« previous next »
Pages: 1 [2] 3 4 5   Go Down

Author Topic: What parts, if any, are exactly the same across all models?  (Read 7853 times)

0 Members and 2 Guests are viewing this topic.

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: What parts, if any, are exactly the same across all models?
« Reply #25 on: April 08, 2009, 05:53:05 PM »
You must be really bored at the new job ::).  I believe the 650 coils ar diff as we have "CDI" igy. 
How about the plastic throtle tube??????   I believe we need another beer. Or a few.
Logged
18 grand and 18 miles dont make you a biker

fuzzybutt

  • Guest
Re: What parts, if any, are exactly the same across all models?
« Reply #26 on: April 08, 2009, 05:58:04 PM »
throttle tube gets my vote
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: What parts, if any, are exactly the same across all models?
« Reply #27 on: April 08, 2009, 06:17:25 PM »
Tire air.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: What parts, if any, are exactly the same across all models?
« Reply #28 on: April 08, 2009, 06:57:51 PM »
Throttle tube, not.. early had only one cable!

Stem nut & washer ,
probably steering balls, races, and washer and rubber seal.
tire stem valve core
Shock stud bolts, maybe lower bolt.
Headlight ring mount screws
Handlebar clamp bolts
petcock hose clips
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: What parts, if any, are exactly the same across all models?
« Reply #29 on: April 08, 2009, 07:00:50 PM »
Horn button
Taillight bulb
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline HondaMan

  • Someone took this pic of me before I became a
  • Really Old Timer ...
  • *******
  • Posts: 13,861
  • ...not my choice, I was nicknamed...
    • Getting 'em Back on the Road
Re: What parts, if any, are exactly the same across all models?
« Reply #30 on: April 08, 2009, 07:15:17 PM »
Gordon has it right: 754 is half right (the 500/550 and 350F had 1034 bulbs, 750 had 1157 when they were new). Instrument lamps and idiot light bulbs were the same.
Logged
See SOHC4shop@gmail.com for info about the gadgets I make for these bikes.

The demons are repulsed when a man does good. Use that.
Blood is thicker than water, but motor oil is thicker yet...so, don't mess with my SOHC4, or I might have to hurt you.
Hondaman's creed: "Bikers are family. Treat them accordingly."

Link to Hondaman Ignition: http://forums.sohc4.net/index.php?topic=67543.0

Link to My CB750 Book: https://www.lulu.com/search?adult_audience_rating=00&page=1&pageSize=10&q=my+cb750+book

Link to website: www.SOHC4shop.com

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,031
  • CB500 Number 1000036
Re: What parts, if any, are exactly the same across all models?
« Reply #31 on: April 08, 2009, 09:04:48 PM »
If you mean a part that will fit on ANY Honda the answer is easy

NOTHIN
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: What parts, if any, are exactly the same across all models?
« Reply #32 on: April 08, 2009, 09:07:32 PM »
Valve stem core, would probably fit all..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,031
  • CB500 Number 1000036
Re: What parts, if any, are exactly the same across all models?
« Reply #33 on: April 08, 2009, 09:25:24 PM »
Nope, used short ones on tubless rim valves
Logged
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!

Offline 333

  • Time for change
  • Really Old Timer ...
  • *******
  • Posts: 7,557
  • Mail List Member #162 - Call me Stan
Re: What parts, if any, are exactly the same across all models?
« Reply #34 on: April 08, 2009, 09:40:56 PM »
I'm with Gordon.  Oil filters.  As a former Honda parts dude, the oil filter and associated o-rings, housing and filter bolt are the closest thing to fitting all SOHC4s.  And aside of the standardized nuts, bolts and bulbs.
Logged
Go metric, every inch of the way!

CB350F0  "Scrouching Tiger"
CT70K0    "Sneezing Poodle"

www.alexandriaseaport.org

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: What parts, if any, are exactly the same across all models?
« Reply #35 on: April 09, 2009, 08:52:44 AM »
Quote from: HondaMan on April 08, 2009, 07:15:17 PM
Gordon has it right: 754 is half right (the 500/550 and 350F had 1034 bulbs, 750 had 1157 when they were new). Instrument lamps and idiot light bulbs were the same.

