Author Topic: Velocity stacks???? (Read 43950 times)

yellowbirdrs · « **on:** November 30, 2009, 12:23:26 AM »

Where can I find some? 70-76k 40mm OD carb.
Any help is much appreciated!

voxonda · « **Reply #1 on:** November 30, 2009, 01:36:25 AM »

http://www.steeldragonperformance.com/

These look great!

rob

wannabridin · « **Reply #2 on:** November 30, 2009, 09:58:04 AM »

the site says they come with screens, so would these be safe enough to run on a near daily driver?? or should i stick with looking for some pods?

i had an idea that if you could attach a filter material to the outside of the screen it would help out a lot more for filtration and wouldn't get sucked into the engine...

yellowbirdrs · « **Reply #3 on:** November 30, 2009, 10:29:18 AM »

Quote from: voxonda on November 30, 2009, 01:36:25 AM

http://www.steeldragonperformance.com/

These look great!

rob

THX! They look good.

Quote from: wannabridin on November 30, 2009, 09:58:04 AM

the site says they come with screens, so would these be safe enough to run on a near daily driver?? or should i stick with looking for some pods?

i had an idea that if you could attach a filter material to the outside of the screen it would help out a lot more for filtration and wouldn't get sucked into the engine...

Yes, you need to find the way to use a thin oily foam for daily drive or find some stacks screens

mlinder · « **Reply #4 on:** November 30, 2009, 11:17:02 AM »

I've run stacks on daily riders with nothing more than grasshopper-stoppers, never really had an issue. Not to say that issues weren't a possibility, just never had any.

Screens are prolly smart

beveldrive · « **Reply #5 on:** December 01, 2009, 10:06:04 AM »

In my opinion, it depends on what you’re trying to gain. If it’s performance, then your stack really needs to have a fully radiused edge, and deff no screen, grid or bits of foam messing up the flow. But if its for show, then any will do.
Best compromise for filtration would prob be a foam 'sock' type.

yellowbirdrs · « **Reply #6 on:** December 01, 2009, 02:41:04 PM »

just order some Honda CB750 Bell velocity stacks from Speed Dragon good customer service so far let's see how the stack shine and fit.

wannabridin · « **Reply #7 on:** December 02, 2009, 10:45:24 AM »

look good!! i can't wait to get a set for myself!!!

yellowbirdrs · « **Reply #8 on:** December 02, 2009, 12:22:02 PM »

Yes they look good I'll post some photos when I receive them.

Mike Mentges was the man who process my order fast he ship them the same day I paid for.
stacks are $62.00 plus shipping looks like a good deal to me.

acteg · « **Reply #9 on:** December 04, 2009, 06:32:28 AM »

I ordered a set for my 550 as well. I'll let you guys know how they turn out.

Aaron Richard · « **Reply #10 on:** December 04, 2009, 06:55:39 AM »

keep us posted on the 550 versions. Were they the same price as the 750?

Quote from: acteg on December 04, 2009, 06:32:28 AM

I ordered a set for my 550 as well. I'll let you guys know how they turn out.

SOCALCRICKETT · « **Reply #11 on:** December 06, 2009, 02:26:12 AM »

What about just cutting some foam out of another aircleaner and putting it inside the stack to use as a filter?

mystic_1 · « **Reply #12 on:** December 06, 2009, 08:09:52 AM »

That would defeat the functional reason for velocity stacks, which is to boost the amount of air being drawn into the carb. Put too much (ie any) restriction or turbulence into them and they become nothing more than poorly tuned cosmetic addons.

mystic_1

Sam Green Racing · « **Reply #13 on:** December 06, 2009, 02:10:36 PM »

Plus the engine would just suck the foam in.

Sam.

mcuozzo · « **Reply #14 on:** December 06, 2009, 02:25:03 PM »

Here's a thread from the for sale section (imagine that?) with more pics and info. Pics in there are of the set I got for the 77-78K carbs. They fit great, no problems.

Matt

http://forums.sohc4.net/index.php?topic=62008.msg675783#msg675783

SOCALCRICKETT · « **Reply #15 on:** December 07, 2009, 03:42:24 AM »

Quote from: SamCB750A on December 06, 2009, 02:10:36 PM

Plus the engine would just suck the foam in.

Sam.

Thats what I was thinking would happen. $:-\$

Is there any real way to put a filter on them?

acteg · « **Reply #16 on:** December 07, 2009, 05:56:22 AM »

Quote from: shiznits75 on December 04, 2009, 06:55:39 AM

keep us posted on the 550 versions. Were they the same price as the 750?

Quote from: acteg on December 04, 2009, 06:32:28 AM
I ordered a set for my 550 as well. I'll let you guys know how they turn out.

yes same price

Sam Green Racing · « **Reply #17 on:** December 07, 2009, 07:10:42 AM »

Quote from: SOCALCRICKETT on December 07, 2009, 03:42:24 AM

Quote from: SamCB750A on December 06, 2009, 02:10:36 PM
Plus the engine would just suck the foam in.

Sam.

Thats what I was thinking would happen. $:-\$

Is there any real way to put a filter on them?

Putting any sort of fillter on them other than a mesh screen defeats the object of having them on in the first place.
It's allready been said a few posts back by Mystic_1 You either have carbs with stacks (maximum flow) carbs with pods (slightly restricted flow) or carbs with filters (stock restricted flow), there's no in between, end of story.
Is you want to look cool, buy a pair of sun shades and a Sam Green Tee shirt

Sam.

voxonda · « **Reply #18 on:** December 07, 2009, 07:18:14 AM »

Even a mesh screen blocks about 40% of the oriface.

Sam Green Racing · « **Reply #19 on:** December 07, 2009, 07:36:04 AM »

But dose stop stones, house bricks and large lumps of concrete getting stuck between your valves and valve seats Rob.

Sam.

beveldrive · « **Reply #20 on:** December 07, 2009, 09:13:30 AM »

As I suggested a few back, a foam sock is a good compromise when it comes to filtering rampipes. In my experience better than a 'pod'.

But agree that the best for max flow is 'open'.
You say there is no in between, and I know what you mean, but the optimum for a filtered induction has to be the airbox and remote filter.

mystic_1 · « **Reply #21 on:** December 07, 2009, 09:16:44 AM »

That's a pretty damn cool airbox. Tell us more!

mystic_1

beveldrive · « **Reply #22 on:** December 07, 2009, 10:57:43 AM »

Yeah neat isn't it.
I found it when Googling airbox or something. It's a Huyabusa installation for kit car use (Westfield/Caterham).

I've just got a new set of CRs for my K7 project, and I'm considering the alternatives!

SOCALCRICKETT · « **Reply #23 on:** December 07, 2009, 07:49:13 PM »

Is you want to look cool, buy a pair of sun shades and a Sam Green Tee shirt

Sam.

[/quote]

Haha, Ill leave that part to you!!

Sam Green Racing · « **Reply #24 on:** December 07, 2009, 08:06:37 PM »

Quote from: SOCALCRICKETT on December 07, 2009, 07:49:13 PM

Is you want to look cool, buy a pair of sun shades and a Sam Green Tee shirt

Sam.

Haha, Ill leave that part to you!!
[/quote]

Hey Socal, did I not explain that there's copyright on my postings, now where's my lawyers number

Sam.

We do have a few Tee shirts left if you're intrested

News:

Author Topic: Velocity stacks???? (Read 43950 times)

SOCALCRICKETT

SOCALCRICKETT

SOCALCRICKETT