« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: Japanese Screwdrivers  (Read 24649 times)

0 Members and 1 Guest are viewing this topic.

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Japanese Screwdrivers
« Reply #25 on: November 26, 2009, 11:01:50 AM »
Quote from: 754 on November 26, 2009, 10:43:13 AM
The older Craftsman blue handle #3 screwdriver fits the 750 clutck cover scres really well and maybe the points cover..

I use that same, old screwdriver.  Do the new ones not fit as well?

mystic_1
Logged
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline Ogri

  • Thinks he's a
  • Hot Shot
  • ***
  • Posts: 331
Re: Japanese Screwdrivers
« Reply #26 on: November 26, 2009, 01:49:52 PM »
Hmmm, I just thought I'd keep an eye out for the correct fitting screwdriver. The seed was planted by a guy on ebay selling kits of correct J.I.S cross-head screws for sohc fours:

http://cgi.ebay.co.uk/Original-Style-JIS-small-head-Phillips-Screw-Pack-x50_W0QQitemZ280429683721QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item414ae96409
Logged

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: Japanese Screwdrivers
« Reply #27 on: November 26, 2009, 02:13:41 PM »
I've always assumed that the #3 JIT was similar in size to the #3 Phillips, but really I have no idea.

mystic_1
Logged
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline crazypj

  • I'm brill, me
  • Old Timer
  • ******
  • Posts: 4,467
  • first 100,000 miles. 1977 CB550F
Re: Japanese Screwdrivers
« Reply #28 on: November 26, 2009, 06:18:58 PM »
I just grind the tip of #3 Phillips slightly so drive 'wings' don't slip.
 Not ideal but easier than looking for the several JIS I've got stashed 'real safe' (OK, some people may say lost  ;D)

PJ
Logged
I fake being smart pretty good
'you can take my word for it or argue until you find out I'm right'

Offline Ecosse

  • Really Old Timer ...
  • *******
  • Posts: 5,051
  • Member #4139
    • My 550 walk around video
Re: Japanese Screwdrivers
« Reply #29 on: December 04, 2009, 02:08:57 AM »
wow, i just learned something today... "jis".

my lernin kwota is fild 4 tha week.
Logged
1974 CB550K     
                 
            Help stop TORTURE and SLAUGHTER of cats, dogs, and other kept animals.                                                  www.animalsasia.org

                                  Your 1%er name

                                                A WORTHY EFFORT: http://www.honorflight.org.

Offline switchum

  • Old Timer
  • ******
  • Posts: 2,910
    • Studio Switchum facebook page
Re: Japanese Screwdrivers
« Reply #30 on: December 25, 2009, 08:12:36 AM »
I got JIS screw driver set for Christmas. Rebuilding carbs are so much easier with them.  Of course if the screw heads are not buggered up by someone else already...
Logged

Offline SWEETPEAUK

  • Full Member
  • *
  • Posts: 52
Re: Japanese Screwdrivers
« Reply #31 on: December 25, 2009, 10:53:12 PM »
Drive size 1 covers M2-M2.6. Drive size 2 covers M3-M5 Drive size 3 covers M6-M8 drive4 is for size M10
Hopes this helps.
Logged

Offline mark

  • finds nothing amusing about being an
  • Old Timer
  • ******
  • Posts: 2,939
  • we're out here and this is where we are.
Re: Japanese Screwdrivers
« Reply #32 on: January 11, 2010, 07:31:50 PM »
A while back I was poking through a box of random cheap old tools at a second-hand store. Found a couple of '60s Honda wrenches, plus a plug wrench and screwdriver that looked about right. Screwdriver handle said VESSEL.

JIS impact driver bits +2 +3 +4 at VESSEL site.

They sell Phillips screwdrivers too - identified P1 P2 etc.
Logged
1976 CB550K, 1973 CB350G, 1964 C100

Quote from: HavocTurbo on March 19, 2009, 09:31:01 AM
F you mark...... F you.

Offline flybackwards

  • Enthusiast
  • **
  • Posts: 160
Re: Japanese Screwdrivers
« Reply #33 on: January 11, 2021, 10:17:49 AM »
Vessel tools - excellent - but a bit expensive...
Logged

Offline StockRider

  • Sustaining SOHC/4
  • Enthusiast
  • **
  • Posts: 198
  • Well, I thought it was stock...
Re: Japanese Screwdrivers
« Reply #34 on: January 11, 2021, 10:27:57 AM »
Quote from: flybackwards on January 11, 2021, 10:17:49 AM
Vessel tools - excellent - but a bit expensive...
Agreed. I was excited to open and use the set I was gifted over the holidays!
Logged
'70 CB750K0 - "Truck" | 4x4 | 4 Cables/4 Carbs/4 Cyls/4 Pipes | PO: "Old J.O.", a.k.a. Dad, Ride Free Brother!

Offline Magpie

  • Old Timer
  • ******
  • Posts: 3,298
Re: Japanese Screwdrivers
« Reply #35 on: January 11, 2021, 04:44:33 PM »
These are great! JIS screwdriver with built in impact driver. https://www.vesseltools.com/handtools/screwdrivers/impact/980-kit-2-detail
Cheers, Cliff.
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,324
  • Central Texas
Re: Japanese Screwdrivers
« Reply #36 on: January 11, 2021, 06:30:34 PM »
Quote from: flybackwards on January 11, 2021, 10:17:49 AM
Vessel tools - excellent - but a bit expensive...

Quality tools aren’t cheap. But they can be cheaper if the cheap China tool breaks and has to be replaced (been there)
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline gpzkat

  • Hot Shot
  • ***
  • Posts: 265
Re: Japanese Screwdrivers
« Reply #37 on: January 11, 2021, 07:15:53 PM »
I got these off Amazon and use with my impact driver, or with a screwdriver using a socket (and a bit of tape if needed). 

https://www.amazon.com/Impact-Driver-Japanese-Standard-Screws/dp/B07YNTRXC8/ref=sr_1_2?dchild=1&keywords=AB+Tools-Laser+impact+jis&qid=1610421204&sr=8-2
Logged
Pages: 1 [2]  All   Go Up
« previous next »