On the suggestion of the esteemed Steve-o, I am spawning this thread for those of you that are building and tinkering with your workspace.
I'm putting a shop together now, am a few weeks hard into it, although a lot has led up to it. So I'll start with a little catch up and update as I go.
Raw space.
Perfectly good, a little rough around the edges.

So I pressure washed the floor and the roll-up door and cleaned out the loft, then etched it for paint.

Painted it.

Ahhhh

Scrounged some additional 8' lights from a neighbor here, pressure washed THOSE, got the building electrician to work with me and install them:

Started moving stuff in, roughing it into position:

Late last week and this, some heavy stuff started to arrive...

Ran up to Phoenix last week with my friend James (aka Harisuluv), and visited the mythical Trailer of Carbs. Here's the man, literally standing on a foot of cylinders and cylinder heads at this instant:

...and then picked up a big commercial kitchen sink, just visible at the right:

And tomorrow we are going to be piping some air and related, and today I did order a dry blast cabinet. And so that's where we're at.