 07:06:55 AM
Yes i have this pic but im just weak at wiring it to headlight and speedo smh
You'll need to run to the auto parts store, or other electrical supply house, to grab some connectors/plugs. You need an H4 type 3 prong connector for the headlight. You can get that off the shelf. You'll push the new headlight wires into that, properly oriented. Then, you can plug and play the headlight. The "turn" signal wires will need a different and independent connector to mate to the stock wires.

You can either use a source like www.vintageconnections.com to obtain stock type, or cut the stock end from the switch housing and then install male/female connectors on both sides. You'll also want some solder (thin, rosin core type) and some shrink wrap.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #20 on: October 11, 2017, 07:14:17 AM »
I dont know how to solder nor shrink wrap


Sent from my iPhone using Tapatalk
Logged

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #21 on: October 11, 2017, 07:17:01 AM »
Yea thank you alot im just still overwhelmed will have to find a local person to pay to help with install


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #22 on: October 11, 2017, 07:18:08 AM »
Quote from: Cb55076 on October 11, 2017, 07:14:17 AM
I dont know how to solder nor shrink wrap
Please don't take this the wrong way, but, then you need to have someone who does have these minimal skills perform this install. Because the wiring carries current, if you do it wrong, you'll damage your components, blow fuses, and melt wires. Nothing catastrophic, but certainly damn expensive and it will render your bike inoperable. If you were just a little bit closer, I'd be happy to do it with you. But you're on the wrong coast for me  ;)

If you find a pal with skills, let me know. I'll happily provide you a map for wiring these devices into your stock harness correctly so they only need to do the work without decoding anything.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline Cb55076

  • Full Member
  • *
  • Posts: 42
Re: Wiring
« Reply #23 on: October 11, 2017, 07:34:46 AM »
I dont know even where my fuses are i looked but cant find them


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,100
  • I refuse...
Re: Wiring
« Reply #24 on: October 11, 2017, 07:57:25 AM »
They should be under the seat, under the triangular body panel. That’s where your stock “electrics” are
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis
Pages: [1] 2   Go Up
« previous next »