Author Topic: DWMS RACING CB550F SUPER REVERSE PORT! NEW ENGINE COLORS AND PHOTOS! (Read 115116 times)

joeyputt · « **on:** November 26, 2010, 12:42:38 pm »

Hello All! I am new here to this forum and my name is Joe, I own and operate Joes Performance/DWMS Racing here in southeast Alabama USA and this is my personal CB550 Supersport project that I have going! This bike is very sentimental to me as it was my first big bike (non dirt/enduro bike) and I have owned it since I was a child! It was parked several years ago and I had the engine out and sitting under the workbench for several years so as you can imagine it was a complete mess! I got her out and started cleaning her up, painted the block, cylinders, head, etc. engraved the sprocket, clutch and stator covers, sanded and polished the heads cooling fins and the whole top shelf of the fins, and polished the rocker box's end cap. I am currently polishing on the covers I engraved and as soon as I can get them done I am going to start on the chassis! Here are some pic's I hope you enjoy them! more pic's over at my website if you would like to look! www.dwmsracing.com

Polished the fins...

...polished the whole top shelf of the fins...

...engraved the sprocket cover...this is not polished yet!...

...engraved the clutch cover...also not polished yet!...

FunJimmy · « **Reply #1 on:** November 26, 2010, 12:53:32 pm »

Wow!
That looks so keul.
Love the choice of colours too.

Bike art.

Welcome to the clan.

FJ

Jerry Rxman Griffin aka MuthaF'er · « **Reply #2 on:** November 26, 2010, 01:51:08 pm »

Looks great so far. Nice work.

Stev-o · « **Reply #3 on:** November 26, 2010, 02:13:01 pm »

Welcome. Wow - that is custom!

tango911 · « **Reply #4 on:** November 26, 2010, 02:14:08 pm »

sweet!

theofam · « **Reply #5 on:** November 26, 2010, 04:55:55 pm »

What color did you paint the intake manifolds and valve cover? It looks great.

BobbyR · « **Reply #6 on:** November 26, 2010, 06:33:40 pm »

Beautiful work

Industrial Rat400f Killer · « **Reply #7 on:** November 26, 2010, 07:55:12 pm »

Very cool!

Tex · « **Reply #8 on:** November 26, 2010, 07:58:31 pm »

WOW that is beautiful

Flying J · « **Reply #9 on:** November 26, 2010, 08:03:42 pm »

I like it. What color/brand is that orange paint?

lordmember1969 · « **Reply #10 on:** November 27, 2010, 06:08:24 am »

Nice

joeyputt · « **Reply #11 on:** November 28, 2010, 08:06:16 am »

Thank you for the compliments! The colors are Titanium Silver Blue on the block and head, Flat Black on the cylinders, and Burnt Copper on the valve cover and intakes. The inlaid color in the engravings is the Burnt Copper as well.

Industrial Rat400f Killer · « **Reply #12 on:** November 28, 2010, 08:17:28 am »

What tools are you using to do the engravings.

Zaipai · « **Reply #13 on:** November 28, 2010, 08:20:42 am »

Damn Sam, er Joey.. That is one sweet job. Talk about bike Porn.. Holy crap.. That is just fantastic!

Can't wait to see what you do with the rest of it. Make sure to post a build thread on this post if you start one.

.: Scott :.

joeyputt · « **Reply #14 on:** November 28, 2010, 01:15:40 pm »

I cut all my engravings here at the shop, I draw them in pencil first on the cover and then cut them out freehand with a hand held rotary tool and various cutting bits depending upon the design. If anyone would like engraving done just contact me through my site www.dwmsracing.com and yes I am building the whole bike and will use this thread to keep adding photos to as I get it done! I wanted to get the engine done first and then I will move on to building the chassis!

754 · « **Reply #15 on:** November 28, 2010, 07:09:22 pm »

Very nice work there..
Is the engine paint, wet, or powder or waterborne ?

Tintop · « **Reply #16 on:** November 28, 2010, 07:19:10 pm »

Quote from: joeyputt on November 28, 2010, 08:06:16 am

Thank you for the compliments! The colors are Titanium Silver Blue on the block and head, Flat Black on the cylinders, and Burnt Copper on the valve cover and intakes. The inlaid color in the engravings is the Burnt Copper as well.

Is the Burnt Copper a VHT or Duplicolour paint? I like Titanium Blue, your's came out looking darker than mine though.

q2418130103p · « **Reply #17 on:** November 29, 2010, 05:13:30 pm »

very neat.

I cant wait to see it in the frame.

Toxic · « **Reply #18 on:** November 29, 2010, 05:47:29 pm »

You have set an incredibly high standard for the rest of the bike to follow.

I can't wait to see it develope.

joeyputt · « **Reply #19 on:** November 29, 2010, 06:29:22 pm »

I had just a few to play and worked on the cylinder heads fins on the other side of the engine...and yes toxic I have a few creative ideas for the chassis build! Thank you all so much for your compliments, they are what drives me!

here is the clutch side of the engine...still have not had time to polish the clutch cover or oil pan yet!

Zaipai · « **Reply #20 on:** November 29, 2010, 06:45:21 pm »

I can't wait to see the rest of the bike when you are done, no pressure tho..You set the bar pretty high..

.: Scott :.

cdoggy81 · « **Reply #21 on:** November 29, 2010, 07:31:57 pm »

Subscribed!!!

greenjeans · « **Reply #22 on:** November 30, 2010, 05:05:37 am »

Love the polished fins.....

Can't wait to see the rest of the bike.

joeyputt · « **Reply #23 on:** December 01, 2010, 04:26:28 pm »

Thanks again everyone for the compliments! I can not wait to have her all togethor but I really want to take my time on this one and spend a lot of time on detail while building the chassis. The seat/tail section alone will probably take me 2 to 3 weeks of spare time to do but in the end it will be worth it and I have never seen one done!

tango911 · « **Reply #24 on:** December 01, 2010, 04:44:30 pm »

I wish I had your patience and expertise. Looking forward to seeing the build finished. Keep the pics coming.

steve

News:

Author Topic: DWMS RACING CB550F SUPER REVERSE PORT! NEW ENGINE COLORS AND PHOTOS! (Read 115116 times)