Author Topic: Cobra motor disassembly and rebuild (Read 109869 times)

Tintop · « **Reply #600 on:** September 11, 2016, 02:10:15 PM »

Condolences to you and your family Mike. It would seem your mechanical talents are hereditary.

NickO · « **Reply #601 on:** September 11, 2016, 02:28:23 PM »

Sincere condolences Mike.

bwaller · « **Reply #602 on:** September 11, 2016, 04:22:48 PM »

Mike my family & I send along our sincerest condolences. Knowing what I do about your character, it's safe to say your dad was a cool guy. Sorry for your loss.

dragracer · « **Reply #603 on:** September 11, 2016, 04:28:58 PM »

Thanks for sharing that with us.

Fastbike · « **Reply #604 on:** September 11, 2016, 05:15:09 PM »

Sorry for your loss, Mike. My condolences. Fathers are special people.

Bill/BentON Racing · « **Reply #605 on:** November 16, 2016, 09:05:46 PM »

LMAO, you can change 1/2 a ring by pulling clutch, and the primary drive link. ..wow!

dragracer · « **Reply #606 on:** November 17, 2016, 12:16:50 AM »

Pull the oil pan and you'll find the rest---- bottom end failure

Bill/BentON Racing · « **Reply #607 on:** November 17, 2016, 03:54:02 AM »

Yep, it's next.

MRieck · « **Reply #608 on:** November 17, 2016, 04:54:13 AM »

Quote from: Bill/BentON Racing on November 16, 2016, 09:05:46 PM

LMAO, you can change 1/2 a ring by pulling clutch, and the primary drive link. ..wow!

What head is sitting on that engine?

Medyo Bastos · « **Reply #609 on:** November 17, 2016, 05:04:51 AM »

billy, you going to hang that engine on the wall downstairs?

PeWe · « **Reply #610 on:** November 17, 2016, 06:09:33 AM »

Photos when cases are opened?

Bill/BentON Racing · « **Reply #611 on:** November 17, 2016, 06:24:40 AM »

The Butch Pace bad temper one! Ex guide is fine ,pulled pipe. Life has been a zoo since I got home. Cylinder wasn't cracked in early pics!

Bill/BentON Racing · « **Reply #612 on:** November 17, 2016, 06:27:24 AM »

Hell yes, I got nothing to hide. ....it was built right. Mike, no more old pistons for me...no matter who's they are, lol.

Bill/BentON Racing · « **Reply #613 on:** November 17, 2016, 09:31:47 AM »

Got two slightly used German primary chains, 25 passes est.
Other 125 MPH pieces included!

BPellerine · « **Reply #614 on:** November 17, 2016, 09:33:48 AM »

jeez bill,holes everywhere,you are a determined man!glad you ok,billp

knowsnothing · « **Reply #615 on:** November 17, 2016, 09:34:11 AM »

.......

......sorry Bill

madmtnmotors · « **Reply #616 on:** November 17, 2016, 09:57:17 AM »

Looks like more of the piston in there. Make sure not to lose any of the pieces!

Bill/BentON Racing · « **Reply #617 on:** November 17, 2016, 09:58:59 AM »

It's ok, cause I'm ok, thank God! Won't be repeating this one....Engine noise is Engine noise! My bad. Jim, get the welder fired up! LMAO, Bill Oh, Scottly. ...buttons, I'm getting old, lol. Looks like light weight pin broke!

kmb69 · « **Reply #618 on:** November 17, 2016, 10:13:09 AM »

That's some real carnage there!

madmtnmotors · « **Reply #619 on:** November 17, 2016, 10:46:33 AM »

I'm curious to see the #3 combustion chamber...

PeWe · « **Reply #620 on:** November 17, 2016, 11:05:55 AM »

WOW! Look like a maniac meat grinder went wild! Not much left to reuse, right? Crank and rods are gone too? Head + cam OK?
Thin piston pin caused it?
I'm curious when I have my engine apart, will grind upper case for bigger bore sleeves, file pistons ring gaps for 71.25mm JE pistons this weekend. German prim chains, std tensioner and Ape ultra crank... If there is anything to be aware of to protect the goodies going in.

No problem with cam chain + tensioner? My metal upper wheel w cogs had marks after cam chain.... 500km max.... std tensioner goes in next time.

No personal damages most important here! NOS old man parts difficult to find.

Bill/BentON Racing · « **Reply #621 on:** November 17, 2016, 11:35:15 AM »

Not sure if I am! Lol

Jerry Rxman Griffin aka MuthaF'er · « **Reply #622 on:** November 17, 2016, 11:43:21 AM »

Did it drain the oil tank too?

dragracer · « **Reply #623 on:** November 17, 2016, 11:43:55 AM »

I hate being right sometimes.

bwaller · « **Reply #624 on:** November 17, 2016, 12:12:45 PM »

Man oh man, a knock is a sign of trouble alright but how long did you run it when it started coming apart? Wow Bill is there anything good left? Any gearbox damage, cam ok?

News:

Author Topic: Cobra motor disassembly and rebuild (Read 109869 times)