Author Topic: New guy, first build  (Read 56661 times)

0 Members and 5 Guests are viewing this topic.

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: New guy, first build
« Reply #275 on: April 22, 2015, 01:44:31 PM »
Split loom!?!?! Are you kidding me!  >:(

No, it's full length polyester braid, with heat shrink at both ends.  ;)
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
New guy, first build
« Reply #276 on: April 24, 2015, 06:16:06 AM »
Decided i wanted to keep my engine clean with an air/oil separator before my crank case filter. In a flash of brilliant backyard engineering i realized i positioned my inlet half an inch from the drain. on the upside i now have a killer industrial crack pipe

...Back to the drawing board for Mark II


Sent from my iPhone using Tapatalk
« Last Edit: April 24, 2015, 06:19:19 AM by P.abrera »

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
Re: New guy, first build
« Reply #277 on: April 25, 2015, 03:12:16 AM »
Air/Oil separator Version 2.0 ...bit more R&D went into this one


Sent from my iPhone using Tapatalk

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,966
Re: New guy, first build
« Reply #278 on: April 25, 2015, 03:33:40 AM »
Dude, you have skills!  Very nice indeed.
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
Re: New guy, first build
« Reply #279 on: April 25, 2015, 03:42:31 AM »

Dude, you have skills!  Very nice indeed.
thanks. Air/Oil separator: fancy name for a piece stainless tube stuffed with steel wool then sealed on both ends


Sent from my iPhone using Tapatalk

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: New guy, first build
« Reply #280 on: April 25, 2015, 04:00:22 AM »
Very clean.  Where do you plan to mount it?

mystic_1
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
New guy, first build
« Reply #281 on: April 25, 2015, 05:44:32 AM »
Very clean.  Where do you plan to mount it?

mystic_1
its goin in the rear triangle. ill get a bracket goin tomorow. Plan to hang it from the bottom of my electronics tray next to the airbox.  I hear you get too much oily mist on the engine with just a filter straight off the rocker breather.


Sent from my iPhone using Tapatalk
« Last Edit: April 25, 2015, 05:47:36 AM by P.abrera »

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: New guy, first build
« Reply #282 on: April 25, 2015, 06:13:06 AM »
That can be the case. I initially thought I had another valve colver leak but it was mist collecting from the breather filter.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Trad

  • Expert
  • ****
  • Posts: 964
Re: New guy, first build
« Reply #283 on: April 25, 2015, 07:55:55 AM »
Man, that's upper cool! Such nice work and attention to detail.
74 CB550 Build: NOS-GUTTED-OEMplus-HOLDTRUE
http://forums.sohc4.net/index.php/topic,130575.0.html

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
New guy, first build
« Reply #284 on: May 03, 2015, 04:07:27 AM »
Waiting for advice on my wiring/electrical SOS meanwhile got a bracket goin for the air/oil separator.


Sent from my iPhone using Tapatalk
« Last Edit: May 03, 2015, 07:36:51 AM by P.abrera »

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,134
  • I love to restore & travel. Keep'em Going Strong !
Re: New guy, first build
« Reply #285 on: May 03, 2015, 10:22:33 AM »
Nice work  8)
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
Re: New guy, first build
« Reply #286 on: May 12, 2015, 06:16:08 AM »
We love progress pics...at least i know i do

My stock F-headers were in poor shape and werent gona work with my rearsets. Finding a ready-made 4-1 system locally was a tall order. So i had a local shop bend me a 4-1 with a 12" reverse-cone shorty in SS. Fab work's dun except for a hanger. Dont plan to chrome, just sumthing between a brushed/lightly polished finish.

We tried something different and ribbed the endpipe as a play off the ribbed upholstery.


