Topic: Cool Tools.

[dave500]

Here's my homemade cool tool to press on a harmonic balancer, It's a threaded rod welded to a bolt, a mustang 2 strut washer, and some nuts and bolts and then here's a store-bought kit. The kit includes a bearing that keeps things sliding smoothly.

theres something about homemade pullers I like!I have a few made for one off jobs.

[BenelliSEI]

In response to a PM earlier today: Here is the tank mount I made for my S/C tank. The “Paintless Dent Removal” guy did an outstanding job, but he needed a way to secure the tank, in his shop. The underside of the plywood “tray” has a 2 X 4 glued and screwed to it, so he could clamp everything into a large vice.

[Ozzybud]

Just got this flex shaft polishing tool for Christmas. What a game changer for polishing parts on our bikes in Situ.
500 to 25000 rpm with a foot pedal.

[grcamna2]

Just got this flex shaft polishing tool for Christmas. What a game changer for polishing parts on our bikes in Situ.
500 to 25000 rpm with a foot pedal.

Wow !  That's a Beaut 
Could I get a better look at the box ?

[Ozzybud]

Just got this flex shaft polishing tool for Christmas. What a game changer for polishing parts on our bikes in Situ.
500 to 25000 rpm with a foot pedal.

Wow !  That's a Beaut 
Could I get a better look at the box ?

Here is an Amazon link.  I found the lowest price the box was not. Marked. Looks like the same unit is marketed by many sellers. I payed $54.00
Some of the others didn't say the chuck went up to 1/4  inch. A lot of my instruments have 1/4 shanks

https://www.amazon.com/s?k=rotary+tool

[grcamna2]

Just got this flex shaft polishing tool for Christmas. What a game changer for polishing parts on our bikes in Situ.
500 to 25000 rpm with a foot pedal.

Wow !  That's a Beaut 
Could I get a better look at the box ?

Here is an Amazon link.  I found the lowest price the box was not. Marked. Looks like the same unit is marketed by many sellers. I payed $54.00
Some of the others didn't say the chuck went up to 1/4  inch. A lot of my instruments have 1/4 shanks

https://www.amazon.com/s?k=rotary+tool

Thank you.

[Kelly E]

We use a lot of cardboard in the shop for everything from laying on to containing messes. I've been meaning to make a cart to hold it all so it isn't sliding out in the way. I remembered I had another old bed frame so we cut it up and along with some 1" strap we made a cardboard cart. It keeps the cardboard contained and rolls easily out of the way.