Topic: Bars that clear lowered forks?

[ratkiller]

Any body know of an aftermarket handlebar that will clear lowered fork tubes? 
I want to try lowering the the front end, to see how the bike handles, before I make the decision to cut the fork tubes. It would be nice to be able to continue to use the stock bar clamps with out going to clip-ons.

[754]

77 and 78  750 trees allow you to slide up as high as you want.. you then have to side tank back slightly  or mod the stops..

[ratkiller]

Sorry, I forgot to mention this is on a 80’ cb750f super sport.

[robvangulik]

That's a DOHC?

[Alan F.]

How about some simple bolt on risers for your existing bars?
https://www.ebay.com/itm/Handlebar-Riser-Mount-Lifting-20mm-30mm-40mm-Fit-For-Aprilia-Shiver-2008-2018/183856686263?hash=item2aceb664b7:g:Os4AAOSwi7BdDR0Y

I've used this type long term for comfort, they work great.

[Don R]

 Handlebar set backs work too.

[madmtnmotors]

Why go through all the trouble of cutting the forks? They can easily be lowered without cutting anything:

http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html

I did this to mine without cutting the springs. Adds a bit of preload when reinstalling the fork cap, but I had no issues installing the fork cap, nor removing and replacing the spacer to make the forks even shorter on my dragbike. Easily returned to stock length.

[Gurp]

If you are handy with a welder make a set.5 in section on straight bar. bring up the support bars in the center. if you're not running a stock dash. if you are look into narrow window bars.