Author Topic: If you want a bashed in tank cafe racer this is for you....  (Read 6972 times)

0 Members and 2 Guests are viewing this topic.

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,564
  • Big ideas....
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #1 on: November 01, 2007, 09:35:15 AM »
 Those holes in the covers look like they were made with buckshot. ???
Owner of the "Million Dollar CB"

Offline S-Dog

  • Hot Shot
  • ***
  • Posts: 553
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #2 on: November 01, 2007, 09:46:50 AM »
...or a blind kid with a hand drill  ;D
1975 CB750K Bright Orange with 8300miles
1983 GL650 Silverwing Restore project with 17k miles

http://www.NEHondaGuys.info/forums

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #3 on: November 01, 2007, 09:54:59 AM »
  In his description he states that it will need a new clutch soon and that Old Bike Barn is the place to go for cheap replacement parts.  WTF? Wake up Carpy :P

http://www.sohc4.us/forums/index.php?topic=7235.0
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline UnCrash

  • Pass
  • Master
  • *****
  • Posts: 1,705
    • My Blog
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #4 on: November 01, 2007, 10:05:51 AM »
Quote
Those holes in the covers look like they were made with buckshot.
Quote
...or a blind kid with a hand drill 


Maybe it was a monkey with a nailgun...

I was stumped by it when checking out the auction yesterday. 



You can't make too much popcorn, but you can definately eat too much popcorn.

Offline ksmith0034

  • When I grow up I want to be a
  • Hot Shot
  • ***
  • Posts: 616
    • Please subscribe to my motovlog
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #5 on: November 01, 2007, 10:27:54 AM »
Do people bang on Carpy because he makes a living doing what he loves, or because he makes a living doing what he loves instead of hanging out on forums?
It took 10 years but she's finally done!
             ↓   ↓   ↓   ↓   ↓
Stocker 2 Rocker CAFE conversion

My YouTube channel HERE:
https://www.youtube.com/MotoCafeRacer

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #6 on: November 01, 2007, 10:36:19 AM »
yep, the attention to detail is amazing...  bashed in?  nah. 

monkey w/ a speed drill?  you bet... but, it's only one part on an otherwise well done carpy cafe.

Do people bang on Carpy because he makes a living doing what he loves, or because he makes a living doing what he loves instead of hanging out on forums?

yes... and yes   ;D
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #7 on: November 01, 2007, 10:52:13 AM »
Chill out there Kevin, I wasnt bashing Carpy, but my immediate thought when I saw this bike was that the tank was bashed in and in my opinion didnt look that great - it just lookes dented to me. I posted it here for others to view it as there are many cafe lovers out there who might appreciate it. After all this is what Forums are for.

And dont worry I ride plenty as well  8)

cheers
Andy


« Last Edit: November 01, 2007, 11:00:47 AM by andy750 »
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

del105

  • Guest
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #8 on: November 01, 2007, 10:53:09 AM »
Im sure the bike is put together well but it is hideous looking. I know looks are subjective but the checkerboard stripes and purple visor have got to go.

Offline canttuckmyshirt

  • Enthusiast
  • **
  • Posts: 141
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #9 on: November 01, 2007, 11:11:57 AM »
I know looks are subjective but the checkerboard stripes and purple visor have got to go.

What, you don't like Carpy's old school appeal? HAHA  ;D

I have to agree. The look doesn't work for me either...
72 CB500, Abe Henry wheels
77 CB550, resto-mod

04 S2000, LS1 V8

Offline Irishguy

  • Enthusiast
  • **
  • Posts: 148
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #10 on: November 01, 2007, 12:15:15 PM »
Some of the bikes Carpy does appear to be ground-up, frame-off, meticulous builds, such as the ones he has commisioned.  And apparantly, others he just kind of cleans them up, gets them running pretty good does a garage cafe job out of them and sells them on eBay to make a quick buck.  This appears to be obne of the latter.

In my opinion some of his bikes look very well done and very tastefull, but some others he uses way too many gimmicks such as Cafe, Ace, and checkerboard stickers, etc...

