Author Topic: 79' KZ750 .... "Gutter Brat" (Read 105305 times)

Spikeybike · « **Reply #325 on:** June 05, 2011, 04:53:08 PM »

any idea's for a title for this?

How to Shake the #$%* out of Your Camera For Under $500

Frankencake · « **Reply #326 on:** June 05, 2011, 08:00:59 PM »

How to shake the #$%* out of your camera for under $500.

Spikeybike · « **Reply #327 on:** June 05, 2011, 08:10:06 PM »

HAHAHAHAHAHAHAHAAAA .... i almost lost that #$%*er more than a few times

four_shot · « **Reply #328 on:** June 05, 2011, 09:25:47 PM »

Quote from: Dustreel Revlooshun Cupcake on June 05, 2011, 08:00:59 PM

How to shake the #$%* out of your camera for under $500.

lmao!

jacquesleclochard · « **Reply #329 on:** June 06, 2011, 03:15:00 AM »

What's that tune, Spikey?

Spikeybike · « **Reply #330 on:** June 08, 2011, 06:10:09 PM »

it's the gutter demons (it says it right at the end)

So lil miss Inkscars has inadvertently renamed this bike "Gutter Brat"

i like it when bikes kinda name themselves (i'm the same way with pets too) and when she suggested it for the video title , it was like a slap in the face and a light bulb over my head at the same time .... it's such a fitting name ...... perfect

Zaipai · « **Reply #331 on:** June 08, 2011, 08:20:00 PM »

Quote from: Spikeybike on June 08, 2011, 06:10:09 PM

it's the gutter demons (it says it right at the end)

So lil miss Inkscars has inadvertently renamed this bike "Gutter Brat"

i like it when bikes kinda name themselves (i'm the same way with pets too) and when she suggested it for the video title , it was like a slap in the face and a light bulb over my head at the same time .... it's such a fitting name ...... perfect

+1 on the title..

.: Scott :.

four_shot · « **Reply #332 on:** June 09, 2011, 06:20:30 PM »

Rusty Nuts was a bit of a mouthful.

Retro Rocket · « **Reply #333 on:** June 09, 2011, 07:17:07 PM »

Quote from: four_shot on June 09, 2011, 06:20:30 PM

Rusty Nuts was a bit of a mouthful.

And leaves a bad taste in your mouth....

Frankencake · « **Reply #334 on:** June 09, 2011, 07:40:48 PM »

Quote from: Retro Rocket on June 09, 2011, 07:17:07 PM

Quote from: four_shot on June 09, 2011, 06:20:30 PM
Rusty Nuts was a bit of a mouthful.

And leaves a bad taste in your mouth....

Just a couple of dudes. Hangin out. Naming a bike.
Not that there's anything wrong with that.

four_shot · « **Reply #335 on:** June 10, 2011, 10:52:25 AM »

Quote from: Dustreel Revlooshun Cupcake on June 09, 2011, 07:40:48 PM

Quote from: Retro Rocket on June 09, 2011, 07:17:07 PM
Quote from: four_shot on June 09, 2011, 06:20:30 PM
Rusty Nuts was a bit of a mouthful.

And leaves a bad taste in your mouth....

Just a couple of dudes. Hangin out. Naming a bike.
Not that there's anything wrong with that.

LMAO! I just reread my post and saw how gay it sounded!

jacquesleclochard · « **Reply #336 on:** June 20, 2011, 02:57:07 AM »

@ Spikey! Class act!

seanbarney41 · « **Reply #337 on:** June 20, 2011, 01:46:03 PM »

hmmm...nice to hear good music in here

Spikeybike · « **Reply #338 on:** June 20, 2011, 08:01:03 PM »

thats awesome ...is it dutch , local to you? or something else?

soooooooooooooo..........http://forums.sohc4.net/index.php?topic=17422.msg1018862#msg1018862

sigh.......i have to decide on yet another taillight

four_shot · « **Reply #339 on:** June 21, 2011, 08:34:11 PM »

Was the plate still attached to the bracket or did that get found?

Spikeybike · « **Reply #340 on:** June 21, 2011, 08:44:18 PM »

went back again today , still didn't find any of it .. the bracket, the plate , the light ... poof gone

Old75_ratafe · « **Reply #341 on:** June 22, 2011, 11:46:31 PM »

Gravel gnomes.... Who do you think pushed the tire when you hit the gravel...

