« previous next »
Pages: 1 [2]   Go Down

Author Topic: Black Mamba A 1967 CB450  (Read 7229 times)

0 Members and 2 Guests are viewing this topic.

Offline Killer Canary

  • Master
  • *****
  • Posts: 1,805
  • Typical Bran Muffin
Re: Black Mamba A 1967 CB450
« Reply #25 on: January 30, 2012, 08:16:39 PM »
That big alloy lump is what caught my eye when I first saw a 450. I've only ever seen one in the flesh. Life in Saskatchewan.
Logged
If it's worth doing at all it's worth over-doing.
Honda MT250, CB400F, CB450K, CB550, GL500, CBR929
Kawi GPz900, H1

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: Black Mamba A 1967 CB450
« Reply #26 on: January 31, 2012, 12:03:18 AM »
Just take your time Mark on this CB450. It is like gold when finished.
Logged

Offline wedoo2

  • Hot Shot
  • ***
  • Posts: 441
Re: Black Mamba A 1967 CB450
« Reply #27 on: January 31, 2012, 04:53:02 AM »
I LMAO every time I read a spelling correction blast.

Really enjoying your build because that bike was as bad as any project that I have read about here,  Can't believe that the frame still holds things off the ground.  I doubt that I would have even seriously considered trying, even if it was free.  I follow with my prayers.

I also agree with keeping that 900 in stock colors.  My opinion, but it was the best color scheme ever; my dream bike.  If I had one to restore I could never sell it when it was done.
Logged
Some days the sun is too loud.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: Black Mamba A 1967 CB450
« Reply #28 on: January 31, 2012, 02:00:56 PM »
Quote from: wedoo2 on January 31, 2012, 04:53:02 AM
I LMAO every time I read a spelling correction blast.


Lucky has been doing it all over the forum since joining, i found it funny when he used duel out of context, my reply was a bit tongue in cheek...... I think, being an international forum the English language has different interpretations everywhere, and considering that the US has "altered" the Queens English i found it ironic that Lucky was correcting everyone....Nothing untoward intended.... ;D ;)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Markcb750

  • Guest
Re: Black Mamba A 1967 CB450
« Reply #29 on: January 31, 2012, 02:49:31 PM »
Weedo

Which one black or silver? 

I guess I am trying to recapture my youth...here is my 1971 CB500 in 1974.
Logged

Markcb750

  • Guest
Re: Black Mamba A 1967 CB450
« Reply #30 on: March 16, 2012, 07:27:06 PM »
I picked up the frame, motor brackets, toolbox, and side stand today.  Thanks to James at CTI for helping me out.

before & after for comparison.  Note the dust on the neck already!
Logged

Offline Greggo

  • Somebody's
  • Old Timer
  • ******
  • Posts: 4,164
  • Helmets Save Lives. Period.
Re: Black Mamba A 1967 CB450
« Reply #31 on: March 16, 2012, 08:15:39 PM »
Looks really good Mark.
Logged

Markcb750

  • Guest
Re: Black Mamba A 1967 CB450
« Reply #32 on: February 02, 2014, 01:41:45 PM »
Its Back!!

I procrastinated for a long time, most of two years in fact.

Finally decided I needed something to kick start my enthusiasm, and reduce my anxiety about paying far more than I wanted to for parts; Mamba needed a lot of parts to be done well, so she is now going to be a Cafe custom.

Already have the CBR250R front end on, working on extending the swingarm 30mm to accommodate the CBR250R rear wheel & brake system.

« Last Edit: February 02, 2014, 03:32:43 PM by Markcb750 »
Logged

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: Black Mamba A 1967 CB450
« Reply #33 on: February 02, 2014, 04:12:24 PM »
Quote from: Markcb750 on February 02, 2014, 01:41:45 PM
Its Back!!

I procrastinated for a long time, most of two years in fact.

Finally decided I needed something to kick start my enthusiasm, and reduce my anxiety about paying far more than I wanted to for parts; Mamba needed a lot of parts to be done well, so she is now going to be a Cafe custom.

Already have the CBR250R front end on, working on extending the swingarm 30mm to accommodate the CBR250R rear wheel & brake system.






Probably a good idea as early 450 parts are hard to find and more than expensive,  plus Honda 450s are a great cafe foundation...Larry
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,309
  • Central Texas
Re: Black Mamba A 1967 CB450
« Reply #34 on: February 06, 2014, 08:47:07 PM »
Mamba is back....
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Black Mamba A 1967 CB450
« Reply #35 on: February 06, 2014, 11:31:40 PM »
Lossa Engineering recently did a really cool 450, with ammo cans as panniers.  You might find some ideas from it.
 http://www.lossaengineering.com/2013/04/18/1970-honda-cl450/
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Markcb750

  • Guest
Re: Black Mamba A 1967 CB450
« Reply #36 on: February 07, 2014, 02:41:22 AM »
That is a CL450. Nice job making a adventure restro-mod of one. 

Thanks
« Last Edit: February 07, 2014, 07:45:28 AM by Markcb750 »
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Black Mamba A 1967 CB450
« Reply #37 on: February 07, 2014, 07:21:44 AM »
Looking forward to see what you do.  The 450 has a great motor.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Markcb750

  • Guest
Re: Black Mamba A 1967 CB450
« Reply #38 on: February 13, 2014, 02:34:44 PM »
Got the front end on, spent the last two snow days polishing motor parts.

Looks like a little top end work is needed, number 1 cylinder will not hold fluid. Drove in the snow yesterday to meet a guy in a machine shop who rumor had it possessed a reworked head from a customer that walked away years ago.  It was from a mid 80's SOHC 450, C'est la Vie.

All the lower covers need to be replaced due to damage.  I have found output shaft cover, still looking at the other two.

** found alternator cover last night!
« Last Edit: February 14, 2014, 03:34:59 AM by Markcb750 »
Logged

Markcb750

  • Guest
Re: Black Mamba A 1967 CB450
« Reply #39 on: March 22, 2014, 06:40:08 PM »
The swing arm has been cut down and temperately installed in the frame to check how it all fits together.

I had to cut 30mm from the swing arm pivot OAL as you can see marked on the last photo. 

It all fits and it looks like i can adapt the monoshock into the existing frame structure.  The front shock pivot will be secured to the existing center stand with an adapter and two links. the Upper shock mount sits in an area braced by the battery box, the rear triangle and a pair of diagonal braces that tie the frame down tube to the rear triangle.  I think it is going to work out very well.

The 250RR arm adds about 110mm to the wheelbase.  the photo sure makes this clear.


« Last Edit: March 23, 2014, 06:06:45 AM by Markcb750 »
Logged
Pages: 1 [2]   Go Up
« previous next »