The guy is talented and is capable of making a great bike, but they are not all well build, frame-off customs.  Many on this forum have built just as nice or nicer bikes.

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #11 on: November 01, 2007, 12:45:21 PM »
Some of the bikes Carpy does appear to be ground-up, frame-off, meticulous builds, such as the ones he has commisioned.  And apparantly, others he just kind of cleans them up, gets them running pretty good does a garage cafe job out of them and sells them on eBay to make a quick buck.  This appears to be obne of the latter.

In my opinion some of his bikes look very well done and very tastefull, but some others he uses way too many gimmicks such as Cafe, Ace, and checkerboard stickers, etc...

The guy is talented and is capable of making a great bike, but they are not all well build, frame-off customs.  Many on this forum have built just as nice or nicer bikes.

you said it brother ,,, i like some of carpys bikes , and then some of them are really gimmick-y , i would know it's a cafe even if it did't say cafe really big on the side ,... matter of fact i'm shocked that this one doesnt . 

he also does the dented gas tanks very well , with the exception of this one ,
i respect the craftsmanship, but this time he fell a little short (and he knows it, or he would ask for more money)

my main problem with carpy is that he's so damn cocky about his craft , to say "i relit the flame" dropped him a few cool points in my book.  but to each his own   

Offline heffay

  • Really Old Timer ...
  • *******
  • Posts: 7,874
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #12 on: November 01, 2007, 01:29:11 PM »
hey guys... i may not be a moderator anymore but i'd like to offer a small suggestion...

carpy is a member on our forum (or at least he was in the past although, not a very active poster) so, we might want to keep that in mind when replying to this thread. 
i'm sure he doesn't mind the feedback when posed constructively. 
Today: '73 cb350f, '96 Ducati 900 Supersport
Past Rides: '72 tc125, '94 cbr600f2, '76 rd400, '89 ex500, '93 KTM-125exc, '92 zx7r, '93 Banshee, '83 ATC250R, 77/75 cb400f

Offline Master Ted

  • Hot Shot
  • ***
  • Posts: 301
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #13 on: November 01, 2007, 02:27:09 PM »
How can he make any money at that price? If it were a hobby that would be another matter. I guess it could be a consignment but it don't look like it.
CB750/K2

Offline jonbuoy

  • Hot Shot
  • ***
  • Posts: 263
    • My rebuild:
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #14 on: November 01, 2007, 02:39:06 PM »
Shows it can be done with a DOHC as well as a SOHC.  No doubt Carpy has in a way relit the flame on the Cafe's via his website and saved numerous SOHC's especially the unloved F's from being broken up and scrapped.  He inherited the bike - means not all of the work on it was done by him. 

Offline Spikeybike

  • when planting C4 at your enemy's base make sure you don't use a
  • Really Old Timer ...
  • *******
  • Posts: 7,265
  • member #1150
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #15 on: November 01, 2007, 03:23:37 PM »

 
hey guys... i may not be a moderator anymore but i'd like to offer a small suggestion...

carpy is a member on our forum (or at least he was in the past although, not a very active poster) so, we might want to keep that in mind when replying to this thread. 
i'm sure he doesn't mind the feedback when posed constructively. 

i was keeping that in mind , i know he's a member and i still stand by what i said. Carpy is a good guy i've had several conversations with him. he definitely knows up from down when it comes to cafes . and he also knows exactly how cocky he is (just ask him).
i understand your just trying to keep the peace , but you have to understand that we don't all agree. and a debate is just that .
 although i have seen threads that were centered around slinging sh#% at Carpy. thats not what i was doing 
(notice signature)

tbone

  • Guest
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #16 on: November 01, 2007, 03:47:08 PM »
I have no axe to grind with Carpy and am quite indifferent to cafes but that tank looks like dookie!  :P
The bike looks like it was thrown together to make a quick buck. IMHO

Offline ekim98

  • Expert
  • ****
  • Posts: 788
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #17 on: November 01, 2007, 03:52:12 PM »
The bike looks like it was thrown together to make a quick buck. IMHO

+1
Patriot Guard Rider - KY. Ride with Respect

78 750k  cafe bike sort of
67 305  Superhawk (working project)

Andoo

  • Guest
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #18 on: November 01, 2007, 03:54:22 PM »
This is not a show bike, he states that, and it’s priced accordingly... He is not trying to sell a show bike.

