« previous next »
Pages: 1 2 3 [4]   Go Down

Author Topic: '77 CB750 K7 café - Here I go again  (Read 17210 times)

0 Members and 1 Guest are viewing this topic.

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 café - Here I go again
« Reply #75 on: September 08, 2016, 11:30:38 AM »
I put some pics later, where's the oil came from.. I got lot more things to do on winter so I take time for this and not taking stress. hopefully get back on road next fall.. hopefully
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,070
  • I refuse...
Re: '77 CB750 café - Here I go again
« Reply #76 on: September 08, 2016, 12:23:04 PM »
Could be a good time to replace your studs too. And beware, there was a whole batch of junk non-stock cam chain tensioners that were being sold recently. The lesson learned by many members who used them was to spend the few dollars more and buy true, stock Honda tensioners.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,110
  • Sunny Central Florida
Re: '77 CB750 café - Here I go again
« Reply #77 on: September 08, 2016, 12:42:04 PM »
Quote from: calj737 on September 08, 2016, 12:23:04 PM
Could be a good time to replace your studs too. And beware, there was a whole batch of junk non-stock cam chain tensioners that were being sold recently. The lesson learned by many members who used them was to spend the few dollars more and buy true, stock Honda tensioners.

Amen to that:

http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 café - Here I go again
« Reply #78 on: September 08, 2016, 01:34:18 PM »
ouch.. I feel pain in my heart...

CMSNL and David Silver is places where I buy stuff for honda.

Other things to do is blast and clean engine all over with soda and paint it better.

When putting engine back in business thank god we have a Hackaweek on youtube. I've watched those clips several times and learn lot of tips, and need to watch couple more time.
« Last Edit: September 08, 2016, 01:37:24 PM by Andy K »
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 café - Here I go again
« Reply #79 on: September 09, 2016, 11:29:50 AM »
okay.. here is the reason why I take engine to the table again and where oil leaks

There is previous owners Einstein idea in cylinder head. They had try to cover those holes with something black silicone or something else s***t. I put loctite in previous time when engine was open but I don't understand how this silicone haven't get off earlier when sodablasted the engine.. Anyways.. Because I need to take cylinder head off, it's better to do bigger service to engine.

So.. need to do this time:
-Cam chain + tensioner
-Primary chains + tensioner
-all seals and gaskets
-sodablast and paint
« Last Edit: January 02, 2017, 03:06:53 AM by Andy K »
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 café - Here I go again
« Reply #80 on: September 09, 2016, 11:32:58 AM »
and pictures..
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #81 on: February 12, 2017, 02:22:50 PM »
New brakes..
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #82 on: February 13, 2017, 08:09:09 AM »
Looks ok
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #83 on: April 23, 2017, 12:14:49 AM »
Sodablasted.. Again
« Last Edit: April 23, 2017, 12:24:18 AM by Andy K »
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #84 on: April 23, 2017, 12:20:43 AM »
And painted..
« Last Edit: April 23, 2017, 12:24:40 AM by Andy K »
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #85 on: April 29, 2017, 03:44:06 AM »
Finally ordered some parts. Camchain, primary chains with tensioner and oil seals. With these I can finish the lower case.
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #86 on: August 02, 2017, 03:37:08 AM »
Been here since last time.. anyway..

Some action with Honda:

- Cylinders are getting 0.5 oversize
- Lower case actually ready for putting engine back in business
- tank, side covers, tail frame painted(not polished yet)
- Inner fender
« Last Edit: August 02, 2017, 03:38:53 AM by Andy K »
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #87 on: August 02, 2017, 03:47:30 AM »
Some pics..
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: '77 CB750 K7 café - Here I go again
« Reply #88 on: August 02, 2017, 07:48:24 AM »
Nice job in the inner fender.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Andy K

  • Full Member
  • *
  • Posts: 73
Re: '77 CB750 K7 café - Here I go again
« Reply #89 on: August 03, 2017, 12:00:03 PM »
Parts painted..with rattlecan paint and 2k clear coat. Water sanding and polishing included
Logged
ex bikes:
Honda CBR 1100XX '98
Suzuki VL1500 Intruder LC '98
Suzuki GSX1300R Hayabusa '03

this is my version of Honda CB750 '77:
http://caferacer77.blogspot.fi/2015/10/tasta-lahdettiin.html?m=0
Pages: 1 2 3 [4]   Go Up
« previous next »