« previous next »
Pages: 1 ... 29 30 [31] 32 33 ... 46   Go Down

Author Topic: 1974 CB550. Racetech Monoshock. JMR Head. Built Engine. "BLAC"  (Read 183610 times)

0 Members and 2 Guests are viewing this topic.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #750 on: February 15, 2017, 03:42:17 PM »
Quote from: BLAC on February 15, 2017, 03:35:41 PM
rocks on the freeway can be a #$%*.  My family friend built a trailer, powder coated it, then a week after he finished it, the leading edge got chipped up after hitting a patch of loose gravel, got wet and the moisture spread under the powder coat.  He stripped it down to the metal then painted it.

Not saying that is all that common or going to happen on my bike, just saying that is one attribute of powder coat I don't love.

My trade is in industrial epoxies, done both electrostatic and lots powdercoating too, if powdercoating is done well it is the most durable coating of the lot, I'd say the prep wasn't that good if a small piece of gravel chipped the powder, it should take a much bigger hit than that.  Everyone knows someone with a "story".... ;D
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #751 on: February 15, 2017, 03:52:21 PM »
In my experience, powdercoating has withstood rocks, gas, oil and environmental exposure better than paint.  I have not seen powdercoat chip unless you drop it against the ground, hit it with a hammer or other hardened implement -- but that's just me.  As Mick says, everyone has a story. . .

FYI - I painted my last engine with VHT paint because (then) beadblasting and powdercoating the cases was a pain in the butt to make sure all of the media was cleared out.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #752 on: February 15, 2017, 03:58:20 PM »
Quote from: CB750 Cafe Racer Fan on February 15, 2017, 03:52:21 PM
In my experience, powdercoating has withstood rocks, gas, oil and environmental exposure better than paint.  I have not seen powdercoat chip unless you drop it against the ground, hit it with a hammer or other hardened implement -- but that's just me.  As Mick says, everyone has a story. . .

FYI - I painted my last engine with VHT paint because (then) beadblasting and powdercoating the cases was a pain in the butt to make sure all of the media was cleared out.

I never said it wasnt resilient or I disliked powder coat  :P Im going to powdercoat my frame.  I just dislike how you cant repair damage without redoing it all.  As far as engine cases are concerned, I agree powder coat is perfect for that application (probably better than paint when considering the gas/oil it will contact), I just prefer the look of bare metal.
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #753 on: February 15, 2017, 03:59:56 PM »
Quote from: BLAC on February 15, 2017, 03:58:20 PM
Quote from: CB750 Cafe Racer Fan on February 15, 2017, 03:52:21 PM
In my experience, powdercoating has withstood rocks, gas, oil and environmental exposure better than paint.  I have not seen powdercoat chip unless you drop it against the ground, hit it with a hammer or other hardened implement -- but that's just me.  As Mick says, everyone has a story. . .

FYI - I painted my last engine with VHT paint because (then) beadblasting and powdercoating the cases was a pain in the butt to make sure all of the media was cleared out.

I never said it wasnt resilient or I disliked powder coat  :P Im going to powdercoat my frame.  I just dislike how you cant repair damage without redoing it all.  As far as engine cases are concerned, I agree powder coat is perfect for that application (probably better than paint when considering the gas/oil it will contact), I just prefer the look of bare metal.

You can repair damaged powder without having to redo the whole thing, if you have the facilities and if you know what you are doing... 8)
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #754 on: February 15, 2017, 04:07:48 PM »
Quote from: BLAC on February 15, 2017, 03:58:20 PM
Quote from: CB750 Cafe Racer Fan on February 15, 2017, 03:52:21 PM
In my experience, powdercoating has withstood rocks, gas, oil and environmental exposure better than paint.  I have not seen powdercoat chip unless you drop it against the ground, hit it with a hammer or other hardened implement -- but that's just me.  As Mick says, everyone has a story. . .

FYI - I painted my last engine with VHT paint because (then) beadblasting and powdercoating the cases was a pain in the butt to make sure all of the media was cleared out.

