Topic: 1975 Honda CB750P2 Police Restoration - White Gold

[BenelliSEI]

Exceptional!

[Michael86]

Hey!

Any chance you have the wiring diagram for the police additions on this bike? I have a 76 and I'm trying to determine all the add-ons.

[stou]

Wow!!! Very nice work...  and probably very expensive with all those NOS part$!

[Michael86]

Update for anyone who sees my post above - but JamesH on the UK forum posted an image of a wiring diagram for the '75 750P. If anyone here has a high res image or PDF that would be awesome otherwise at least I have something!

[HondaMan]

Cheers guys - smashing a pint of IPA and having a play with the design of the siren bracket in CAD to see if I can use a 3D printed part and still tighten the rear upper engine bolt without crushing the 3D printed plastic material (PLA).

Current thinking is to recess an M10 washer within a recessed pocket and use an M10x25 washer under the nut to transmit the load. I’m sure there’s a better way but the beer is flowing ha ha..

Absolutely stunning work, James!
A thought about the plastic bracket: could you use a thin nut to hold the engine's bolt, then the plastic bracket, topped off with another thin nut?
This used to be how we fitted some of the front case-crash protection bars, back in the day...