Author Topic: Where to Start  (Read 8372 times)

0 Members and 1 Guest are viewing this topic.

Offline danielcgordon

  • Full Member
  • *
  • Posts: 61
  • Loving to Learn
Where to Start
« on: July 15, 2009, 11:50:50 PM »
I'm not sure as to the why or how I fell in love with this bike, yes bikes like this but this one in paticular!
I'm starting with NO knowledge, little tools, no resources (before here)...the hardest part is catching onto the lingo...
Just a boy and the love of this bike



It started and ran until the first day I had it and fried the electrical









OOOOOOPS!!! Ya I get really hard on myself when I make rookie mistakes, being a rookie or not.

I knew I had to work with the carbs when getting it......







A little better? Thanks only to you!!!



I can still see some oxidation in the third one.






The basic cosmetic work I was planning went into some parts I wasn't.

I'll keep an up-date
« Last Edit: July 15, 2009, 11:54:21 PM by danielcgordon »
Dan

Offline mcpuffett

  • Master
  • *****
  • Posts: 2,354
Re: Where to Start
« Reply #1 on: July 16, 2009, 02:46:25 AM »
Looking good so far all the answers you need to your questions are right here on this forum so don't be afraid to ask  ;) you should have a really nice bike at the end with a little patience and time  :), cheers Mick.
Honda CB750 KO 1970,   Honda VTX 1300 2006, Lancaster England.

Offline danielcgordon

  • Full Member
  • *
  • Posts: 61
  • Loving to Learn
Re: Where to Start
« Reply #2 on: July 16, 2009, 05:49:30 AM »
Thanks. It wouldn't have come this far without you guys and this site!
Dan

Offline Ecosse

  • Really Old Timer ...
  • *******
  • Posts: 5,051
  • Member #4139
    • My 550 walk around video
Re: Where to Start
« Reply #3 on: July 16, 2009, 12:20:03 PM »
you sentimental fool.  ;D

high marks for bringing an unloved animal from the dead.
1974 CB550K     
                 
            Help stop TORTURE and SLAUGHTER of cats, dogs, and other kept animals.                                                  www.animalsasia.org

                                  Your 1%er name

                                                A WORTHY EFFORT: http://www.honorflight.org.

Offline danielcgordon

  • Full Member
  • *
  • Posts: 61
  • Loving to Learn
Re: Where to Start
« Reply #4 on: July 16, 2009, 12:27:07 PM »
It has much love...besides a little cosmetic work it was running all season last year! Obviously the PO neglected the carbs but he had some fun on it!

$300?

Ya that's well worth it...even after I toasted the electrical.
Dan

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Re: Where to Start
« Reply #5 on: July 16, 2009, 03:30:43 PM »
Welcome Dan...now you know what the vintage cycle bug is all about.  Just something about these things that keep calling you.  I bet this will not be your last either.  Everyone on this site can see things in these unrestored bikes that most people can not see...the potential to be a real keeper.  Great to see what you found and it looks pretty complete.  You will gradually become very educated on your project.  Those carbs look pretty nice and I bet even surprised you.  The wiring you can deal with and that first ride will be cool.  Keep us informed.
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline Tim in Ohio

  • So I got that goin' for me, which is nice.
  • Hot Shot
  • ***
  • Posts: 381
Re: Where to Start
« Reply #6 on: July 16, 2009, 03:40:44 PM »
Dan,
Congrats on your purchase and your start into the hobby.  You'll get alot of help here.  Forgive me for saying it, but your bike looks like ass, but I'm sure these fine fellows and some hard work on your part will change that.
Cheers!
Tim
1973 Honda CB350  Four

Check out my CB350F resto project...  watch a complete moron build a bike in front of your very eyes!: http://forums.sohc4.net/index.php?topic=38903.0

Offline Inkscars

  • grumpiness comparable to an
  • Old Timer
  • ******
  • Posts: 3,344
  • I have a box. I'm used to being ignored.
Re: Where to Start
« Reply #7 on: July 16, 2009, 03:58:01 PM »
Woooo hooo! Rusty Crusty and waiting for someone to bring her back to life.
Look forward to seeing her cleaned up!
And who the hell named us; click-click-click-click-click-click

81 Hardly Davisson

Offline noahspop

  • Hot Shot
  • ***
  • Posts: 403
  • 1977 CB750F2
Re: Where to Start
« Reply #8 on: July 16, 2009, 04:10:14 PM »
ah, mother nature was not friendly to that one.
i look forward to seeing the progress.

