Thanks Per, yep, with so many bikes I need to keep them all in serviceable condition, and the only way I'll do that is to ride them all regularly.
David, 137 MPH is a "Go straight to jail and have your bike confiscated from you, permanently" speed, so of course, I'd never entertain breaking those rules........... We have really tough road laws here, but a tiny annual road fatality rate compared to the US, so it does make sense, as annoying as that might be.
The wonderful news is that after standing in line with my mask on for (only) 2.25 hours today, I got my "Club permit" for the K0 so I can (legally) ride it, and it's insured for $20K AUD plus $3K for riding equipment, if I throw it down the road (and hopefully survive) I also get the damaged bike back to rebuild if the worst happens. I've just paid John (Benelli SEI here) for his OEM K0 handlebar switchblocks, and while standing in line at the DMV, I bought a set of OEM handlebars from France, so it's getting closer to OEM as parts become available.
Tomorrow I'll be taking it for a 100 (+) miler, and am looking forwards to enjoying a comfortable old CB750 for a change. Old bikes (in good condition) are much easier to ride at legal speeds than new bikes! I did have a problem shifting back to 1st gear at the lights, but after taking the tranny cover off again today I realised that the shifter "arm" was rubbing against the inside of the shifter drum and not engaging with the pins, so I did some creative bending with a pair of pliers, then reassembled it and did a 3 mile ride around the streets so I could test it to ensure I could engage first gear from second, and it's spot on now.
As the guys who've put some of these engines together will notice, it's very different from a CB750K1 and onward setup.
K0 Tuesday 29 Dec 2020 7 by
Terry Prendergast, on Flickr
I screwed my new number plate on, and even used Honda -K0 only- "Big 8" bolts to hold it on, how's that for originality?!
K0 Tuesday 29 Dec 2020 6 by
Terry Prendergast, on Flickr