Instrument lamps on the K0 750 are same as the later ones with a totally different idiot light cluster?
Logged
No.

Offline mattcb350f

  • Hardly a
  • Master
  • *****
  • Posts: 1,625
  • 1974 CB350F
Re: What parts, if any, are exactly the same across all models?
« Reply #36 on: April 09, 2009, 09:00:02 AM »
Correct me if I'm wrong (I know someone will  ;D ), but I think the valve guides are the same on all SOHC/4's.

 Matt.
Logged
1974 CB350F,  1980 CB125S,  1981 XL80S
Non Honda's: 86 & 87 Husqvarna 400wr's

My CB350F resto: http://forums.sohc4.net/index.php?topic=30467.0
Gallery at:
http://gallery.sohc4.net/main.php?g2_itemId=298318

Offline Soos

  • Just a butcher with a carbide hatchet, definitely not a
  • Master
  • *****
  • Posts: 2,324
Re: What parts, if any, are exactly the same across all models?
« Reply #37 on: April 09, 2009, 09:10:22 AM »
Quote from: heffay on April 08, 2009, 12:17:00 PM
aside from the name.   8)


air in the tires.... :)
Logged
-=≡ Soos ≡=-
Just think to yourself what would Alowishus Devander Abercrombie do?
"Brix will be shat by your neighbors." - schwebel
(61mm)652cc 1979 cb650

Offline Soos

  • Just a butcher with a carbide hatchet, definitely not a
  • Master
  • *****
  • Posts: 2,324
Re: What parts, if any, are exactly the same across all models?
« Reply #38 on: April 09, 2009, 09:15:55 AM »
Quote from: mattcb350f on April 09, 2009, 09:00:02 AM
Correct me if I'm wrong (I know someone will  ;D ), but I think the valve guides are the same on all SOHC/4's.

 Matt.

Dunno, MReick would know better than me, but aren't cb750 valve stems a bigger diameter at the stem than cb650 stems?

cb750's are 6.5mm right?
I know cb650's are 5.5mm.


l8r

What about the headlight?



Logged
-=≡ Soos ≡=-
Just think to yourself what would Alowishus Devander Abercrombie do?
"Brix will be shat by your neighbors." - schwebel
(61mm)652cc 1979 cb650

Offline Soos

  • Just a butcher with a carbide hatchet, definitely not a
  • Master
  • *****
  • Posts: 2,324
Re: What parts, if any, are exactly the same across all models?
« Reply #39 on: April 09, 2009, 09:16:51 AM »
Quote from: bryanj on April 08, 2009, 09:04:48 PM
If you mean a part that will fit on ANY Honda the answer is easy

NOTHIN

I got it.... the rider!

haha!, knew something would cross over well!
Logged
-=≡ Soos ≡=-
Just think to yourself what would Alowishus Devander Abercrombie do?
"Brix will be shat by your neighbors." - schwebel
(61mm)652cc 1979 cb650

Offline Tower

  • Only at conception could I have been called a
  • Hot Shot
  • ***
  • Posts: 704
  • My personal time machine: 1973 CB750K3
Re: What parts, if any, are exactly the same across all models?
« Reply #40 on: April 09, 2009, 09:20:11 AM »
kick start rubber?

certain clutch discs (but not all)
Logged

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: What parts, if any, are exactly the same across all models?
« Reply #41 on: April 09, 2009, 09:29:14 AM »
i knew this would be an interesting thread... kinda like oil or octane.   ;D
Logged
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: What parts, if any, are exactly the same across all models?
« Reply #42 on: April 09, 2009, 09:47:10 AM »
Quote from: Tower on April 09, 2009, 09:20:11 AM
kick start rubber?


BZZzzzzt!