Spikeybike · « **Reply #342 on:** June 26, 2011, 09:03:01 AM »

so the final word is in ... and after dumping this bike , i am quite proud of my work , and that some of my ideas worked flawlessly .. i said i wanted this bike to look utilitarian , but it really IS utilitarian

so the reason the damage isn't a lot worse is , when building the bike i used heavy wall industrial grade tubing , so my pegs ,shifter, and brake pedal acted like sliders , ans saved the motor .. the handlebars also didn't bend at all
you can see the driver peg bent in only slightly , pretty good ,considering it took the weight of the bike

some lil scratches to fix

the mirror didn't make it

broke the bracket right off at the weld .. gonna have to weld the next one alot more

was tryin to get the light shinin in the right spot , to show that the dent is gone

i couldn't feather-edge the green without messing up the swirl , so there is a pretty hard line right here
i tried to smooth it out as much as i could, but ... it is what it is

same concept , but in a lil bit different location (a few inches farther back than before, it'll make more sence once ya see it with the wheel there)

lets see the gravel gnomes try and get that one .. welded the #$%* out of it ,used heavier steel (1/4") probly bomb proof

had a pretty fun saturday

oh and i ordered tires , went with the Kenda's , i really wanted the Dunlop 404's but me being a cheap ass , combined with me being a broke ass ...... left me few options ... and now that this is my only transport (truck died) i gotta get it on the road like, yesterday , ya know

Spikeybike · « **Reply #343 on:** June 26, 2011, 11:21:11 AM »

forgot one

i painted the headlight ears with the bed liner, looks better that way i think

... and my grand total after ordering tires , and some other little stuff .....is $561.00(FINALLY found a source for main jets, these Minkuni jets are such a #$%* to find in the states for some reason..and thats not including the mirror i took from the honda, that i have to replace still

)

bluesmoke69 · « **Reply #344 on:** June 26, 2011, 08:17:00 PM »

Sorry to here about the accident. Hope your not hurt that's the important thing. Like what your doing with the bike!!

Spikeybike · « **Reply #345 on:** July 02, 2011, 11:11:05 AM »

i found this vid in the nightly youtube thread ... skip to 3:50 ... thats almost exactly how my wreck was

Chris "Teach" Mcneil aboard the Twisted Throttle equipped BMW F800GS

bill440cars · « **Reply #346 on:** July 03, 2011, 05:39:27 PM »

Sorry Spikey, just now checking into this Kawa build and, as usual, you have a style all your own. And I like Your Style man!

You REALLY have a way of pulling things together!

RatFink84 · « **Reply #347 on:** July 03, 2011, 09:09:48 PM »

I love that Oblivions track

Spikeybike · « **Reply #348 on:** July 04, 2011, 01:39:49 PM »

got the new tires on ,thay are Kenda Crusiers ...and i temporarily stole the taillight from the honda ,

...and now all of a sudden my petcock wants to piss gas everywhere (hence the rag sittin there) ...if it's not one thing it's another right

i also went at the hub with a scotchbrite .. ya can't really tell in this pic , but if you compare the hub with the motor cases you'll kinda see the difference
,now i have to do it to the rest of the alloy stuff

and thanx for the comments Bill .. your input is appreciated as usual

bill440cars · « **Reply #349 on:** July 04, 2011, 02:10:19 PM »

Quote from: Spikeybike on July 04, 2011, 01:39:49 PM

got the new tires on ,thay are Kenda Crusiers ...and i temporarily stole the taillight from the honda ,

...and now all of a sudden my petcock wants to piss gas everywhere (hence the rag sittin there) ...if it's not one thing it's another right

i also went at the hub with a scotchbrite .. ya can't really tell in this pic , but if you compare the hub with the motor cases you'll kinda see the difference
,now i have to do it to the rest of the alloy stuff

and thanx for the comments Bill .. your input is appreciated as usual

Sure thing, I'm really liking those tires too! Might have to look into some of those myself.

News:

Author Topic: 79' KZ750 .... "Gutter Brat" (Read 105305 times)