Sent from my iPhone using Tapatalk

Offline Bootsey

  • Hot Shot
  • ***
  • Posts: 383
Re: New guy, first build
« Reply #287 on: May 12, 2015, 04:41:12 PM »
That exhaust looks great! Perfect addition to the rest of the bike.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: New guy, first build
« Reply #288 on: May 12, 2015, 04:49:48 PM »
Are those rings on the reverse cone simply decorative or functional?  Are they on the inside surface of the cone, too?  If so, I wonder if they have any effect on gas flow.
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
Re: New guy, first build
« Reply #289 on: May 12, 2015, 11:22:36 PM »

That exhaust looks great! Perfect addition to the rest of the bike.
thanks man


Sent from my iPhone using Tapatalk

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
New guy, first build
« Reply #290 on: May 12, 2015, 11:38:36 PM »
Are those rings on the reverse cone simply decorative or functional?  Are they on the inside surface of the cone, too?  If so, I wonder if they have any effect on gas flow.

Theyre bead-rolled on the pipe. I felt they were primarily decorative, but the pipemaker says its beneficial for better back pressure for the short system i asked for. Its a packed and baffled can though so i dont know how much it really affects exhaust flow. Could be all bro-science R&D [emoji1 i like that its a bit different and not like every other can out there.


Sent from my iPhone using Tapatalk
« Last Edit: May 12, 2015, 11:47:43 PM by P.abrera »

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
New guy, first build
« Reply #291 on: May 26, 2015, 05:21:36 AM »
Completely assembled shakedown roll around the block was succesful but needs a bunch of tweaking ang tuning yet started and ran fine off kick and electric start in the garage but cylinder 1 went cold after a run up and down the street.  Got hard to start after that...was just too darn hot outdoors to investigate further.  More tuning next session.
« Last Edit: May 26, 2015, 06:39:19 AM by P.abrera »

Offline streak09

  • Enthusiast
  • **
  • Posts: 203
  • I don't know what im doing, but I'll do it anyway
Re: New guy, first build
« Reply #292 on: May 26, 2015, 09:48:02 AM »
Very nice! Its a sweet feeling hearing them fire up! Congrats, on to the fun part of tuning.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: New guy, first build
« Reply #293 on: May 26, 2015, 09:56:40 AM »
This has come together nicely.  You've definitely put in some sweat into the build. 
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline mystic_1

  • Really Old Timer ...
  • *******
  • Posts: 6,071
  • 1970 CB750K
Re: New guy, first build
« Reply #294 on: May 26, 2015, 10:00:15 AM »
Maganda!

Bike has a good overall look IMHO.  In other words, it looks like a nice cohesive whole, and not just a random assembly of styles and parts like you see on some bikes.

You've done very well.

mystic_1
"A ship in harbor is safe, but that is not what ships are built for."
- John Augustus Shedd

My build thread:  http://forums.sohc4.net/index.php?topic=68952.0

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
Re: New guy, first build
« Reply #295 on: May 26, 2015, 06:41:43 PM »
Thanks gents almost there in the looks department. On to getting it running well now.


Sent from my iPhone using Tapatalk

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,033
  • I refuse...
Re: New guy, first build
« Reply #296 on: June 01, 2015, 05:51:41 AM »
You're gonna need to wander over to the July Bike of the Month voting poll and accept your nomination shortly...

http://forums.sohc4.net/index.php/topic,148308.0.html
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: New guy, first build
« Reply #297 on: June 01, 2015, 02:33:26 PM »
You're gonna need to wander over to the July Bike of the Month voting poll and accept your nomination shortly...

http://forums.sohc4.net/index.php/topic,148308.0.html

Wake up over in tomorrow (across the dateline) and accept!
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Free Booter

  • My Build: CB750k5
  • Hot Shot
  • ***
  • Posts: 414
  • Meh.
Re: New guy, first build
« Reply #298 on: June 01, 2015, 08:17:14 PM »
very tough industrial look to it.

Offline P.abrera

  • Hot Shot
  • ***
  • Posts: 409
Re: New guy, first build
« Reply #299 on: June 01, 2015, 09:47:30 PM »
Wow! Thanks for that, gents. Nomination is satisfying enough. Thank you, most appreciated


Sent from my iPhone using Tapatalk