Author Topic: How much is a "sandcast" engine worth? !!!UPDATE!!! dog-pile begins on pg 12. (Read 55380 times)

Stev-o · « **Reply #175 on:** October 19, 2011, 06:19:58 PM »

I don't think excerpt is lying, I think the old man is full of crapola!

The story is getting better, he has a Kaw drag bike too?!!

Duke McDukiedook · « **Reply #176 on:** October 19, 2011, 06:26:24 PM »

I think Rupaul might be 'tucked away' in his barn too!

Stev-o · « **Reply #177 on:** October 19, 2011, 06:56:51 PM »

And Liberace's piano too?!!

754 · « **Reply #178 on:** October 19, 2011, 10:37:52 PM »

Maybe Jimmy Hoffa is hanging on to the stuff for him..!!

... Sorry.but after the above.. I just could not resist..

phil71 · « **Reply #179 on:** October 19, 2011, 10:54:36 PM »

when you get to the old man's place, ask him who really killed Kennedy.

trueblue · « **Reply #180 on:** October 20, 2011, 12:14:52 AM »

Quote from: phil71 on October 19, 2011, 10:54:36 PM

when you get to the old man's place, ask him who really killed Kennedy.

I wouldn't he may still have the gun

Stev-o · « **Reply #181 on:** October 20, 2011, 06:46:08 AM »

Maybe he shot Ghadaffi?!

flybox1 · « **Reply #182 on:** October 20, 2011, 07:57:42 AM »

DB Cooper's been collecting sandcast parts with all that cashmoney

Rigid · « **Reply #183 on:** October 20, 2011, 08:13:06 AM »

A Cooper vane (also sometimes called a "Dan Cooper switch" or "D.B. Cooper device") is a mechanical aerodynamic wedge that prevents the ventral airstair of an aircraft from being lowered in flight.

bgfootball67 · « **Reply #184 on:** October 21, 2011, 06:42:07 PM »

http://forums.sohc4.net/index.php?topic=73094.0

It is actually a 72, she is sitting at the side of my garage at the moment, I have 2 bikes to sell (GS 1000 78 and a 75 CB750F), working on a CB1100F and a Guzzi...

excerpt · « **Reply #185 on:** October 21, 2011, 07:18:15 PM »

Quote from: bgfootball67 on October 21, 2011, 06:42:07 PM

http://forums.sohc4.net/index.php?topic=73094.0

It is actually a 72, she is sitting at the side of my garage at the moment, I have 2 bikes to sell (GS 1000 78 and a 75 CB750F), working on a CB1100F and a Guzzi...

nope. Nice find though!

754 · « **Reply #186 on:** October 21, 2011, 07:46:40 PM »

excerpt, it appears that in front of all of us he is offereing that to you for 800 bux!!

I would be all over that...tout suite...

excerpt · « **Reply #187 on:** October 27, 2011, 02:41:04 PM »

Just called the guy. He said he is about to get his schedule approved, and it looks like he will be off most of next week.

He is going to call me as soon as he finds out (next day or two), and we will meet up.

It's looking like this may take place Wednesday.

Duke McDukiedook · « **Reply #188 on:** October 27, 2011, 02:56:30 PM »

Oh boy, I was wondering out loud about this one...

Saaaaaaaaaandcaaaaaaaaaaaast- BE REAL!!!

markb · « **Reply #189 on:** October 27, 2011, 03:03:46 PM »

Good luck!!!

liPPy · « **Reply #190 on:** October 27, 2011, 04:27:19 PM »

Could the watched pot that never boils finally be showing some steam...?!!

Stev-o · « **Reply #191 on:** October 27, 2011, 05:07:33 PM »

It's warming up........

phil71 · « **Reply #192 on:** October 27, 2011, 08:11:18 PM »

these sandcasts were probably the backup motors for Dick Mann's CRs. One may have even been on the first apollo mission.

Emokid · « **Reply #193 on:** October 27, 2011, 09:09:07 PM »

My fingers are crossed for you pal

Greggo · « **Reply #194 on:** October 27, 2011, 10:17:09 PM »

Who's taking bets on whether the schedule gets approved? What kinda odds we got going here?

Rigid · « **Reply #195 on:** October 28, 2011, 03:01:37 AM »

Like sandcasts through an hour glass, so are the days of this thread...........

dave500 · « **Reply #196 on:** October 28, 2011, 03:28:52 AM »

only kcc would post something like that.

Tews19 · « **Reply #197 on:** October 28, 2011, 07:20:54 AM »

Man Rigid, I haven't been on the site long but you remind me of a former member who shared a lot of valuable information to all. Sad part is he got up and left the site when he was criticized. From the avatar he had , he reminded me of Mike the mouth Matusow..

Rigid · « **Reply #198 on:** October 28, 2011, 07:36:36 AM »

Quote from: dave500 on October 28, 2011, 03:28:52 AM

only kcc would post something like that.

I'll take that as a compliment. I did a little research on here, the web, and youtube. It looks like he is a pretty decent wrench and helpful to others. His new Youtube videos about valve work were right on. So, thanks.

thrutheframe · « **Reply #199 on:** October 28, 2011, 07:48:33 AM »

My money is on this all being real but not quite sandcast. That being said I hope it's all real and that homey gets a sweet deal on some SC motors and an aluminum frame.

News:

Author Topic: How much is a "sandcast" engine worth? !!!UPDATE!!! dog-pile begins on pg 12. (Read 55380 times)