I never said it wasnt resilient or I disliked powder coat  :P Im going to powdercoat my frame.  I just dislike how you cant repair damage without redoing it all.  As far as engine cases are concerned, I agree powder coat is perfect for that application (probably better than paint when considering the gas/oil it will contact), I just prefer the look of bare metal.

Nuff said.  I think we whipped that dead horse plenty!  ;)  At least it wasn't an oil or forkbrace thread!  ;D
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #755 on: February 15, 2017, 04:09:27 PM »
Quote from: CB750 Cafe Racer Fan on February 15, 2017, 04:07:48 PM
Quote from: BLAC on February 15, 2017, 03:58:20 PM
Quote from: CB750 Cafe Racer Fan on February 15, 2017, 03:52:21 PM
In my experience, powdercoating has withstood rocks, gas, oil and environmental exposure better than paint.  I have not seen powdercoat chip unless you drop it against the ground, hit it with a hammer or other hardened implement -- but that's just me.  As Mick says, everyone has a story. . .

FYI - I painted my last engine with VHT paint because (then) beadblasting and powdercoating the cases was a pain in the butt to make sure all of the media was cleared out.

I never said it wasnt resilient or I disliked powder coat  :P Im going to powdercoat my frame.  I just dislike how you cant repair damage without redoing it all.  As far as engine cases are concerned, I agree powder coat is perfect for that application (probably better than paint when considering the gas/oil it will contact), I just prefer the look of bare metal.

Nuff said.  I think we whipped that dead horse plenty!  ;)  At least it wasn't an oil or forkbrace thread!  ;D

Agreed! 

p.s. what type of oil do you recommend for your forkbrace?   :P
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #756 on: February 15, 2017, 04:11:32 PM »
Quote from: BLAC on February 15, 2017, 04:09:27 PM
Quote from: CB750 Cafe Racer Fan on February 15, 2017, 04:07:48 PM
Quote from: BLAC on February 15, 2017, 03:58:20 PM
Quote from: CB750 Cafe Racer Fan on February 15, 2017, 03:52:21 PM
In my experience, powdercoating has withstood rocks, gas, oil and environmental exposure better than paint.  I have not seen powdercoat chip unless you drop it against the ground, hit it with a hammer or other hardened implement -- but that's just me.  As Mick says, everyone has a story. . .

FYI - I painted my last engine with VHT paint because (then) beadblasting and powdercoating the cases was a pain in the butt to make sure all of the media was cleared out.

I never said it wasnt resilient or I disliked powder coat  :P Im going to powdercoat my frame.  I just dislike how you cant repair damage without redoing it all.  As far as engine cases are concerned, I agree powder coat is perfect for that application (probably better than paint when considering the gas/oil it will contact), I just prefer the look of bare metal.

Nuff said.  I think we whipped that dead horse plenty!  ;)  At least it wasn't an oil or forkbrace thread!  ;D

Agreed! 

p.s. what type of oil do you recommend for your forkbrace?   :P

Come on, guys!  It's all ball bearings these days!

Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #757 on: February 16, 2017, 03:20:03 AM »
After powdercoating my frame, I noticed a blemish that bothered me, where I didn't finish the grinding adequately. I had my painter blend it out, and painted that section in perfectly matching acrylic enamel paint. Powdercoated frames can be touched up.


Sent from my iPhone using Tapatalk
Logged

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #758 on: February 16, 2017, 10:01:36 AM »
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,009
  • I refuse...
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #759 on: February 16, 2017, 10:51:24 AM »
Quote from: BLAC on February 15, 2017, 04:09:27 PM
p.s. what type of oil do you recommend for your forkbrace?   :P
All depends upon whether the brace is painted or powder coated.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #760 on: February 16, 2017, 10:51:51 AM »
LOL, beating a dead horse. I get it.