Offline manjisann

  • Hazardous Chemical Inhalation
  • Master
  • *****
  • Posts: 1,828
Re: Where to Start
« Reply #9 on: July 16, 2009, 05:05:41 PM »
Eh, the uglier the start the greater the sense of satisfaction when you are done (ok, no such thing, but when it looks tons better  ;D )

Before last year I knew nothing about motorcycles, bought my first one, screwed up a lot, learned a lot, and now I am redoing one from the ground up sorta. And the neighbors keep bringing their motorcycles by when they have problems so I earn a bit of dough on the side, of course it all goes back into the bike or tools for the bike  :D

Look forward to watching your progress!

Brandon
Sure it's for sale! How much you ask?? Well, how much are you willing to pay??? Now triple it, that's the price!

1973 CB500 K2 - Sold the bike and bought a Mig, Miss the bike, Love the Mig :D
1980 CB650 Custom
1971 CB500 Frame 650 engine: Project

Trip and General Ramblings blog: manjisann.blogspot.com

Offline DollarBill

  • Hot Shot
  • ***
  • Posts: 335
Re: Where to Start
« Reply #10 on: July 16, 2009, 06:46:09 PM »
Sorta like the first time I saw an old trashed out 67 GTO in a farmers field.  I still want and love that car but he would never sell it....sure there were nicer ones out there but I WANTED THAT ONE!!!!

Good luck with your build!
1975 CB750F Project Yellow Jacket - CBR600rr Swinger GSXR 600 Forks
1955 BMW R25/3, 1966 Honda CA160, 1975 CB400f, 1975 CB550, 1976 CB550

Offline danielcgordon

  • Full Member
  • *
  • Posts: 61
  • Loving to Learn
Re: Where to Start
« Reply #11 on: July 16, 2009, 09:14:47 PM »
Sorta like the first time I saw an old trashed out 67 GTO in a farmers field.  I still want and love that car but he would never sell it....sure there were nicer ones out there but I WANTED THAT ONE!!!!

Good luck with your build!

I totally understand that! I saw this bike then decided I was serious about buying one, shopped (Craigslist mostly) and ended up always going back here. It drove my girlfriend nuts for 2 straight weeks!!

Forgive me for saying it, but your bike looks like ass, but I'm sure these fine fellows and some hard work on your part will change that.
Cheers!
Tim

A paint job, new seat and some chrome cleaning and it'll look at least presentable wouldn't you agree?
Dan

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Re: Where to Start
« Reply #12 on: July 17, 2009, 06:38:25 AM »
Dan...I agree...paint, seat, chrome cleaning and regular degreasing it will look real nice.  If you have the $$$ opt for replating chrome rather than buying NOS chrome if it is salvageable.  It is no secret Honda OEM chrome is poor quality.  
The oxidation on the side engine covers can be cleaned and polished to look new again.  Just get yourself a nice buffer from Sears and some red, green and white rouge.  Below is a pic of mine from my 1970 KO.  There is some nice stuff on this board about polishing technique.  That will be down the road for you.  Last, do not use a pressure washer on the bike.  You will open up more problems if you do that.  Looking forward to your project results.  Let your girl know if she can't find you...your with your bike... ;D  Click the pic to enlarge.
« Last Edit: July 17, 2009, 06:46:46 AM by Johnie »
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline ev0lve

  • Master
  • *****
  • Posts: 1,930
Re: Where to Start
« Reply #13 on: July 17, 2009, 07:09:51 AM »
You, sir, are a brave man. These guys and the forum are the poop so you're in good hands technically. Really looking forward to watching it happen!

Has anyone mentioned purchasing an impact driver yet?  ;)

Offline noahspop

  • Hot Shot
  • ***
  • Posts: 403
  • 1977 CB750F2
Re: Where to Start
« Reply #14 on: July 17, 2009, 08:32:38 AM »
You, sir, are a brave man. These guys and the forum are the poop so you're in good hands technically. Really looking forward to watching it happen!

