Author Topic: 750F thread? (Read 165323 times)

SOHCiro · « **Reply #1175 on:** November 18, 2018, 10:48:48 PM »

Got you

Thanks for the clarification!

jambox · « **Reply #1176 on:** May 16, 2019, 03:41:43 AM »

Figured I'd give life to this thread again.

Went out for my first proper ride on the old girl yesterday since buying it back in October.

Was plesently surprised with the performance, although I'm glad I've got twin disks up front after being used to my previous bike, still calibration required on my end.

Sent from my EML-L09 using Tapatalk

70CB750 · « **Reply #1177 on:** May 16, 2019, 04:21:37 AM »

Pretty country, pretty bike.

Thanks for sharing.

Don R · « **Reply #1178 on:** May 16, 2019, 09:15:55 AM »

I dug this up while looking for old pics of my F1 double disc bike and thought it would be good for another look.

Bankerdanny · « **Reply #1179 on:** May 16, 2019, 09:41:09 AM »

Quote from: Don R on May 16, 2019, 09:15:55 AM

I dug this up while looking for old pics of my F1 double disc bike and thought it would be good for another look.

Nothing attached Don

kap384@telus.net · « **Reply #1180 on:** April 22, 2020, 07:02:41 PM »

Quote from: jambox on May 16, 2019, 03:41:43 AM

Figured I'd give life to this thread again.

Went out for my first proper ride on the old girl yesterday since buying it back in October.

Was plesently surprised with the performance, although I'm glad I've got twin disks up front after being used to my previous bike, still calibration required on my end.

Sent from my EML-L09 using Tapatalk

Looking good jambox

Jerry Rxman Griffin aka MuthaF'er · « **Reply #1181 on:** April 23, 2020, 08:26:47 AM »

Nice F

Born to be mild · « **Reply #1182 on:** April 26, 2020, 07:01:21 AM »

Stupid question really but worth a try, does anyone in the UK modifying /café-ing their F1 or F2 have any of the seat trim strip for sale? It's absence annoys me every time I look at my bike.
Cheers

seanbarney41 · « **Reply #1183 on:** April 26, 2020, 09:45:25 AM »

Quote from: Born to be mild on April 26, 2020, 07:01:21 AM

Stupid question really but worth a try, does anyone in the UK modifying /café-ing their F1 or F2 have any of the seat trim strip for sale? It's absence annoys me every time I look at my bike.
Cheers

those are real hard to get a hold of...someone really needs to start reproducing some f specific stuff

BenelliSEI · « **Reply #1184 on:** April 26, 2020, 06:08:58 PM »

Nice! Never seen this thread. Took a while to skim through it....... here’s mine, upside down as usual! Why is that? If you tap on my photos, to expand, they are right side up. Weird.

Doobie · « **Reply #1185 on:** April 27, 2020, 08:54:14 AM »

One of the nicest I've ever seen

kap384@telus.net · « **Reply #1186 on:** April 27, 2020, 02:05:11 PM »

Quote from: BenelliSEI on April 26, 2020, 06:08:58 PM

Nice! Never seen this thread. Took a while to skim through it....... here’s mine, upside down as usual! Why is that? If you tap on my photos, to expand, they are right side up. Weird.

Great looking 'F'

BenelliSEI · « **Reply #1187 on:** April 27, 2020, 05:00:13 PM »

Thanks! Finding an EXCELLENT set of pipes (on this forum) and an equally nice muffler, really finished the restoration.

david 750f · « **Reply #1188 on:** September 26, 2020, 06:03:27 AM »

Keeping this thread alive!! Installed my NOS head pipes

Terry in Australia · « **Reply #1189 on:** September 26, 2020, 06:26:28 AM »

Quote from: david 750F on September 26, 2020, 06:03:27 AM

Keeping this thread alive!! Installed my NOS head pipes

Well don't lean it over too hard in a right hander mate, I bought a chicken yellow F0 just like yours brand new in 1978 (it was a '75 model, but dealers couldn't move them, so I got a big discount) and the first time I went through some "S" bends, the big bulbous muffler grabbed the tarmac and threw me and my passenger down the road. I threw it away and bought an RC 4 into 1 and never had that problem again.

david 750f · « **Reply #1190 on:** September 26, 2020, 06:38:56 AM »

Terry, it drags the collector on the right and centre stand on the left. At least the new parts don’t have wear marks yet

.. I bought those pipes years ago for cheap and never got around to installing them.

Terry in Australia · « **Reply #1191 on:** September 26, 2020, 07:02:15 AM »

No worries mate, good to see one in such good condition, just be careful when pushing it too hard two-up.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #1192 on:** September 26, 2020, 08:02:32 AM »

What a lucky find! Non-existent. Looks great. Gotta love a set of side covers like that too. Another unobtanium.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #1193 on:** September 26, 2020, 08:07:33 AM »

Yes, keep the thread current

Terry in Australia · « **Reply #1194 on:** September 26, 2020, 06:02:36 PM »

Ooher, now I'm an "F-er" again, I can post pics of my magnificent F2 here! Here's one that's been ridden hard, put away wet, and left for 10 years..........

Terry's Effing F2.2 Sunday fiddling 20 Sep 2020 5 by Terry Prendergast, on Flickr

Sdsbassist · « **Reply #1195 on:** July 23, 2021, 09:19:01 PM »

Cb750F 1975

Sent from my SM-N950U using Tapatalk

jamesw · « **Reply #1196 on:** July 24, 2021, 11:05:55 AM »

My restored F0.

Don R · « **Reply #1197 on:** July 24, 2021, 11:55:52 AM »

I have an Orange 750 F1 that was taken apart by a not too bright PO. I hope to loosely re-assemble it into a complete project bike for someone that's looking for one to rebuild.

Translations · « **Reply #1198 on:** July 24, 2021, 12:22:14 PM »

Here is my 1978 750F just went through a full engine rebuild and even added a cam for some extra pep....just need to get the fuel lines hooked up and she should be ready to fire up

Translations · « **Reply #1199 on:** July 24, 2021, 12:35:03 PM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on September 26, 2020, 08:07:33 AM

Yes, keep the thread current

Really like that Kerker Exhaust are they still making those?

News:

Author Topic: 750F thread? (Read 165323 times)