« previous next »
Pages: [1]   Go Down

Author Topic: What does it need?  (Read 1602 times)

0 Members and 1 Guest are viewing this topic.

Offline texaninseattle

  • lots of protein in my
  • Enthusiast
  • **
  • Posts: 249
  • OHH Canada
What does it need?
« on: May 14, 2009, 10:21:28 AM »
Ok so I have working on this bike in my backyard for a bit now, and its finally road worthy.

I snapped some quick photos, and well, it just looks boring to me. So, whats missing?

I need some ideas here people


« Last Edit: May 14, 2009, 10:25:34 AM by texaninseattle »
Logged
1978 Cb550k(Sold)
emgo pods
mac 4-1
105 mains
stock pilots
needles set 1 step richer than stock
IMS 2 turns out
1982 Suzuki GS850g

Offline BlindJoe

  • Expert
  • ****
  • Posts: 1,184
Re: What does it need?
« Reply #1 on: May 14, 2009, 10:25:16 AM »
rockets
Logged

Offline DammitDan

  • Prodigal Son
  • Master
  • *****
  • Posts: 2,470
  • It lives!
Re: What does it need?
« Reply #2 on: May 14, 2009, 10:26:44 AM »
It needs a brace on the rear of that exhaust...  Hanging kinda low, ain't it?  ;)
Logged
CB750K4

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: What does it need?
« Reply #3 on: May 14, 2009, 10:27:38 AM »
I don't think it needs anything. It's a good, classic, not-quite-original UJM. Only thing I'd suggest is some kind of clip to hold the exhaust on near the header to muffler junction. Maybe theres one there, but I can't see it.
Logged
No.

Offline DammitDan

  • Prodigal Son
  • Master
  • *****
  • Posts: 2,470
  • It lives!
Re: What does it need?
« Reply #4 on: May 14, 2009, 10:28:45 AM »
I would do something with the seat, too...  Seems kinda, bland.  Maybe add some chrome trim to the bottom edge?
Logged
CB750K4

Offline martino1972

  • Expert
  • ****
  • Posts: 1,227
  • and still a expert welder,period...
Re: What does it need?
« Reply #5 on: May 14, 2009, 10:37:59 AM »
a wild paint job.....different seat.......lower it a bit in the back.......do something with that rear fender...etc..

you,sir need to spend a day or two browsing in the project shop thread..... ;) ;) ;)

oh,and the inspiration thread.....

(not downing your bike here at all,i like it.....but you said you find it boring,so.... ::) )
Logged
Marti, I want you to know, I like you an awful lot, but guys have said far less and left wearing their drinks on their shirts.
http://forums.sohc4.net/index.php?topic=36933.0  (my bobber)

Offline Chester345

  • will someday be an...
  • Expert
  • ****
  • Posts: 929
  • 76 CB750F
Re: What does it need?
« Reply #6 on: May 14, 2009, 10:39:47 AM »

I think you should have your avatar chick sit on it for the next round of pics and we'll see if that dresses it up!
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: What does it need?
« Reply #7 on: May 14, 2009, 10:46:26 AM »
I kind of like the way it looks right now.  Low-key and clean.  I agree with adding some trim to the seat, though.  And how about some side cover emblems?
Logged

Offline Tim.

  • Master
  • *****
  • Posts: 1,945
  • www.DOTHETON.com
    • DO THE TON
Re: What does it need?
« Reply #8 on: May 14, 2009, 10:50:04 AM »
Thinner trimmer seat - its too bulky, and some bling on the seat/sidecovers/tank - all a little bland.

One small detail - I think the headlight ears would look better if they were inverted.

The black front signal lights make me want to make the headlight ears, fenders, fork lowers etc. all black.
Logged
Roule comme dans les années 70...   Roll as in the Seventies...

fuzzybutt

  • Guest
Re: What does it need?
« Reply #9 on: May 14, 2009, 11:49:50 AM »
maybe maybe a different or modified seat but really, i like it just like it is, i'd leave it alone.
Logged

Offline DammitDan

  • Prodigal Son
  • Master
  • *****
  • Posts: 2,470
  • It lives!
Re: What does it need?
« Reply #10 on: May 14, 2009, 11:52:20 AM »
Quote from: tintin on May 14, 2009, 10:50:04 AM
One small detail - I think the headlight ears would look better if they were inverted.

Good call on the ears.  And maybe some black Napoleon bar end mirrors instead of the stalks?
Logged
CB750K4

Offline goon 1492

  • Sucka Repellant
  • Master
  • *****
  • Posts: 2,088
  • RIGHT ON TO THE REAL AND DEATH TO THE FAKERS
Re: What does it need?
« Reply #11 on: May 14, 2009, 01:16:41 PM »
Quote from: Chester345 on May 14, 2009, 10:39:47 AM

I think you should have your avatar chick sit on it for the next round of pics and we'll see if that dresses it up!
Yeah and quit moving, that toe is nice!
Logged
We are not humans going thru a spiritual experience...
We are spirits going thru a human experience....

Offline goon 1492

  • Sucka Repellant
  • Master
  • *****
  • Posts: 2,088
  • RIGHT ON TO THE REAL AND DEATH TO THE FAKERS
Re: What does it need?
« Reply #12 on: May 14, 2009, 01:17:45 PM »
Also needs a dual disc up front with one of my drill patterns making it holy.
Nice bike though. ;D
Logged
We are not humans going thru a spiritual experience...
We are spirits going thru a human experience....

