Author Topic: Calendar Girl Gets New Engine,Yosh,RC,etc. (Read 174943 times)

jweeks · « **Reply #50 on:** October 31, 2011, 04:11:20 PM »

Wired to the horn button?

Hondamatic

dragracer · « **Reply #51 on:** November 01, 2011, 12:41:27 PM »

Quote from: JWEEKS on October 31, 2011, 04:11:20 PM

Wired to the horn button?

Hondamatic

Lol. Correct, now give that man a cigar.

Bill/BentON Racing · « **Reply #52 on:** November 01, 2011, 01:00:17 PM »

That's tempting!!!

Bill
Had nitrous on my mid engine 283 66 Corvair......it was BAD!!

Bill/BentON Racing · « **Reply #53 on:** November 05, 2011, 06:41:09 PM »

Getting closer,gonna try to fire up tomorrow morning.Pics:

Valdosta maybe!

Needs a Mike Rieck head!

Well he did provide rear sprocket 50 t.Thanks,Mike

Rt side.

Shorty Shocks from Ken @ Cycle X.Thanks Jake.

Hope engines OK!

Love that Yosh replica pipe from Carpy.Thanks Steve.
Pick Sam up Thurs.Still gotta a lot to do...but not as much as Frank aka Dragracer!

Sam Green Racing · « **Reply #54 on:** November 06, 2011, 01:39:16 AM »

Looking good Billy, keep us posted and reply to PMs when you get a minute.

Sam.

Bill/BentON Racing · « **Reply #55 on:** November 06, 2011, 01:17:23 PM »

Sam,I pm'd you.Calendar Girl runs and sounds pretty damn good!

Pics:

Let's go Racing!! She runs

Ought to be fun!

Sam,need mo decals.

Outside running!!!!

Valdosta the 750 couple Samauto and Calendar Girl debut!!!

MRieck · « **Reply #56 on:** November 06, 2011, 02:56:54 PM »

Nice work Bill.

Sam Green Racing · « **Reply #57 on:** November 07, 2011, 04:28:17 AM »

Looks good Billy, will bring more decals. Will PM arrival info tonight, forgot to bring it to work

Sam.

Bill/BentON Racing · « **Reply #58 on:** November 07, 2011, 05:29:48 AM »

Mike,Thanks,still needs that Stage III head of yours on my bench.

Sam,yes I need that! Getting a little ancy myself.

Valdosta here we come.Bill
Hope to install cooler and set ignition timing tonight.And a ton of other stuff!

Sam Green Racing · « **Reply #59 on:** November 07, 2011, 05:53:07 AM »

I think it is 4.45pm (16.45) Terminal S but will check.
Got you a Joey poster and a 100year TT souvenir pack.

un-opened

more decor for the bat cave.

Sam.

tweakin · « **Reply #60 on:** November 07, 2011, 06:03:18 AM »

Looks great and I am sure it will run even better.

Jim F · « **Reply #61 on:** November 07, 2011, 06:27:31 AM »

I am ready for Valdosta
I have 10 Galons of race gas and a tank full of gas
What's the problem guys ( I'm going to get hit with the dinner checks for that)
Be there Thursday evening
Bill call if I need to bring anything else (tools ect, ect,)

Sam Green Racing · « **Reply #62 on:** November 07, 2011, 06:37:16 AM »

I think dinner will be on me Jimmy

all weekend.

Thursday can't come quick enough

Sam.

Jim F · « **Reply #63 on:** November 07, 2011, 08:50:06 AM »

looking forward to seeing you Sammy
and everyone else on the team

Jim

Sam Green Racing · « **Reply #64 on:** November 07, 2011, 12:56:18 PM »

Quote from: SamCB750A on November 07, 2011, 05:53:07 AM

I think it is 4.45pm (16.45) Terminal S but will check.
Got you a Joey poster and a 100year TT souvenir pack. un-opened more decor for the bat cave.

Sam.

Time and terminal are correct Billy, perhaps half to three quarters of a hour to clear imigration and baggage claim.

Sam.

scunny · « **Reply #65 on:** November 07, 2011, 01:18:37 PM »

have a good time guys. can't beat a day at the track.
Sam, on a side note. the babe magnet shirt still isn't working, could it be from a bad batch ?

Bill/BentON Racing · « **Reply #66 on:** November 07, 2011, 04:50:55 PM »

You gots to shave yo head!

scunny · « **Reply #67 on:** November 07, 2011, 04:57:56 PM »

damn, shaved head needed huh, I've only just graduated to a "mullet" that could explain it.

bikes looking great by the way.

Old Scrambler · « **Reply #68 on:** November 07, 2011, 05:56:58 PM »

The crew is looking to have a great time! Bill, CG looks real nice! Go Get Em!

Sam Green Racing · « **Reply #69 on:** November 08, 2011, 12:31:58 AM »

Quote from: scunny on November 07, 2011, 04:57:56 PM

damn, shaved head needed huh, I've only just graduated to a "mullet" that could explain it.

bikes looking great by the way.

It's not just the shaved head Larry, you do need to be half good looking as well

Another thing, don't miss any of the monthly baths.

Sam.

Bill/BentON Racing · « **Reply #70 on:** November 08, 2011, 08:37:12 PM »

Tach wired,need to make chain guard,but she's ready...ok,willing!!!

Installed a`couple crankcase vents,need somethingb to put the hoses in!

Pics:

Frank,see the clutch stop!

Waste of a good beer,no a beer.

A better shot.

Valdosta here we come,now if we can do that vini,vidi,vici thing,we'll be OK!

scottly · « **Reply #71 on:** November 08, 2011, 08:47:23 PM »

Hope she runs as good as she looks, Bill. Nice build, and in a short amount of time, as well. Good luck at the track to all y'all!!!

dragracer · « **Reply #72 on:** November 09, 2011, 08:36:06 AM »

Billy, you got me beat my friend. I decided to slow down and not be in a hurry to screw up on my project bike. I had 3 races left in the season to get pass and they took away a lot of my free time for the bike project. I'll have it ready and fully tested by next season though. I'll sit back and enjoy you and Sam racing in street ET. I may just run pro ET only for both days or one day pro ET and top gas the next.

jweeks · « **Reply #73 on:** November 15, 2011, 06:46:22 PM »

Let's get the swingarm discussion into the correct topic. Bill prefers a good appearance, which is a challenge when trying to use modern rubber. 17" wide rims with spokes?? I think that the next step might be a less functional 18" rim with "bad" rubber as a step up from where we are. Bill isn't looking to run 10's. I don't think that the comfort level will be there. The challenge is with the clutch lever. Slipping the clutch off of the starting line is a big challenge when you aren't comfortable with the grab of the clutch. The best I saw was around a 1.9XX 60'. Quicker releases of the clutch lever had the bike going up, quickly. The longer swing arm is planned to add confidence to the launch with control. I'm thinking mid to upper 1.8's for 60' with the hope to tune to an 11.99. He's happy with Street ET. The Hondamatic will be more consistent in the serious local races. Just my opinion...

Jon Weeks

Bill/BentON Racing · « **Reply #74 on:** November 16, 2011, 04:30:39 AM »

Jon,you mean Bill cares about appearance? Ha Ha!! Plans are swingarm and airshifter this coming year and wheel set up the next.Thanks for all the input,keep it coming.Bill

next year ET goals ,be in the 11's mid,hopefully.

News:

Author Topic: Calendar Girl Gets New Engine,Yosh,RC,etc. (Read 174943 times)