Author Topic: "INSPIRATION GALLERY " (Read 2285638 times)

Ecosse · « **Reply #5150 on:** June 14, 2010, 08:15:26 PM »

Quote from: 754 on June 13, 2010, 09:48:38 PM

Ecosse, Goldammer has not used Buells in his bikes.
That is , I think #1 of the three big singles he has done so far
Starts off with big twin parts, reworks it, so it looks like it was made as a single.

4 1/4 inch bore.. .. ends up around 950cc's

The front end on his green bike.. he has tested one of those to 160 mph.. on a single .. it has a shock with damping, inside the neck!

thanks for the correction... and info. wild stuff!

Quote from: Irk11 on June 14, 2010, 08:14:42 PM

I had those same lasers in my senior photo, but I left the cat at home!

i'm diggin the bill cosby sweater!!

Ecosse · « **Reply #5151 on:** June 14, 2010, 08:26:03 PM »

normally i would post this in 'other bikes' or something. but, this is the balls!

note: there will be fire.

RustyOlive · « **Reply #5152 on:** June 14, 2010, 09:54:19 PM »

SOOOOOOOOOOOOOOOO BAD ASS!!! LOVE IT Ecosse!!! nice find..
found this vid too... watch to the end... makes your skin jump... LOL

[youtube=425,350][/youtube]

Ecosse · « **Reply #5153 on:** June 14, 2010, 10:06:55 PM »

Quote from: RustyOlive on June 14, 2010, 09:54:19 PM

watch to the end... makes your skin jump... LOL

holy crap you weren't kidding!

that sucker is loud too!

scunny · « **Reply #5154 on:** June 14, 2010, 10:32:18 PM »

why are there flames coming from the exhaust valve area ? bad seals/guides ?

strynboen · « **Reply #5155 on:** June 14, 2010, 11:07:03 PM »

uoy be care not to put fire on the nees, this vas before green lights under tank..nice small flames,intristing vith holes in bottom of cylender,,is it for extern lube of pistons

johnsy · « **Reply #5156 on:** June 15, 2010, 02:00:20 PM »

gimmy!

ev0lve · « **Reply #5157 on:** June 15, 2010, 02:03:10 PM »

Is that header wrap? I like that... a lot.

sangyo soichiro · « **Reply #5158 on:** June 15, 2010, 02:06:29 PM »

I was thinking the same thing Iggy. That might solve my issue with what to do with my rusty fork tubes - paint them and wrap them (except I'll use something a lot less expensive than header wrap!). Nice find Johnsy.

ev0lve · « **Reply #5159 on:** June 15, 2010, 02:12:34 PM »

What do you think they did to the covers? Scuff them up? Some kind of etch?

Nice dent in the tank. I think I can handle that mod myself

MCRider · « **Reply #5160 on:** June 15, 2010, 02:45:25 PM »

Quote from: soichiro on June 15, 2010, 02:06:29 PM

I was thinking the same thing Iggy. That might solve my issue with what to do with my rusty fork tubes - paint them and wrap them (except I'll use something a lot less expensive than header wrap!). Nice find Johnsy.

Maybe bicycle handlebar wrap? Choice of colors.

Grnrngr · « **Reply #5161 on:** June 15, 2010, 02:49:33 PM »

Baseball Bat Handle tape?

ev0lve · « **Reply #5162 on:** June 15, 2010, 03:03:16 PM »

Quote from: grnrngr on June 15, 2010, 02:49:33 PM

Baseball Bat Handle tape?

Bet you're right

Ecosse · « **Reply #5163 on:** June 15, 2010, 03:13:42 PM »

good score johnsy! good brain storm mcrider, et al!

i'm not keen on the contour of the black on the tank (seems awkward) but overall it's a keeper!

Spikeybike · « **Reply #5164 on:** June 15, 2010, 03:30:41 PM »

hmmmmm ... i might have to make some bars like that for my KZ

weekend_junkie · « **Reply #5165 on:** June 15, 2010, 04:34:15 PM »

Quote from: Iggy on June 15, 2010, 02:12:34 PM

Nice dent in the tank. I think I can handle that mod myself

Looks like a speed-dent to reduce the aerodynamic profile! I've had a few of those custom installed before...

Spikeybike · « **Reply #5166 on:** June 15, 2010, 05:09:57 PM »

Quote from: weekend_junkie on June 15, 2010, 04:34:15 PM

Looks like a speed-dent to reduce the aerodynamic profile! I've had a few of those custom installed before...

i doubt that .. since it's only on one side

johnsy · « **Reply #5167 on:** June 15, 2010, 07:04:57 PM »

Quote from: Iggy on June 15, 2010, 03:03:16 PM

Quote from: grnrngr on June 15, 2010, 02:49:33 PM
Baseball Bat Handle tape?
Bet you're right

i think ill steal this too...i was trying to get rid of more shiny bits.

Ecosse · « **Reply #5168 on:** June 15, 2010, 07:48:20 PM »

i can see it now: "the mummy bike!!"

void909 · « **Reply #5169 on:** June 15, 2010, 07:53:44 PM »

Quote from: Iggy on June 15, 2010, 02:12:34 PM

What do you think they did to the covers? Scuff them up? Some kind of etch?

Nice dent in the tank. I think I can handle that mod myself

I pulled off a finish like that with a wire wheel one on accident. ran with it and it turned out to my liking.

754 · « **Reply #5170 on:** June 15, 2010, 08:15:11 PM »

Cover looks bead or media blasted..

The tape to me looks like Hockey Stick tape... which may be AKA cloth electricians tape.. which might be same for bats....nothing new...

Boardtrackers used it for grips 100 years ago...

Sam Green Racing · « **Reply #5171 on:** June 16, 2010, 07:11:58 AM »

Some of the best eye candy ever seen...ENJOY.

http://www.deejay51.com/honda_hall_page_2.htm

Sam.

weekend_junkie · « **Reply #5172 on:** June 16, 2010, 09:24:19 AM »

Quote from: Spikeybike on June 15, 2010, 05:09:57 PM

Quote from: weekend_junkie on June 15, 2010, 04:34:15 PM
Looks like a speed-dent to reduce the aerodynamic profile! I've had a few of those custom installed before...
i doubt that .. since it's only on one side

By only puting a dent on the right side, the bike is perfect for a left turn oval track. Reduced air friction on the right side is the same effect as added drag on the left side, allowing for easier left turns. The modification was obviously done with great care and precision, perhaps with a carefully swung paint can or dropped shovel/step-ladder. I hear dealerships will often do this for free and not even charge the customer.

I only joke, of course...

Ecosse · « **Reply #5173 on:** June 16, 2010, 11:16:10 AM »

Quote from: SamCB750A on June 16, 2010, 07:11:58 AM

Some of the best eye candy ever seen...ENJOY.

http://www.deejay51.com/honda_hall_page_2.htm

Sam.

and enjoy it i did!

Matt Hubbell · « **Reply #5174 on:** June 16, 2010, 11:40:26 AM »

Nice tank

News:

Author Topic: "INSPIRATION GALLERY " (Read 2285638 times)