750 K0's had a different kickstart rubber.

mystic_1
Logged
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline Soos

  • Just a butcher with a carbide hatchet, definitely not a
  • Master
  • *****
  • Posts: 2,324
Re: What parts, if any, are exactly the same across all models?
« Reply #43 on: April 09, 2009, 09:47:59 AM »
Quote from: Tower on April 09, 2009, 09:20:11 AM
kick start rubber?

certain clutch discs (but not all)

no kicker on the 650.
Logged
-=≡ Soos ≡=-
Just think to yourself what would Alowishus Devander Abercrombie do?
"Brix will be shat by your neighbors." - schwebel
(61mm)652cc 1979 cb650

Offline Patrick

  • Expert
  • ****
  • Posts: 1,398
Re: What parts, if any, are exactly the same across all models?
« Reply #44 on: April 09, 2009, 09:54:32 AM »
I've never worked on any except for 750s, but I'll play. How about the front axle?
Logged
1970 CB750 K0
1982 VF750S Sabre
1987 VT1100 Shadow
1979 Yamaha XS11
1969 Yamaha DT1B
etc.

Offline Soos

  • Just a butcher with a carbide hatchet, definitely not a
  • Master
  • *****
  • Posts: 2,324
Re: What parts, if any, are exactly the same across all models?
« Reply #45 on: April 09, 2009, 09:58:03 AM »
How about the caps that hold the axle in place?

I know the cb650 and 750 forks are different... but those I remember being somewhat similar...
it's been a while since I've seen a 750 next to a 650 though.


Wrist pins? No I be they are diff. length on the 550/650/750's
circlips? Gotta be the same. ??
(on a stock bike, no counting the delrin wrist pin buttons on some of the 836 kits)


Logged
-=≡ Soos ≡=-
Just think to yourself what would Alowishus Devander Abercrombie do?
"Brix will be shat by your neighbors." - schwebel
(61mm)652cc 1979 cb650

Offline ttr400

  • Hot Shot
  • ***
  • Posts: 566
    • ttr400 Projects and Billet parts.
Re: What parts, if any, are exactly the same across all models?
« Reply #46 on: April 09, 2009, 09:58:20 AM »
4 pages so far and nobody has mentioned...........wait for it..

Tappet cover caps..!!

Kevin
Logged
CB400F- 492 Yoshi Racer.
Cb400F- 466 Yoshi Cafe.
CR750 D Mann Replica.
VFR750R- RC30 - 1988.
www.ttr400.com

Offline Soos

  • Just a butcher with a carbide hatchet, definitely not a
  • Master
  • *****
  • Posts: 2,324
Re: What parts, if any, are exactly the same across all models?
« Reply #47 on: April 09, 2009, 09:59:29 AM »
nope the 650 has diff. ones than the 550/750's do.
WAY different.



l8r
Logged
-=≡ Soos ≡=-
Just think to yourself what would Alowishus Devander Abercrombie do?
"Brix will be shat by your neighbors." - schwebel
(61mm)652cc 1979 cb650

Offline ttr400

  • Hot Shot
  • ***
  • Posts: 566
    • ttr400 Projects and Billet parts.
Re: What parts, if any, are exactly the same across all models?
« Reply #48 on: April 09, 2009, 10:08:56 AM »
Yep your right, would have to be the 650 to put a spanner in the works..

Kevin
Logged
CB400F- 492 Yoshi Racer.
Cb400F- 466 Yoshi Cafe.
CR750 D Mann Replica.
VFR750R- RC30 - 1988.
www.ttr400.com

Offline Soos

  • Just a butcher with a carbide hatchet, definitely not a
  • Master
  • *****
  • Posts: 2,324
Re: What parts, if any, are exactly the same across all models?
« Reply #49 on: April 09, 2009, 10:12:01 AM »
Thats what I am here for you know~!


Glad to fulfill my job well here......



What about jets?
Mainjets.
Logged
-=≡ Soos ≡=-
Just think to yourself what would Alowishus Devander Abercrombie do?
"Brix will be shat by your neighbors." - schwebel
(61mm)652cc 1979 cb650
Pages: 1 [2] 3 4 5   Go Up
« previous next »