Some of you guys sure like to put down what you can't do.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #19 on: November 01, 2007, 04:03:55 PM »
One mans NIGHTMARE is another mans WET DREAM..

 Good there is enough variety to go around, ie, there was discussion about pipes on here that I wouldnt run if you paid me.. but hey different strokes for different folks... we all have choices..

 I dont mind at all if someone dishes it out on a forum as long as they dont go "SCREAMING LITTLE GIRL" on us when someone starts handing it back...
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

tbone

  • Guest
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #20 on: November 01, 2007, 04:38:51 PM »
Some of you guys sure like to put down what you can't do.



One question: How on earth does a young whipper snapper like yourself have a clue as to what we (collectively or individually) can or can not do?

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,564
  • Big ideas....
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #21 on: November 01, 2007, 04:50:17 PM »
This is not a show bike, he states that, and it’s priced accordingly... He is not trying to sell a show bike.

Some of you guys sure like to put down what you can't do.

Objective criticism....as long as it IS that is part of free speech. I've bought Tshirts from Carpy back in the day....no problem. He is well known now ( Green Day bike, Cycle World etc) and more power to him. I stand by my comment about the drilled holes....a 5 year old could do that. I'd challenge Carpy to build a bike like mine (obviously and especially the engine part). I do think the price was high.
Owner of the "Million Dollar CB"

Offline UnCrash

  • Pass
  • Master
  • *****
  • Posts: 1,705
    • My Blog
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #22 on: November 01, 2007, 04:52:24 PM »
Quote
The guy is talented and is capable of making a great bike, but they are not all well build, frame-off customs.  Many on this forum have built just as nice or nicer bikes.

Quote
Quote from: tbone on Today at 05:47:08 PM
The bike looks like it was thrown together to make a quick buck. IMHO

+1

Um, I know that I participated in this mess with my monkey comment but come on.  What's wrong with the guy turning around a bike he got on the cheap to make some cash?  I have the upmost respect for someone who is able to make some cash while exercising their passions. 
You can't make too much popcorn, but you can definately eat too much popcorn.

tbone

  • Guest
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #23 on: November 01, 2007, 05:04:05 PM »
What's wrong with the guy turning around a bike he got on the cheap to make some cash?  I have the upmost respect for someone who is able to make some cash while exercising their passions. 


There's nothing wrong with it. It's the way of capitalism!
That said, there's also nothing wrong with expressing the likes or dislikes for his work either.

Again, in my opinion, this one looks a little shoddy. The lack of attention to detail is quite obvious.
Who knows but that tank and cover may well be failed attempts at a design theory and this low budget
project was a good way to rid the shop of some rejects.

That said, "for every butt there is a seat"! So if you dig this one so much than buy it!  ;)

Offline ksmith0034

  • When I grow up I want to be a
  • Hot Shot
  • ***
  • Posts: 616
    • Please subscribe to my motovlog
Re: If you want a bashed in tank cafe racer this is for you....
« Reply #24 on: November 01, 2007, 05:19:35 PM »
Hey, I do pretty shoddy work myself.  I've been known to turn a part for a buck or two.  Why don't you guys bang on me a while?
Is it because I don't build bikes for a living?  Is it because I am unknown?  Is it because I haven't won any shows or been in any rags?  Heck, I've never even been to a Green day concert!
So come on guys, rip me a bit , will ya?
It took 10 years but she's finally done!
             ↓   ↓   ↓   ↓   ↓
Stocker 2 Rocker CAFE conversion

My YouTube channel HERE:
https://www.youtube.com/MotoCafeRacer