Author Topic: Calendar Girl Gets New Engine,Yosh,RC,etc. (Read 190721 times)

NitroHunter · « **Reply #2325 on:** January 01, 2016, 10:05:09 AM »

Ouch!

That strap they wrap around the nitro motors to keep the heads from blasting off are certified to 70,000 psi. But earlier this year (IHRA Baton Rouge) my pal Drums blew his apart and flattened the top frame tube on the underside. Damaged from the heads bouncing off.
But I could still swing both pistons nice on the rods.
That ballistic chest protector worn under the suit paid for itself. I told him he needed another one around the crotch.

MRieck · « **Reply #2326 on:** January 01, 2016, 03:20:19 PM »

Quote from: NitroHunter on January 01, 2016, 10:05:09 AM

Ouch!
That strap they wrap around the nitro motors to keep the heads from blasting off are certified to 70,000 psi. But earlier this year (IHRA Baton Rouge) my pal Drums blew his apart and flattened the top frame tube on the underside. Damaged from the heads bouncing off.
But I could still swing both pistons nice on the rods.
That ballistic chest protector worn under the suit paid for itself. I told him he needed another one around the crotch.

Wow....ballistic blankets with big, big, big Kevlar etc next?
I talked to Rick Stetson about Valentine's 245mph run. He said they like going quick but they don't going fast on Top Fuel bikes. Valentine went 238 mph at the 1/8 marker......shut it down not long after that.
Rick asked Dave if he pulled the chute....A relatively new addition to Top Fuel bikes. He said...."you bet your a$$ I did".
Great stuff guys.

Bill/BentON Racing · « **Reply #2327 on:** January 20, 2016, 04:48:30 PM »

Going to be light!!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2328 on:** January 20, 2016, 05:11:23 PM »

Bill E Bill E Bill E

A man and his obsession. U my hero bro!

Medyo Bastos · « **Reply #2329 on:** January 24, 2016, 12:31:04 PM »

...Save a tree, eat a beaver...

Bill/BentON Racing · « **Reply #2330 on:** January 24, 2016, 03:39:56 PM »

Medyo, Thanks for posting the video, Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2331 on:** January 24, 2016, 04:08:17 PM »

Bill, that sounds excellent. Sounds like it's much more than a 915

Congratulations brother.

Ask Mike about those lucky place mats. He has more time for head work now.

Bill/BentON Racing · « **Reply #2332 on:** January 24, 2016, 04:48:42 PM »

Uh, I'll leave him alone for a day or so! Lol. Thanks, Bill

BPellerine · « **Reply #2333 on:** January 25, 2016, 03:04:37 PM »

that "little" 915 sounds nice bill!haha billp

dragracer · « **Reply #2334 on:** January 25, 2016, 09:19:42 PM »

Quote from: Bill/BentON Racing on January 24, 2016, 03:39:56 PM

Medyo, Thanks for posting the video, Bill

She sounds great Bill. The way they're supposed to run. 10's, here we come dammit. Time for the rest to step up!!!!

Bill/BentON Racing · « **Reply #2335 on:** January 25, 2016, 10:33:25 PM »

I was hoping you'd like it, 1 down, 2 or 3 to go! Lol, glutton for sumpin I am!!

, Bill

Bill/BentON Racing · « **Reply #2336 on:** January 30, 2016, 06:56:31 AM »

Wow, they (dyno peeps) gave me this after Calendar Girl set new record!! Awesome!

Just kidding, it is the next hp goal !!!!

,Bill

jweeks · « **Reply #2337 on:** January 30, 2016, 03:37:42 PM »

Corvair engine lid emblem.

Bill/BentON Racing · « **Reply #2338 on:** January 30, 2016, 04:03:42 PM »

Give that man a ride on an Automatic 750! You are correct sir

POPS 911 · « **Reply #2339 on:** February 01, 2016, 04:41:39 AM »

BILL MWS : Can't wait to see you run 10 anything on that HONDAMATIC that's a site I want to see on the 1320'. I love riding my old power glides on the street [ 400-450-750cc ] 1976 -1983 my girl friend likes to get off the back and give the folks a little info talk about these old , well built bikes of the pass. The 450A with 4,000 miles is her favorite ride in the country on twisty roads at 65mph w/two up. I can see that look on the sheriffs face when he says your 20-25 miles over the speed limit, your 73 and she 70, and you both are CARRY AND CONCEAL ....... you should know BETTER !

Old Scrambler · « **Reply #2340 on:** February 01, 2016, 07:01:04 AM »

FASTER THAN A SPEEDING..........BULLET

Bill/BentON Racing · « **Reply #2341 on:** February 03, 2016, 08:31:37 PM »

Let's build sumpin!

, Bill

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2342 on:** February 03, 2016, 08:33:52 PM »

Don't forget to use some 'lubricant' on the engine too

Bill/BentON Racing · « **Reply #2343 on:** February 03, 2016, 08:54:24 PM »

Just call me "Woody" Lol!!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2344 on:** February 03, 2016, 08:57:27 PM »

Yeah Woody, I see you hiding the pie and the white

kmb69 · « **Reply #2345 on:** February 03, 2016, 09:09:28 PM »

Spanky, you get my PM?

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2346 on:** February 03, 2016, 09:17:04 PM »

Gotcha Leroy. Pm back at you.

Bill/BentON Racing · « **Reply #2347 on:** February 13, 2016, 08:22:52 PM »

Bill and Trey's new rides. .oh damn, we forgot the $250,000.00 transfer fee! Oh well. Had a great visit with Demey, Andy and the guys at D M.E. today. Wow ,we had fun and learned a lot! Demey's making me an aluminum swingarm 12 inches over,air, bearings, axle and adjusters, and removable extensions for axle. Also has my 17 inch Chicane and Shinko hook up. Ooooh, getting excited!! Bill
Truck goes pretty good for 279,000 plus! Hehe!

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2348 on:** February 13, 2016, 08:25:55 PM »

And that was with his big new trailer too

Great updates Billy.

dragracer · « **Reply #2349 on:** February 14, 2016, 03:05:08 PM »

Quote from: Bill/BentON Racing on February 13, 2016, 08:22:52 PM

Bill and Trey's new rides. .oh damn, we forgot the $250,000.00 transfer fee! Oh well. Had a great visit with Demey, Andy and the guys at D M.E. today. Wow ,we had fun and learned a lot! Demey's making me an aluminum swingarm 12 inches over,air, bearings, axle and adjusters, and removable extensions for axle. Also has my 17 inch Chicane and Shinko hook up. Ooooh, getting excited!! Bill
Truck goes pretty good for 279,000 plus! Hehe!

Bill,

Good deal on getting the aluminum arm done for Calender girl. Once the template is done, I'm sure others on the forum will consider getting a custom DME arm as well. Your bike is turning the corner to a really competitive machine. Can't wait to see the first pass.

News:

Author Topic: Calendar Girl Gets New Engine,Yosh,RC,etc. (Read 190721 times)