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,009
  • I refuse...
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #761 on: February 16, 2017, 11:00:33 AM »
Quote from: 540nova on February 16, 2017, 10:51:51 AM
LOL, beating a dead horse. I get it.
It's not beating a dead horse; it's called persistence until we persuade you to do the right thing. Like vapor blasting your cases.  ;D

Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #762 on: February 16, 2017, 11:11:10 AM »
Let the man build the bike the way he wants.. Not long ago 1/2 the bikes in the world ran bare cases and heads..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,009
  • I refuse...
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #763 on: February 16, 2017, 11:26:03 AM »
Quote from: 754 on February 16, 2017, 11:11:10 AM
Let the man build the bike the way he wants.. Not long ago 1/2 the bikes in the world ran bare cases and heads..
Get up to speed, Frank. We are all having fun with each other  ::)
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #764 on: February 16, 2017, 12:09:41 PM »
Quote from: calj737 on February 16, 2017, 11:26:03 AM
Quote from: 754 on February 16, 2017, 11:11:10 AM
Let the man build the bike the way he wants.. Not long ago 1/2 the bikes in the world ran bare cases and heads..
Get up to speed, Frank. We are all having fun with each other  ::)


haha All in good fun!  and its not "beating the dead horse" its "beating the living bryan into submission"   :P

PS im off to Racetech with my frame!
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #765 on: February 16, 2017, 01:00:59 PM »
Quote from: BLAC on February 16, 2017, 12:09:41 PM
Quote from: calj737 on February 16, 2017, 11:26:03 AM
Quote from: 754 on February 16, 2017, 11:11:10 AM
Let the man build the bike the way he wants.. Not long ago 1/2 the bikes in the world ran bare cases and heads..
Get up to speed, Frank. We are all having fun with each other  ::)


haha All in good fun!  and its not "beating the dead horse" its "beating the living bryan into submission"   :P

PS im off to Racetech with my frame!

Those boys will have that monoshock sorted in no time.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #766 on: February 16, 2017, 02:55:49 PM »
Just pulling up now, I'll report with news in a few :)
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #767 on: February 16, 2017, 03:50:48 PM »
Home for the week

Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline Camrector

  • Hot Shot
  • ***
  • Posts: 580
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #768 on: February 16, 2017, 11:05:15 PM »
Lucky lady! I'd like to live there too for a week!
Logged

Offline Ericcb750

  • Hot Shot
  • ***
  • Posts: 449
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #769 on: February 17, 2017, 12:36:02 AM »
This bike is just going to be freakin nasty!! i am so excited to see this come together..... may have to make a journey sometime out to Cali to meet and ride with some of you west coast fellas in person.... Don, Brian, etc.  #$%* maybe do a CB;s ride out (instead of babes ride out) haha.

these bikes are so awesome.
Logged
1978 CB750K
1978 CB750F super sport
2005 Sportster 1208

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #770 on: February 17, 2017, 12:43:41 AM »
Heck ya! Just let me put this pile of parts together first  :P
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #771 on: February 17, 2017, 11:46:47 AM »
Im not sure what I am going to go yet for my color scheme on the bike, and next week I will have to let them know what color I want the spring on my monoshock to be...

Im thinking just a chrome spring would look good with everything, or doing Honda red, which would pop as well..

I would love to hear ideas!
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline Camrector

  • Hot Shot
  • ***
  • Posts: 580
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #772 on: February 17, 2017, 12:59:38 PM »
I vote red or black
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #773 on: February 17, 2017, 02:13:58 PM »
Always bet on black.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 694
Re: 1974 CB550. Monoshock. Engine Build. "BLAC"
« Reply #774 on: February 17, 2017, 02:17:39 PM »
Quote from: Camrector on February 17, 2017, 12:59:38 PM
I vote red or black
My fear is black will disappear, not that that is the worst thing in the world.  The thought for the polished is to give the bike some symmetry.  The wheels are both polished, the front folk legs (tubes and lowers) are polished, I think it may look nice popping that color on the rear monoshock as well, but I still need to photoshop it.
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html
Pages: 1 ... 29 30 [31] 32 33 ... 46   Go Up
« previous next »