Has anyone mentioned purchasing an impact driver yet?  ;)

impact driver!!!!!!!
a must for sure.
+100

Offline Johnie

  • Really Old Timer ...
  • *******
  • Posts: 8,609
Re: Where to Start
« Reply #15 on: July 17, 2009, 08:54:52 AM »
For sure Dan, you will need an impact driver to get the screws off the side engine covers if you take them off for polishing or to change leaking gaskets.
Below is what it looks like...
1970 CB750K0 - Candy Ruby Red
1973 CB750K3 - Candy Bacchus Olive or Sunflake Orange
1970 Chevy Chevelle SS396 - Cortez Silver
1976 GL1000 Sulphur Yellow

Oshkosh, WI  USA

Offline danielcgordon

  • Full Member
  • *
  • Posts: 61
  • Loving to Learn
Re: Where to Start
« Reply #16 on: September 02, 2009, 09:36:29 AM »
LET THERE BE LIGHT!

Finally the electrical is fixed!! Thanks to a friendly face from the forum.

I pride myself in meeting the absolute best people in life, I'm not sure why they find me but they always do. Since the beginning of the summer I've come to learn that people with bikes are probably the most helpful group of people I've met to date.

Now I'm just looking for coils and intake boots and he should run!
Dan

Offline Ecosse

  • Really Old Timer ...
  • *******
  • Posts: 5,051
  • Member #4139
    • My 550 walk around video
Re: Where to Start
« Reply #17 on: September 02, 2009, 08:24:32 PM »
glad to hear it!
1974 CB550K     
                 
            Help stop TORTURE and SLAUGHTER of cats, dogs, and other kept animals.                                                  www.animalsasia.org

                                  Your 1%er name

                                                A WORTHY EFFORT: http://www.honorflight.org.

Offline HedNut

  • Underwater Basket Weaving
  • Expert
  • ****
  • Posts: 844
  • CB750...A Two-wheeled hellcat from Planet Kickass
Re: Where to Start
« Reply #18 on: September 04, 2009, 07:00:03 AM »
Wow.. this looks like one fantastic project!!! I look very forward to hear you say....IT RUNS!! Enjoy it to the fullest!! I'm new and learning a lot here too.  AWESOME Forum....AWESOME people!!

Offline Thor's Hammer!

  • Enthusiast
  • **
  • Posts: 139
Re: Where to Start
« Reply #19 on: September 04, 2009, 08:42:54 PM »
Any Updates?  Any new pics?
1978 Honda CB750F : 2005 Kawasaki ZRX1200

Offline GoatBaSS

  • Could someone find an
  • Expert
  • ****
  • Posts: 760
  • To weird to live, to rare to die.
Re: Where to Start
« Reply #20 on: September 11, 2009, 01:13:41 AM »
Show the LOVE!!!! Spill the info n deets. Reminds me of my 75$ Cb500T.
Leethal # 3046?
1972 CB750K/900CC Red Headed Dunstall, 1975CB750FSS Gone BNF: 1974CB500T, 1976CB750K X 2

Offline danielcgordon

  • Full Member
  • *
  • Posts: 61
  • Loving to Learn
Re: Where to Start
« Reply #21 on: September 11, 2009, 06:54:11 AM »
No big updates as far a picts are concerned. Now its not getting spark, so I have a new set of coils to put on!

I just really hope he'll start this season!?! Living in Mi its getting close to the end. 

I think about what he's going to look like on a daily basis! lo.
Dan

cb750gearhead

  • Guest
Re: Where to Start
« Reply #22 on: September 12, 2009, 05:19:43 AM »
can't wait to see her all done

Offline MJL

  • Don't listen to me, I'm no
  • Expert
  • ****
  • Posts: 1,162
  • Oh hell, what's one more bike?
Re: Where to Start
« Reply #23 on: September 13, 2009, 10:23:18 PM »
I'd ride it as is.
No matter how fast or how far I rode, I couldn't leave her memory behind.

Offline danielcgordon

  • Full Member
  • *
  • Posts: 61
  • Loving to Learn
Re: Where to Start
« Reply #24 on: September 14, 2009, 05:41:37 AM »
If I lived on top of  a hill I just might push him and jump on for the experience...but I live on a flat street! Lol
Dan