Author Topic: Cafe blasphemy (Read 4172 times)

SHORTROUND · « **on:** July 02, 2010, 10:27:13 AM »

i know its cafe racer blasphemy but i just couldn't help it. I'm getting tires of paying $50 for point covers.

bikerbart · « **Reply #1 on:** July 02, 2010, 10:31:03 AM »

is that,god forbid,carbon fiber???

sangyo soichiro · « **Reply #2 on:** July 02, 2010, 10:31:16 AM »

I guess I don't know what I'm looking at.

What is it that has your soul in peril?

HedNut · « **Reply #3 on:** July 02, 2010, 10:34:32 AM »

why blasphemy!?... this is cool!.. I take it you're making your own carbon fiber covers??

I love it...and I'm sure Cafe loves the CF... that's what I have on my KTM dirt slinger...and I call it SPEED EQUIPMENT... GOOD STUFF! I was under the assumption that shavin' pounds n' going fast was what CAFE RACIN' is all about! Keep us posted!

Little_Horse · « **Reply #4 on:** July 02, 2010, 11:51:00 AM »

I made a carbon fiber exhaust can for my cafe. If the material had been around back then it would have been used and the way I see a true cafe should be done with materials and parts that are free or cheap to keep the correct essence. Built by hand on a tight budget.

MilehighCB · « **Reply #5 on:** July 02, 2010, 01:41:21 PM »

Sweet Nectar of the Gods! Gotta love carbon fiber!
Now if you can fab me up some nifty covers with vents for my Ultra Modern (not period correct for cafe)but overheating optic ignition sensor, that would be great!!

traveler · « **Reply #6 on:** July 02, 2010, 06:24:54 PM »

VINTAGE cafe....yeah a problem.

In the TRUE spirit of cafe....of course! USE IT!

Cafe racers are all about mixing and matching the best of the best. Make~model~year....who cares......put it together and do the ton!

In short, go for it.

~Joe

geniusanthony · « **Reply #7 on:** July 02, 2010, 07:44:10 PM »

I have worked with fiberglass but am completely clueless as to how to mold a CF part. Would you give me a short spiel on how you made the mold and layed up the part.

traveler · « **Reply #8 on:** July 02, 2010, 07:54:38 PM »

ME?

My gas tank and seat are made of aluminum. I has Sean at Roc City Cafe do mine. Everything else is me.

~Joe

SHORTROUND · « **Reply #9 on:** July 06, 2010, 02:02:03 PM »

a couple of pics of the finished product.

SHORTROUND · « **Reply #10 on:** July 06, 2010, 02:10:08 PM »

a picture of the stator side.

Magpie · « **Reply #11 on:** July 06, 2010, 02:13:00 PM »

Looks great!!!
Cliff.

Flying J · « **Reply #12 on:** July 06, 2010, 02:39:28 PM »

Ok show off. How much?

HedNut · « **Reply #13 on:** July 07, 2010, 05:42:30 AM »

I second that...how much!? I'm sure you could off-load a bunch on this forum. Too cool! Excellent JOB!!

Shoeboxjoe · « **Reply #14 on:** July 07, 2010, 06:50:30 AM »

Paint it blasphemer!

mysta2 · « **Reply #15 on:** July 07, 2010, 07:31:30 AM »

Did you wrap them or make new ones?

SHORTROUND · « **Reply #16 on:** July 07, 2010, 09:17:22 AM »

Quote from: mysta2 on July 07, 2010, 07:31:30 AM

Did you wrap them or make new ones?

the points cover in the picture i just overlaid the original part in carbon, them popped it out. i curt a new gasket out of 3/32 to help fill in the slightly larger piece. it fits good but i made a mold to vacuum form the next one. the stator cover i used the original part as the mold since it was just a piece of domed aluminum. i didn't feel likr being bothered for a cosmetic piece. i'm currently laying up a front and rear fender.

Zaipai · « **Reply #17 on:** July 07, 2010, 09:39:22 AM »

Short that is awesome work.. Any time you can shave weight that is a good thing.

.: Scott :.

mysta2 · « **Reply #18 on:** July 07, 2010, 10:21:27 AM »

Cool, how does bolting it down not crush it? Are you using a poly resin or epoxy?

Alan F. · « **Reply #19 on:** July 08, 2010, 03:36:46 PM »

Yup, put them into production.

cadaver · « **Reply #20 on:** July 08, 2010, 07:25:49 PM »

yes I love the look .. I have a carbon fiber tank and seat and would like to have a pair, how much ?

SHORTROUND · « **Reply #21 on:** July 09, 2010, 11:18:28 AM »

Quote from: mysta2 on July 07, 2010, 10:21:27 AM

Cool, how does bolting it down not crush it? Are you using a poly resin or epoxy?

they are epoxy resin. if you over-tighten them you will crack them. i used some 1104 bond to hold the gasket in place then snugged it down. i'll have to use some thread lock on the bolts to make sure they don't come out. the thicker gasket should keep the points dry. i wasn't very fond of the one in the gasket kit to begin with.

SHORTROUND · « **Reply #22 on:** July 09, 2010, 11:30:37 AM »

Quote from: cadaver on July 08, 2010, 07:25:49 PM

yes I love the look .. I have a carbon fiber tank and seat and would like to have a pair, how much ?

the stator side is made for a 350 Four. i'm not sure if it will work with a 400 500 or 550. it's not going to work with a 750. but the points cover will fit any SOHC honda four. they're all the same diameter, the only difference is the clock position of the bolts. i hadn't really thought about selling them, do you want raw carbon fiber or do you want them with urethane clear on them? the ones in the pic are cleared very glossy with a lot of depth.

Flying J · « **Reply #23 on:** July 09, 2010, 03:12:11 PM »

I would take a raw one so I could paint on it a little and then clear it.

turninwheels · « **Reply #24 on:** July 10, 2010, 12:34:11 PM »

That is a cool idea...

News:

Author Topic: Cafe blasphemy (Read 4172 times)

traveler

geniusanthony

traveler