Author Topic: Air Filter & Stack Filter Kit for 550's & 750's / The end, see post #898, pg 36 (Read 201936 times)

Tintop · « **Reply #125 on:** December 12, 2010, 05:29:51 PM »

Quote from: ffjmoore on December 12, 2010, 02:43:50 PM

Yeah put me on that list if im not already. I want one one still despite the fact It wont have checkers on it.

Noted ffj. If you have your heart set on having checkers on your bike; Carpy should have something.

wannabridin · « **Reply #126 on:** December 12, 2010, 09:55:51 PM »

are there any deposits required as of yet? if so, lemme know how much and your paypal account and i'll get it over asap! can't wait to hear how it performs on anything!!!

Tintop · « **Reply #127 on:** December 13, 2010, 05:24:27 AM »

Quote from: wannabridin on December 12, 2010, 09:55:51 PM

are there any deposits required as of yet? if so, lemme know how much and your paypal account and i'll get it over asap! can't wait to hear how it performs on anything!!!

I'll probably be asking for deposits after Xmas, so keep some coin in the piggy bank wannabridin. Would like to post some results from Terry's tests 1st.

I'm going to go through this thread, and edit an 'interest/confirmed' list into my 1st post. Should get that done shortly.

Kong · « **Reply #128 on:** December 13, 2010, 11:33:58 AM »

It will be interesting to see what, if any, carb jetting and setting recommendations come after they get a tryout. Either way you can put me in the confirmed column; deposit or full payment any time you want it.

FfejCB500four · « **Reply #129 on:** December 13, 2010, 12:09:41 PM »

Really looking forward to seeing the results for the cb500/550 filter and stacks..
im local in Toronto..
you can add me to the list if price stays comparable...

looks awesome..
JP

juice · « **Reply #130 on:** December 13, 2010, 12:47:34 PM »

put me in the interested list

Tintop · « **Reply #131 on:** December 13, 2010, 01:06:27 PM »

Quote from: jrazocb500f on December 13, 2010, 12:09:41 PM

Really looking forward to seeing the results for the cb500/550 filter and stacks..
im local in Toronto..
you can add me to the list if price stays comparable...
looks awesome..
JP

Quote from: juice on December 13, 2010, 12:47:34 PM

put me in the interested list

Consider yourselves added JP & juice. I am not anticipating any great change in the basic kit price I estimated. The 1st jetting results will be from Terry's 750 tests. However, they should give a very good indication of 500/550 requirements. The carbs on my 550 have already been modified, so my own sync, and tune results will add to the knowkedge base as well.

Tintop · « **Reply #132 on:** December 13, 2010, 02:09:15 PM »

I've started a list(s) in my 1st post to this thread. If your not on it, please PM me, and you will be added. Also if I haven't listed what bike its for, please let me know.

thanks - tintop

wannabridin · « **Reply #133 on:** December 13, 2010, 05:01:37 PM »

i'm on a 750! thanks TT!!

Tintop · « **Reply #134 on:** December 13, 2010, 05:44:19 PM »

Quote from: wannabridin on December 13, 2010, 05:01:37 PM

i'm on a 750! thanks TT!!

List has been updated, thanks wannabridin.

seanbarney41 · « **Reply #135 on:** December 14, 2010, 01:39:02 PM »

Hi Tintop, still interested and still poor

I ride a 750

Tintop · « **Reply #136 on:** December 14, 2010, 02:12:34 PM »

Quote from: seanbarney41 on December 14, 2010, 01:39:02 PM

Hi Tintop, still interested and still poor I ride a 750

I've updated the list. From the number of 'confirmed / serious interest', the 1st 10 appear spoken for. As I don't want to disappoint anyone later, the 1st order will be for 20 from ITG. So there will likely be some available for you and others, should you decide to move from interested to confirmed.

FrankenFrankenstuff · « **Reply #137 on:** December 14, 2010, 07:25:45 PM »

My "Anti-Pod" goof off engraving. If I get around to doing these clear for you guys they will be 1/8" Lexan, you can either paint it, or we can find some colored stock. I can engrave the aluminum ones also. Just food for thought. If there is to be a name or phrase engraved it will have to be short and when the unit is assembled- only seen along the outside edge.....but on track day..??

Yes I know that I didnt put the mounting holes in it.

Tintop, this is your baby- you get the first (only)? "custom" backplate if you wish.

wannabridin · « **Reply #138 on:** December 14, 2010, 08:04:43 PM »

you're ALWAYS at it!!! damn man, always blowing someones doors off!

FrankenFrankenstuff · « **Reply #139 on:** December 14, 2010, 08:08:08 PM »

FYI - I used the 'Norton' font for the "bastard child of soichiro" which is a frigging GREAT name for a band!! anyone??

Tintop · « **Reply #140 on:** December 14, 2010, 08:13:44 PM »

Wow Frankenstuff, that's great! But it looks like your 1st one was meant for ffjmoore.

I will take you up on the offer though. Just going to have to decide if it will be engraved alloy, clear, or maybe a blue tinted one.

I'll send you one of the extra backplates, so you have a sample with the different carb hole position / sizes.

So for those who wanted to 'individualize' the filter, there's your 1st option.

Flying J · « **Reply #141 on:** December 14, 2010, 09:00:32 PM »

Holy F!.

I didnt even see that. So funny. Im going to run the alloy one as it will match the rest of whats going on with my bike.

Tintop · « **Reply #142 on:** December 15, 2010, 04:54:30 AM »

Quote from: ffjmoore on December 14, 2010, 09:00:32 PM

Holy F!. I didnt even see that. So funny. Im going to run the alloy one as it will match the rest of whats going on with my bike.

edit: 1st I want to thank Frankenstuff for stepping up. The talent on this forum just continues to amaze. ffj, that wasn't my idea, and I nearly fell out of my chair LOL, when I saw it.