« previous next »
Pages: 1 ... 6 7 [8]   Go Down

Author Topic: CB550 Track Bike  (Read 40944 times)

0 Members and 1 Guest are viewing this topic.

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,485
Re: CB550 Track Bike
« Reply #175 on: September 30, 2017, 05:06:58 AM »
Don, the crank taper for the alt is cut off and 3/16" flat alum used for a cover just to protect the engine cases. Right side I mounted the ignition bits "inside" the stock ign plate so that cover too can be very nearly flat.

Rocket, I think Scotty uses AirTech but if I'm not mistaken those are designed for the 750 and the lower is bulbous around that crank area on a 500. Yours being flat will look more slim there.

Did your guy have a mold of some kind?
Logged

Offline Rocketman

  • Hot Shot
  • ***
  • Posts: 391
Re: CB550 Track Bike
« Reply #176 on: September 30, 2017, 06:32:51 PM »
Yes, he made a mold for the wider fairing.  Was surprised when I saw your bike at Mosport how narrow you were able to make it.  Excellent job of packaging the ignition "inside" the plate.  You are correct, Scotty is using a CR750 fairing. 
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: CB550 Track Bike
« Reply #177 on: September 30, 2017, 08:09:41 PM »
Quote from: bwaller on September 30, 2017, 05:06:58 AM
Don, the crank taper for the alt is cut off and 3/16" flat alum used for a cover just to protect the engine cases. Right side I mounted the ignition bits "inside" the stock ign plate so that cover too can be very nearly flat.

Rocket, I think Scotty uses AirTech but if I'm not mistaken those are designed for the 750 and the lower is bulbous around that crank area on a 500. Yours being flat will look more slim there.

Did your guy have a mold of some kind?

Brilliant way to shave 3 inches!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline innovativems

  • Expert
  • ****
  • Posts: 1,029
    • Innovative MotoSports
Re: CB550 Track Bike
« Reply #178 on: September 30, 2017, 09:03:32 PM »
How did I mess this thread!!!   Love this build!


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline Darren Jakal

  • Hot Shot
  • ***
  • Posts: 395
Re: CB550 Track Bike
« Reply #179 on: October 01, 2017, 11:27:51 AM »
Really like your project.

I love fairings on these bikes and would like to see some pics of the cockpit. Are your gauges fixed to the fairing or do they move with the forks?

cheers, Darren
Logged

Offline Rocketman

  • Hot Shot
  • ***
  • Posts: 391
Re: CB550 Track Bike
« Reply #180 on: October 01, 2017, 05:20:02 PM »
Thanks for the appreciation.  Truly a labor of love.  My tach is fixed to the front fairing mount.  Here is an older photo of the front fairing/tach mount.  The mount is made of steel tubing and was fabricated by me.  Will post more when I source the windscreen and finish mounting the fairing.  The tach is from Scitsu. 


Logged

Offline Darren Jakal

  • Hot Shot
  • ***
  • Posts: 395
Re: CB550 Track Bike
« Reply #181 on: October 01, 2017, 06:43:42 PM »
Hey thanks for those pics! Really great work.

Darren
Logged

Offline Seanery

  • Full Member
  • *
  • Posts: 5
Re: CB550 Track Bike
« Reply #182 on: July 15, 2020, 06:39:54 PM »
This is a great thread. Love the bike. What's the current status? Would love to see some finished (although they never really are) pics.
Logged

Offline Rocketman

  • Hot Shot
  • ***
  • Posts: 391
CB550 Track Bike
« Reply #183 on: August 12, 2020, 01:28:18 PM »
Sorry for the slow reply.  After finishing the build I took my Honda racing.  That story can be found here.

http://forums.sohc4.net/index.php/topic,149408.125.html

Still waiting on my buddy to finish to mold for the fairing.  Needed some changes to allow the windscreen to fit.  Maybe yet this year. 
Logged
Pages: 1 ... 6 7 [8]   Go Up
« previous next »