* Project JUnK Update 8/23/06 *
I had another post going , but I wanted to update this one
On a freak accident , I used the wrong paint for a "touch-up" , and ended up with this --->
At first I wasn't a fan , but the gloss has grown on me. Over the winter the tank & covers are getting pulled and will have a
pro gloss black paintjob done, along with some kickass Honda emblems I got off Ebay. Gonna look tight !
In other news I finally got around to wrapping my 4 into 1.
I used the wrap from the old 4 into 2, and now if that isn't recycling I don't know what is
I soaked the wrap in some water to get it's shape back, then wrapped each primary tube as tight as I could.
I would of went farther down, but because the tubes get so tight next to each other, it is nearly impossible to wrap them all the way down.
The way it is now gives off a more industrial/raw/un finished look I think ,which is what my bike is all about (I think?)
After I was done, I took some high temp bar-b-q paint and sprayed the wrap down while the bike was running, and after it had cooled to insure a good ad hersion of the paint. Looks brand new - and quite good in my opinion.
Next on the list is to re-weld the cannon on the 4 into 1 so it "hugs" the bike alittle more, new Tach/Top triple tree setup, and some
other things that I cant mention at the momment
More updates to come , well , as they come... 
