Will these CV carbs switch out with the Mechanical carbs on a 80 cb650..... Thanks
They will... but you gotta make 'em work to an extent.
3 things needed really.
1 the '81/82 cb650 CV carbs
2 '84 through '91(?92) carb isolators off of a kawasaki ninja.
3 the appropriate throtthe cables for the '81/'82 cb650 CV carbs.
Soos, look what I just found on craigslist....
"parting out 2 kawasaki zx600's,1990 zx600D and 1986 zx600A,Let me know what ya need."
My carbs seem to be fine for now(were leaking) but wondering if I should buy these carbs also...
Going to buy the isolators for sure.
Thanks for putting this in my head....Came across it and was like sweet I know what I could do
with these..
We're at 15 now!
The isolators are definitely needed for the ZX600 carbs on a '79/'80 cb650 with the non-CV head.
If you have a '81/'82 cb650 with the CV head... you can pretty much drop them in.
Same spacing as the CV cb650 stockers.
They even fit the stocker cb650 carb isolators.
Easy to clean, easier than any other carb I have seen to adjust the jet needle position...
nice overall.
If you get a chance go look at the carbs in person if you plan on buying them.
Always go for the newest you can, as the rubber will be that much newer internally.
Unless he is wrong on the bike years, both of those SHOULD have the same carbs.
they didn't change the ZX600 carbs until... '92? '93??
For the isolators, if he asks more than $25 for them, look on feebay.
I keep snagging sets for under $20.00
The carbs however tend to go for about $60-$160 a set on feebay.
If you get those, i'll gladly help you as much as I can.
PM me if you get them and have any Q's.
l8r