Offline 333

  • Time for change
  • Really Old Timer ...
  • *******
  • Posts: 7,558
  • Mail List Member #162 - Call me Stan
Re: What does it need?
« Reply #13 on: May 14, 2009, 02:41:03 PM »
The seat is missing the grab rail.  And the turn signals are missing.  But I'm sure you already knew that.  But that's why is looks like something is missing.  Because it is.
Logged
Go metric, every inch of the way!

CB350F0  "Scrouching Tiger"
CT70K0    "Sneezing Poodle"

www.alexandriaseaport.org

Offline Frankencake

  • Yesssssss,
  • Master
  • *****
  • Posts: 1,847
  • "I like the old junk"
Re: What does it need?
« Reply #14 on: May 14, 2009, 02:53:42 PM »
Ditch the seat.  Try a stock seat or a cafe.  Whatever you do, the ass end looks way too fat with that after market tush cushion.  Bar end mirrors would trim up the eyebrow antenna look in the front.  Definitely put something/i] on your side covers.  That space is way too big to have just a black space there and a small emblem or badge would define the shape of the covers.  Buck up that exhaust a bit and there ya go.  Think about your rear fender, too.  Maybe loose the stock light and shorten the fender up by shoving it forward and throwing a bolt in it.  If you are going to keep your fender as it is, try putting the rear grab bar back on.  It'll break up that line between the frame and seat a bit and the us sweep will shorten the tail appearance.  That is all.  I think have a grab rail if you want.  Pm me and I'll check.
Logged
"Sure, if you don't want that bike in your backyard, I guess I'll take it."  "I'll probably just scrap it......"

Frankencake:  Brotherhood of the unemployed?  What's our secret handshake?

333:  Think "Shakeweight".

Offline Frankencake

  • Yesssssss,
  • Master
  • *****
  • Posts: 1,847
  • "I like the old junk"
Re: What does it need?
« Reply #15 on: May 14, 2009, 02:58:47 PM »
Quote from: texaninseattle on May 14, 2009, 02:56:29 PM
as far as the seat is concerned...could I just shave the hump down and put the cover back on?
If you can get the upholstery to behave.
Logged
"Sure, if you don't want that bike in your backyard, I guess I'll take it."  "I'll probably just scrap it......"

Frankencake:  Brotherhood of the unemployed?  What's our secret handshake?

333:  Think "Shakeweight".

Offline Inkscars

  • grumpiness comparable to an
  • Old Timer
  • ******
  • Posts: 3,344
  • I have a box. I'm used to being ignored.
Re: What does it need?
« Reply #16 on: May 14, 2009, 03:07:34 PM »
I have a grab rail for my 77 sitting around.  ???
Logged
And who the hell named us; click-click-click-click-click-click

81 Hardly Davisson

scrapvalue

  • Guest
Re: What does it need?
« Reply #17 on: May 14, 2009, 03:19:58 PM »
It needs to be ridden more and looked at less.
But really, you have just been looking at it to long and it has become boring to you.
Keep looking on ebay and at other bikes and something will come to you.
That will be 2 cents please!
Logged

Offline boatsdickson

  • Hot Shot
  • ***
  • Posts: 673
  • 1978 836 K8
Re: What does it need?
« Reply #18 on: May 15, 2009, 11:35:29 AM »
Just looks like it needs a rider. Now enjoy your friday and go ride. What you really want will come to ya, in about 200 miles or so. And dont listen to anything cafe related, thats what you do when youve flat run out of ideas.  8)
Logged
"No. We're all our own prisons, we are each all our own wardens and we do our own time. I can't judge anyone else. What other people do is not really my affair unless they approach me with it. Prison's in your mind. Can't you see I'm free"?  Testimonial of Charles Manson

Offline ff154

  • Full Member
  • *
  • Posts: 34
Re: What does it need?
« Reply #19 on: May 15, 2009, 12:41:40 PM »
It looks like it needs a rider to me.  Who cares what anybody else thinks it needs, if you like it then go ride it like you stole it!
Logged

Offline sangyo soichiro

  • Tuck
  • Master
  • *****
  • Posts: 2,167
  • ☢ the atomic playboy ☠
Re: What does it need?
« Reply #20 on: May 15, 2009, 12:59:40 PM »
Quote from: texaninseattle on May 14, 2009, 10:21:28 AM
I snapped some quick photos, and well, it just looks boring to me. So, whats missing?


In-line fuel filters.   :D
Logged
1974 CB 750
1972 CB 750 http://forums.sohc4.net/index.php/topic,57974.0.html
1971 CL 350 Scrambler
1966 Black Bomber
Too many others to name…
My cross country trip: http://forums.sohc4.net/index.php/topic,138625.0.html

Offline Derby City

  • Full Member
  • *
  • Posts: 78
Re: What does it need?
« Reply #21 on: May 15, 2009, 07:20:42 PM »
My first impression was that something needed to be done with the seat.  I think once the handlebars are lowered, lowering someting in the back is needed to balance things out.

That mudflap on the front fender looks grandma-ish to me.  I'd lose it, or make a sissy bar out of it.

Otherwise, I agree that it needs more riding.
Logged
1974 CB 550

Offline Industrial Cafe

  • Like a well oiled
  • Really Old Timer ...
  • *******
  • Posts: 6,372
  • [Brian] I've got something to say about that!
    • Undead Asphalt
Re: What does it need?
« Reply #22 on: May 15, 2009, 07:28:16 PM »
ok, I don't feel like reading so I'll just tell ya what I think.

you need one bar end mirror, (stock mirrors are like bug antennae, get the seat reupholstered with a nice cafe hump, and that's about it, the bike looks nice man
Logged
everything I say is pure speculation and
I have no idea what I'm talking about  ._.

                                    Marla              .:71CB750:.CAFE
Pages: [1]   Go Up
« previous next »